Push the fuel line disconnect tool toward the female side of the connection. This will release the quick disconnect fitting and disengage the male connector Pull the fuel line to one side to disconnect them. The line should come off without much effort.
How to remove fuel line from fuel line connector?
You put the fuel line through the slot below the fitting, push it up inside the connector to release the fitting. An auto parts store should have a GM fitting removal tool for a couple bucks.
What are the different styles of the fuel line disconnect tool?
There are different styles of the fuel line disconnect tool. Common ones include the clothes pin design, the scissor like style, and the fuel line disconnect pliers. Each design has its benefits, although not always.
Do all new cars have fuel lines with 90* fittings?
All new cars have this type of fuel line and fittings I've been told. Saves you the $100 on the Dorman Nylon compression tool. However, I'm not sure how it will work out with 90* fittings.
Do all new cars have nylon fuel lines?
Pretty ingenious method I found tonight while doing some research on Nylon fuel lines. All new cars have this type of fuel line and fittings I've been told. Saves you the $100 on the Dorman Nylon compression tool.
How do you quickly disconnect a fuel line?
0:134:21How to Disconnect Common Fuel Line Fittings - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd location the push on the other side. So we're going to push this from both directions to releaseMoreAnd location the push on the other side. So we're going to push this from both directions to release it from the use. This type of push connector only pushes from one side as you can see the location.
How do you release Ford fuel line clips?
0:292:50How to Remove THOSE PESKY Ford Fuel Lines - ALL MODELS! - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's going to take quite a bit of wiggling. Quite a bit of finagling. But eventually. Once you pushMoreIt's going to take quite a bit of wiggling. Quite a bit of finagling. But eventually. Once you push down in the correct way the line will come apart.
How do you remove a fuel filter from Quick Connect?
1:305:02How To Replace a Ford Fuel Filter (homemade disconnect tool)YouTubeStart of suggested clipEnd of suggested clipNow take your quick disconnect tool and slide it over the metal pipe on the fuel filter. Then takeMoreNow take your quick disconnect tool and slide it over the metal pipe on the fuel filter. Then take the quick disconnect tool and push it into the fuel line as you push the fuel line towards the tool.
How do I remove a rusted fuel line fitting?
0:022:00How to Remove a Rusted Fuel Line Connector - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf there is excess rust around the quick connect fitting you may be able to free it up by sprayingMoreIf there is excess rust around the quick connect fitting you may be able to free it up by spraying around the connection. And working the line back and forth.
How do you take a fuel line off a fuel pump?
3:5017:00How to disconnect CAR/TRUCK fuel pump EASY!!!! - YouTubeYouTubeStart of suggested clipEnd of suggested clipAs you can see as I press that button those two side teeth are going in and this will allow you toMoreAs you can see as I press that button those two side teeth are going in and this will allow you to actually remove the fuel pump line from the fuel pump. So what you would want to do with this type is
How do you remove stubborn fuel lines?
1:382:43DIY: Removing a Push Lock Fuel Line Fitting - YouTubeYouTubeStart of suggested clipEnd of suggested clipBasically want to do is you can see there is a cutout on the one side here to snap it over top ofMoreBasically want to do is you can see there is a cutout on the one side here to snap it over top of the fuel line there. So once you snap it over top here you want to push this inside.
How do you remove a tight fuel filter?
The trick to remove a stuck filter is to put a piece of sand paper under the wrench band, doubling it back so sand is on both side's, doing that, it makes the band a little tighter and grip. Sandpaper grit is your choice, but 60 or 80 grit works best.
What tools do I need to change a fuel filter?
Tools RequiredDrain pan.Fire extinguisher.Garden hose connected to water source.Needle-nose pliers.Safety glasses.Slot screwdriver.Vehicle ramps (if fuel filter is mounted underneath the vehicle)