How to Install a Closet Rod
- Measure your closet. Specifically, the area (wall to wall) where you plan on placing the rod. As you measure, mark with a pencil the exact spots for drilling. ...
- Decide whether you will purchase a rod or make your own. ...
- Install support studs. ...
- Attach and drill brackets. ...
- Place each socket where you made the marks... ...
How high above a closet rod should the shelf be placed?
If a single closet rod is planned, it is commonly placed 68 inches above the floor with a shelf above the rod. This shelf can be up to 16 inches wide to provide more storage. Combined with the top shelf, this provides two shelves above the single closet rod.
How many hangers you need for your closet?
How many hangers fit in a closet? If you are planning to hang only t-shirts which do not take much space, then you may hang up to 19 hangers per foot. However of you want to hang jackets and suit that are bulky you may make space for 15 hanger per foot. Simple shirts and casual to format dresses would allow you to use 15 to 16 hangers per foot.
What is the standard depth of hanging closet rods?
- Blouses and Shirts: You need 1 inch of space on the clothing rod per item for blouses and shirts.
- Folded pants and skirts: For pants and skirts that you fold over a hanger, allow 1 to 1 ¼ inch of rod space per item.
- Dresses and coats: You will need 2 inches of space on the rod per item for dresses and coats.
How to install a closet valet rod?
Part 2 Part 2 of 3: Positioning the Rod Correctly Download Article
- Choose an appropriate height for the rod. In order to make the closet rod truly helpful, put it at a height that makes it accessible and useful.
- Decide how deep you want the bar to be. It's important to have it back far enough so that the hangers and clothes that are on the bar will ...
- Mark both sides of the closet. ...
How to measure a closet rod?
What happens if you cut a closet rod too short?
How deep should a closet bar be?
What are the different types of closet bars?
How tall should a rod be?
How to check for screws in studs?
Do you need to add wood supports to a closet?
See 4 more
About this website
Can I hang closet rod on drywall?
Can You Hang a Closet Rod in Drywall? You can hang a closet rod in the drywall in such a fashion that it holds your clothing without pulling out of the wall. In order to do so, it's best to use shelf support style brackets. These brackets can be set at any point along the back wall of your closet.
Where should closet rod brackets be placed?
As a rule, place the top rod 80 to 82-inches up from the floor and the bottom rod about 40-inches up from the floor. For a single rod application, plan 60-inches from the floor for placement. You will need at least 1-foot, 9-inches (24-inches is standard) away from the back wall for hanging.
How do you hang a rod without studs?
0:596:29Closet Rod Instalation with no Wall Studs - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe now need to drill a hole so our screw can easily go through the stringer and hit the drywallMoreWe now need to drill a hole so our screw can easily go through the stringer and hit the drywall anchor. So I'm going to drill a hole that is bigger than the screw.
How do you support a heavy closet rod?
Add brackets to each end of the wood closet rod. They will support the closet rod to withstand heavy weight without sagging. If you use a wood closet rod with brackets it can be long up to 96 inches. Adding a bracket to the middle of the wood closet rod will provide additional strength to the wood rod.
How far should closet rod be from shelf?
Leave wiggle room between closet rods and shelves. If this is the case, mount the closet rod below the shelf, achieving a distance of at least two inches from the bottom of the shelf to the top of the rod. Without this clearance, the space between the shelf and rod will be too tight to maneuver hangers.
How far apart should closet rod supports be?
Rod Height: the standard rod height for a single closet rod is 60 inches. When installing double rods, we recommend the top rod be hung 80 inches from the floor and the bottom rod 40 inches from the floor. We recommend spacing the rods 3 feet apart.
How do I keep my closet rod from falling down?
Unpack hanging closet storage racks and multiple garment hangers, and hang each item individually. This distributes the weight more evenly across the closet rod. Or at the very least, hang heavy storage rocks near the ends of the rod where it's less likely to sag.
How do I know where the studs are in my wall?
How to Find a Wall Stud Quickly and EasilyLocate the nearest light switch or power outlet. ... Look for dimples in the wall. ... Use windows as a guide. ... Tap the wall. ... Drill a hole. ... Fish around with a wire hanger. ... Try a stud finder app. ... Or just use a stud finder!
How do you hang something heavy on a wall without studs?
1:224:09How to Hang Heavy Items Without a Stud - YouTubeYouTubeStart of suggested clipEnd of suggested clipYour screw is already to hang a picture on. Next we're gonna get to a series of toggle bolts. So I'mMoreYour screw is already to hang a picture on. Next we're gonna get to a series of toggle bolts. So I'm going to use a pretty large drill bit to get this anchor through the drywall.
How much weight should a closet rod hold?
An average closet rod can hold 80 to 100lbs of weight. The exact load capacity depends on the material, wall thickness, and diameter.
How much weight can a standard closet shelf hold?
Typically, wire shelving maxes out at around 80 pounds. However, being made of steel, the tough, dependable EZ Shelf can hold up to 200 pounds (without securing to studs in 1/2” drywall) and the EZ Shelf heavy-duty garage shelving can handle even more—a whopping 250 pounds.
What is the strongest closet rod?
STORAGE MANIAC Whether updating an old closet or building a new one, the right closet hanger rod will maximize the space and keep your clothing and other items more organized. They can be made from stainless steel, steel, aluminum, wood or plastic. Steel is usually the strongest, followed by aluminum, a lighter metal.
How do you install shelf closet brackets?
0:352:45Simple Wood Shelf and Rod Installation Instructions - YouTubeYouTubeStart of suggested clipEnd of suggested clipSlide the rod flange over the rod secure. The rod to the support by pulling down then slide theMoreSlide the rod flange over the rod secure. The rod to the support by pulling down then slide the fixed rod flange to the wall and Mark the holes. Use a 1/4 inch drill bit to drill the hole. Push.
How much weight can a closet rod hold?
An average closet rod can hold 80 to 100lbs of weight. The exact load capacity depends on the material, wall thickness, and diameter.
How deep should closet shelves be?
The most desirable depth for any wood or laminate closet shelving is 14-inches. The reason for this centers around closet accessories. Tie racks, scarf organizers, built-in hampers, slide-out wire baskets, and various closet organizers of all sorts are all available to fit inside a standard 14-inch-deep closet section.
How far apart are closet shelves?
A clothes closet should have a minimum depth of at least 24 inches deep, so the clothes can clear the back wall. Shelves for women's shoes should be spaced about 6 to 7 inches apart. Shelves for folded clothes should be placed around 12 inches apart.
The Spacing Height for Mounting a Closet Rod | eHow
When installing a closet rod, height is one of the main things to consider. A closet rod must be high enough off the ground to allow ample room for clothing, coats or whatever will hang on the rod. However, it should be easily reached by everyone using the closet.
Why do closet rods collapse?
Omitting the cleat is the primary reason for collapse when closet rods are mounted to the ceiling. Your rods need to be able to support a lot of weight. A cleat will help with this. You'd be surprised at just how much clothes can weigh!
How much space do you need to hang clothes on a hanger?
Hold up your longest article of clothing on a hanger to determine where to place the rod. Don't forget to allow an additional four-inches for the drop between the rod and the ceiling. This extra space is needed to allow the placement and removal of hangers from the rod.
What is a rod bracket?
Rod brackets are specific to the type of rod that is being used. This has a lot to do with the shape of the rod selected. There are different brackets for round rods than there are for square or oval. The brackets also come in different colors to match the finish of the rod. These choices are all cosmetic.
How wide is a cleat?
By cleat, we mean a piece of wood approximately 3/4-inches high by 5-inches wide that spans the length of your ceiling where the rod will go. You can use a simple 2 x 4 instead in a pinch, but the wider, thinner material works better.
How tall is a knee wall?
These short walls are also sometimes called knee walls. We use 42-inches as our reference height because it is the suggested position for the lower part of a double hang closet section. It is also the shortest recommended height for adult clothing.
Can you use a cleat on drywall?
When you use a cleat, rod brackets can be screwed into this piece of wood rather than directly into the drywall. This way, you gain the strength of the studs or rafters to support the weight of your clothes. Cleat with a closet rod mounted to ceiling.
Can you build shelves behind a closet rod?
You can always build shelves behind the hanging area. That way, no space is wasted. This image illustrates proper spacing when installing a closet rod on the ceiling. Notice how the shirt is high enough so that it doesn't touch the floor. There is even additional room for slightly longer garments.
How to measure a closet rod?
Before you purchase your closet rod, you need to know how long it has to be. Every closet varies, so it's important to measure the width of your specific closet with a tape measure so you can purchase the correct length.
What happens if you cut a closet rod too short?
If you accidentally cut the rod too short, it will be useless and you will have to purchase another one.
How deep should a closet bar be?
However, you also need enough room behind the closet rod for the hangers to clear the back wall. In most cases, having the bar 10 inches (25 cm) off of the back wall works well.
What are the different types of closet bars?
There are a wide variety of closet bars available at most home improvement and hardware stores. In general, you can choose between metal and wood. You will also have the option of getting a solid bar or one that is adjustable.
How tall should a rod be?
In general, it's a good idea to mount a single rod at 5 feet (1.5 m) tall. A double rod set up should have the bottom rod mounted at 3.5 feet (1.1 m) and the upper rod mounted at 7 feet (2.1 m). If there is a shelf above the rod, you should make sure the rod is at least 2 inches (5.1 cm) below the shelf.
How to check for screws in studs?
You can also run a strong magnet along the wall to look for screws or nails that are in studs.
Do you need to add wood supports to a closet?
Add wood supports to the closet walls if needed. If the locations you have marked for the bar sockets do not have studs behind them in the wall, you will need to add supports to the wall. [11]