How Should You Hang the Speakers?
- Step 1: Mark Out Your Mounts Position On the Ceiling You have to hold the speaker in the position of mounting and mark the ceiling with a pencil or chalk. ...
- Step 2: Drill Holes Now you need to drill the pilot hole in the ceiling for each hole. ...
- Step 3: Mount The Speakers
Full Answer
How to attach speaker arm to speaker?
How to secure speaker plate?
How to reattach speaker mount arm?
How does a ball shaft attach to a ceiling mount?
How to connect speakers to receiver?
How to drill holes in a speaker?
How much does a speaker mount weigh?
See 4 more
About this website
Hanging heavy large speakers from the ceiling... Any ideas?
B&W 802D,HTM1D,803s sides & Sig 8NT DV.SCMS front heights,805s rears and rears heights, 2 x Aerial SW12 subs, 2x PHC LFC15-sm subs, Datasat RS20i, Auro 3D Datasat RA7300, 3 x ADA PF-2502, Oppo BDP 93, Optoma HD91+ / 82" screen, Virgin TiVo, Nad M50, Apple TV3, Sky Now TV,Shunyata Hydra 6, 2 x AG1500.8TB RAID
Where should the loudspeakers be placed in a church?
In a perfect world, it’s best practice to place a church’s main loudspeakers in a central cluster above the front edge of the chancel riser.
Why do loudspeakers need to be delayed?
Because sound traveling through the air takes time, the second set of loudspeakers will need to use a time delay so that the sound traveling from the chancel coincides perfectly with the sound emanating from the second set of loudspeakers. DON'T MISS A STORY.
Where should the speakers be located on a stage?
The main speakers should be located at the front of the stage and just in front of the most forward microphone. This is to keep down feedback. The size should be judged by the size of the room and the quality of the sound needed. Also, keep in mind what will be sent through these speakers.
Where does sound come from in a church?
In a traditional venue, sound should come from the stage and instruments. This may seem obvious but I have encountered Churches where the sound system speakers were in the back of the church hanging on the wall, pointing toward the Pulpit! If you think about it, walking into a building with a stage or pulpit, you would expect the sound to come from there, not the back. People will tend to seat themselves according to how close they are to the stage so they can control the depth of their involvement. For example some may not like loud volume and seat themselves accordingly. Having speakers in unusual places can ambush the unsuspecting person and leave them with a negative experience.
How to make a sound system quieter?
Another technique being used is to add an instrument into the sound system to make is quieter. For example, say the electric guitar player tends to play too loud, you can have him or her face their amp to the back of the stage with a microphone on it. This way, the amplifier acts as their monitor and the sound system can put the proper amount of guitar into the mix out front.
What is the next component of a soundboard?
Equalizers. The next component in the system would be the Equalizer. Typically the output of the soundboard would go to Equalizers (EQ) which are used to tailor the sound system to the room acoustics. One example would be to compensate for feedback frequencies caused by the room acoustics.
How far away from the stage can a microphone be wired?
Professional microphones are wired as low impedance. Low impedance wiring allows for longer cables and lower noise. The sound board can typically be 100′ from the stage. This means the cables from the microphone to the board equal 100′ or more. Only low impedance wiring should be used for any length of cable over 20′.
Why are stereo speakers so common?
First, source material such as CD’s, Cassette tapes, and effects are in stereo. Also, main speakers are being placed up high in the center of the stage so that the separation of left and right is minimal.
Why do you need separate channels for each mic?
A separate channel is needed for each mic, instrument etc. Secondly, the number of tone controls, auxiliary and effect sends on each channel. Tone controls are used to fine tune each channel and the more controls available, the more control you will have in fine tuning the sound.
Why do I hang my speakers in the air?
Getting your loudspeakers in the air will help with this. When possible, I prefer hanging speakers because I can point them down at a slight angle. Elevated speakers pointed straight to the back of the room can cause very harsh acoustic reflections off the back wall, especially in a short room.
How to keep loudspeakers on stage?
If you must have the loudspeakers on stage, ensure that the coverage patterns of the horns are not directed at any vocal or instrument microphones. Violating this rule will surely lead to feedback problems.
What is the role of acoustics in a room?
Getting “the right loudspeaker” will not always solve your sound system problems. The acoustics of your room play a huge role in determining how clear and balanced your system sounds.
Can you put subwoofers on the floor?
Placing subwoofers on the floor is fine and normally preferred because bass frequencies are not easily controlled or absorbed in most rooms. High frequencies, on the other hand, are easily absorbed and reflected, so you need to aim these very carefully. Getting your loudspeakers in the air will help with this.
Can EQ fix bad speaker placement?
EQ and digital processing magic cannot fix fundamentally bad speaker placement . There is absolutely a time and place for using several loudspeakers in your sound system. It’s important to be very thorough in how you select your loudspeakers and plan your loudspeaker locations.
Can a church have loudspeakers?
While your church might hope that it would be this simple, it isn’t. There are many “rules” for loudspeaker placement that are blatantly violated every week — especially with portable church sound systems.
Can you use two loudspeakers in a room?
Sure, you may achieve more sonic coverage of the listening area, but that may come with a decrease in overall sound quality. If you can use only one or two loudspeakers to cover a room, then you should do it. Adding more loudspeakers will add more acoustic complexity.
How to attach speaker arm to speaker?
Attach the mount arm to the speaker if using one pre-drilled hole. First, you may need to remove the speaker plate from the mounting arm. Check your manufacturer’s instructions to determine if this step is required. Then, insert the end of the mounting arm into the pre-drilled hole on the back of your speaker. Use a wrench to tighten the nut that will secure the arm to the speaker.
How to secure speaker plate?
Secure the speaker plate to the back of the speaker if needed. Hold the speaker plate to the back of the speaker, lining up the newly drilled holes with the holes in the plate. Insert the required screws and use a screwdriver or a power drill to secure the screws into the speaker.
How to reattach speaker mount arm?
In some cases, the end of the mount arm will have a ball shaft attached that needs to be pushed back into the socket joint on the ceiling plate. Then, the ball shaft is secured to the socket joint using a socket wrench or allen key to tighten the tension bolt.
How does a ball shaft attach to a ceiling mount?
That ball shaft attaches to the ceiling mount through a socket joint secured by a tension bolt.
How to connect speakers to receiver?
You have a couple of options for doing this. One option is to simply run the wire on the outside of the ceiling and wall. Another option is to run the wire behind the ceiling and wall. While a final option is to connect your speakers using wifi or Bluetooth so there are no wires involved.
How to drill holes in a speaker?
Drill 2 holes in the back of your speaker if required. Hold the speaker plate up to the back of the speaker and use a pencil to mark the 2 hole locations. Remove the plate, then use a power drill and bit to drill holes in the back of the speaker. The material on the back of the speaker shouldn’t be very thick, so you won’t need to drill too deep.
How much does a speaker mount weigh?
Therefore, it’s important to know the approximate weight of your speakers before buying the mounts. Most mounts are rated in 5 lb (2.3 kg) increments, so you can estimate the weight if needed.