How to Grease an Echo SRM 2400 Weed Trimmer
- Turn your Echo weed trimmer off and allow it to cool. Place it on a flat work surface such as a sidewalk, driveway or workbench.
- Wipe all debris and grass clippings off the weed trimmer's head, guard and gear box. ...
- Put a large towel underneath the head to keep your work surface clean.
How do you Grease an echo weed trimmer?
Greasing your trimmer properly only takes a few minutes and extends the tool's life. Turn your Echo weed trimmer off and allow it to cool. Place it on a flat work surface such as a sidewalk, driveway or workbench. Wipe all debris and grass clippings off the weed trimmer's head, guard and gear box.
Do You Grease the head gear box of a trimmer?
grease is good for anything that turns or is high speed, so it cant hurt to put grease all over the trimmers rotating parts. Why are you going to take the head apart? No grease goes in the head... Yeah I was gonna say, never heard of anyone greasing the head gear box of a trimmer???
How do I lubricate the drive shaft of my electric trimmer?
If you have a straight-shaft trimmer model, unscrew the screws from the gear box, which is on the bottom of the shaft. Then simply tug on the drive shaft from the bottom to pull it free; the drive shaft is inside the drive shaft housing or handle. The drive shaft will be dirty. Rub lubricant all along the length of the drive shaft with a rag.
How do you clean a craftsman weed trimmer?
Wipe all debris and grass clippings off the weed trimmer's head, guard and gear box. The gearbox is on the top of the trimmer guard where the shaft attaches to the cutting head. Put a large towel underneath the head to keep your work surface clean.
How do you grease Echo Weedeater head?
1:072:14How to grease a Stihl strimmer head/brush cutter/weed eater/whippyYouTubeStart of suggested clipEnd of suggested clipAnd then you just want to put your nut back in it's as simple. As that turn her up. Say get a fewMoreAnd then you just want to put your nut back in it's as simple. As that turn her up. Say get a few more spins. Make sure she's tight. And then you're off to go and that's it you've greased that string.
What kind of grease use the Echo hedge trimmer?
Add 35-50 grams of Echo Lube or another white lithium grease to gear case. Gear case will be ½ to ¾ full of grease when all components are installed.
How do you grease an Echo hedge trimmer?
0:012:13How to maintain and grease the echo hsc 266 hedge trimmers - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt. You don't I sent one we're going to pump it and pump and pump until the grease comes out theMoreIt. You don't I sent one we're going to pump it and pump and pump until the grease comes out the bottom.
How do you bump feed an Echo trimmer?
0:162:08Echo SRM 225 - How to get more STRING to feed out of the trimmer ...YouTubeStart of suggested clipEnd of suggested clipSo all you need to do is simply bump the head it's actually a spring-loaded. Head let me get upMoreSo all you need to do is simply bump the head it's actually a spring-loaded. Head let me get up close you can see that.
Can I use WD-40 to lubricate hedge trimmer?
Lubricating the Hedge Trimmer Blades with WD-40 After you are done cleaning your hedge trimmer and have thoroughly dried off any residue, you should also remember to lubricate the blades. To do so, get your hands on a dry cloth and use it to reapply a coat of WD-40 on the blades with an even distribution.
What is the best lubricant for hedge trimmer blades?
Often, the manufacturer will recommend an oil that works well on its product. Tanaka, for instance, recommends WD-40 on its trimmer. In general, though, any type of tool oil can be used to lubricate the blades.
How do I keep my hedge trimmers sharp?
To sharpen hedge trimmer blades at home, first wear suitable protective clothing. Use a flat file on each blade, only applying it towards the cutting edge. Make sure you use the same number of strokes on each blade. Follow up by using a whetstone to smooth the burrs on all the blades.
How do you take care of hedge trimmer blades?
1:022:11Why You Need to Take Care of Your Hedge Trimmer Blades After Every ...YouTubeStart of suggested clipEnd of suggested clipI've seen everything used from oil kerosine mixes to cooking sprays. But I would recommend using anyMoreI've seen everything used from oil kerosine mixes to cooking sprays. But I would recommend using any lubricant that is safe to use on plants.
How do you clean and sharpen electric hedge trimmers?
0:583:56How To Sharpen and Clean Hedge Trimmer Blades (The Easy Way)YouTubeStart of suggested clipEnd of suggested clipBut pretty much all you do is take your grinding stone. And go back and forth. Across the hedgeMoreBut pretty much all you do is take your grinding stone. And go back and forth. Across the hedge trimmers like that and you end up with a nice clean. Area on there too.
How do you fill a bump head?
0:291:40How to install new trimmer line on a traditional bump head - YouTubeYouTubeStart of suggested clipEnd of suggested clipFind the two holes on top of the inner reel and insert both ends of the line into one of the holes.MoreFind the two holes on top of the inner reel and insert both ends of the line into one of the holes. Pull. The line through until two to three inches. Remain.
How do you get a line out of speed feed?
0:339:31Echo Speed Feed® Trimmer Head: Loading New Line ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou could turn it in and pull it. Goes into a little indentation. There okay and now you take yourMoreYou could turn it in and pull it. Goes into a little indentation. There okay and now you take your your head and you turn it quite a turn of clockwise. Okay. There goes came right off.
How do you feed a trimmer line?
1:087:06How to Replace Trimmer Line - YouTubeYouTubeStart of suggested clipEnd of suggested clipThese tell us the direction that the line needs to be wrapped. So we'll take our piece of trimmerMoreThese tell us the direction that the line needs to be wrapped. So we'll take our piece of trimmer line insert it into that hole to get it started wrap the direction of the arrows.
How to remove a gearbox grease plug?
Place an 8 mm wrench on the gearbox grease plug on the right side of the head from an operating position. Turn the plug counterclockwise to loosen and remove the plug. Set the plug on the towel. Fill the gearbox grease with lithium base grease.
Where to place weed trimmer?
Place it on a flat work surface such as a sidewalk, driveway or workbench. Wipe all debris and grass clippings off the weed trimmer's head, guard and gear box. The gearbox is on the top of the trimmer guard where the shaft attaches to the cutting head.
When was the first weed eater invented?
The Weed Eater company's origin dates to 1972 , and the first Weed Eater was based on the design of a car-wash brush. Also called weed whackers, line trimmers and string trimmers, Weed Eaters are used to knock down tall weeds and to edge grass along objects such as trees.
Do weed eaters need grease?
And although gas-powered Weed Eaters and other trimmers need oil, they don't need grease -- at least not in the engine. What they occasionally need is lubricant applied onto the drive shaft. The Weed Eater company recommends using its brand of lubricant, but you can use any type of shaft lubricant.
