However, here are some general tips to help you get started:
- 1. Begin by planning the layout of your closet. ...
- 2. Once you have a plan, mark the studs in your closet wall with a pencil so you know where to drill the holes for the fasttrack screws.
- 3. Drill the holes and screw the fasttrack rails into the studs.
- 4. Hang your clothes on the fasttrack rails, and enjoy your newly organized closet!
How do you Mount FastTrack rails on the wall?
You mount the rails horizontally on your garage wall studs. You can mount FastTrack rails on 16″ or 24″ studs. The rail’s mounting holes are pre-drilled. The rail kit comes with all mounting hardware. Accessories lock onto the rail. After you get a couple of these rails on the wall, open the Rubbermaid toy chest of storage solutions.
How do I install Rubbermaid FastTrack hooks?
They attach to the Rubbermaid FastTrack rail. The beauty of this system is that you can easily move the hooks around without drills and screws. Just unlock, move, and lock again. Look at the images to see how this works. Snap the cover over the rail. After the rail and cover are installed into the wall, start adding in your hooks.
How do the FastTrack hooks work?
The FastTrack hooks have a C-shape that’s common to most other garage storage systems. The larger hooks also have a locking latch that clamps down on the rail to secure them in place.
How do I get Started with the FastTrack organization system?
The easiest way to get started with the FastTrack organization system is to get the tool hanging kit. Learn more about this option in the Editor’s Choice article below. The heart of the FastTrack Rail system is the FastTrack Rail. These rails range from 32″ to 84″ wide. They are a proprietary channel design.
How do you hang FastTrack shelves?
2:524:30Installing Rubbermaid® FastTrack™ Expandable Closet - YouTubeYouTubeStart of suggested clipEnd of suggested clipStarting at the top and working your way down insert. The brackets into your desired locations. TheMoreStarting at the top and working your way down insert. The brackets into your desired locations. The shelves are fully adjustable. And require no cutting to adjust the width overlap the shelves.
How high should I mount Rubbermaid FastTrack?
Figure out what height you want to install the rail and make a mark there. Rubbermaid recommends 4' or 7'3”, but I installed mine at 6' after experimenting with the tools I planned on hanging. Install the rack with one screw, check the level, and install the next.
What weight can Rubbermaid FastTrack hold?
1,750 lbsBesides having the versatility of being able to vertically or horizontally store pretty much anything you want, FastTrack also has two different rail lengths to accommodate different wall spaces – 48″ or 84″ (all images here are 84″ rails). Weight capacity for a rail is 1,750 lbs!
Can FastTrack rails be cut?
Can FastTrack rails be cut? Yes. Rubbermaid recommends not cutting them smaller than 32″, which will still let them attach to three wall studs.
How do you hang a Rubbermaid fast track?
1:062:27How to Install FastTrack Garage Organization System - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe track and drill holes you'll need a 1/8 inch drill bit for the stud holes you'll need a 3/8 forMoreThe track and drill holes you'll need a 1/8 inch drill bit for the stud holes you'll need a 3/8 for the wall anchors. Next push the anchors into the wall.
How do you install Rubbermaid FastTrack on a concrete wall?
0:000:51Concrete Rail Installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace your rail back up on the wall. And tap in freedom rail Universal anchors into each hole. UsingMorePlace your rail back up on the wall. And tap in freedom rail Universal anchors into each hole. Using a number 2 driver. Running your anchor screws until the anchors are fully engaged.
What is the best garage wall storage system?
Gladiator Steel Cabinet : Best Overall.HDX 5-Tier Shelving Unit : Best for Big Storage.Husky 26 in. ... Wall Control Pegboard Organizer System : Best for Maximizing Wall Space.Incly Heavy Duty Tool Storage Rack : Best for Holding Larger Tools.XCSource Drill Charging Station : Best for Organizing Battery-Powered Tools.More items...•
Is Rubbermaid FastTrack compatible with slatwall?
Rubbermaid makes a FastTrack Slat Wall System and a Fastrack Rail system. The accessories are NOT compatible with each other.
How do you attach a Rubbermaid shelf to a bracket?
14:2716:26How To Install Closet Shelves | Rubbermaid Fasttrack Closet KitYouTubeStart of suggested clipEnd of suggested clipDown. And now the shelf is secure. Then we'll take the little j hooks. Here. Put those into theMoreDown. And now the shelf is secure. Then we'll take the little j hooks. Here. Put those into the bracket. And then that's going to hold our clothing rod from the kit i'm using the two long sections.
What is the purpose of a hang track?
The hang track helps level the ShelfTrack system at the top of the wall so there's no need to level every standard separately. Just level the track once and each stand, bracket, and shelf automatically aligns for perfectly level shelving.
How do you cut metal to hang tracks?
0:121:09Cutting Hang Rail - YouTubeYouTubeStart of suggested clipEnd of suggested clipPosition the rail to face the wall and rotate 180 degrees with the top down place it over the rail.MorePosition the rail to face the wall and rotate 180 degrees with the top down place it over the rail. And Mark where it overlaps. Then cut off the excess.
How do you remove the Rubbermaid FastTrack rail cover?
The Rubbermaid FastTrack Garage 84 in. Hang Rail cover should be able to slide off the ends. If there is not room for sliding, you can use a flat head screw driver to lift the bottom of the rail all the way down the rail and it can be lifted to remove the cover.
How do you install Rubbermaid shelving brackets?
14:2716:26How To Install Closet Shelves | Rubbermaid Fasttrack Closet KitYouTubeStart of suggested clipEnd of suggested clipDown. And now the shelf is secure. Then we'll take the little j hooks. Here. Put those into theMoreDown. And now the shelf is secure. Then we'll take the little j hooks. Here. Put those into the bracket. And then that's going to hold our clothing rod from the kit i'm using the two long sections.
How do you secure Rubbermaid shelves?
0:326:14Installing Rubbermaid FastTrack Shelves - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe weight holds them in place you can put your piece of wood on there they recommend it 24 inchesMoreThe weight holds them in place you can put your piece of wood on there they recommend it 24 inches in between each upright you can screw in from underneath.
Is Rubbermaid FastTrack compatible with configurations?
The Rubbermaid Configurations closet system is not compatible with the FastTrack System.
What screws for Rubbermaid shelving?
FastTrack® is completely adjustable and works with all Rubbermaid® shelving types.Install rail at desired height using #12 x 2 ½" screws and drywall anchors provided (88" is standard height measured from top of rail). ... Hang uprights from the rail, spaced no more than 32" apart.More items...
Where Can I Find FastTrack Assembly Instructions?
For all of your assembly needs, visit the FastTrack Assembly Instructions page on the Rubbermaid website. Scroll down or search for “FastTrack garage” to find instructions on all current and discontinued FastTrack systems.
How many bikes can a 48 inch fasttrack hold?
Because the FastTrack is commonly used for bicycle storage, keep in mind that each 48 inch set can hold three bicycles while the 84 inch can hold up to eight comfortably. Use this as a benchmark when planning any other hanging equipment.
How Much Weight Can Rubbermaid FastTrack Accessories Hold?
Accessories have different weight capacities to consider when planning your storage. The rails themselves can hold up to 300 pounds when properly mounted but an overloaded hook can easily cause failure. Follow these weight guidelines for common FastTrack accessories:
What is a rubbermaid fasttrack?
The Rubbermaid FastTrack is a rail storage system that mounts on the wall, either horizontally or vertically, depending on the model. Horizontal rails are available in 48” or 84” sections for long runs along the wall. Its heavy-duty steel core is covered in a black PVC cover, providing durability and strength within an attractive cover.
How to organize garage storage?
Plan safe and effective storage accessories: Garages are often where we keep hazardous cleaners and materials, so planning closing/lockable cabinets should be a priority. Use bins and baskets for common smaller items that can be logically organized together. Having a few extra utility hooks on hand can make storage need adjustments easy to manage.
How much weight can a small bin hold?
25 pounds: This is the maximum weight capacity for small shelves, access bins, hose bins and multipurpose bins.
How to test a rail?
Test the rail: Give the rail a gentle pull to make sure it is mounted fast and strong against the wall. If there is any give, make sure the screws are drilled all the way in and not stripping out of the wall .
What is a fasttrack hook?
The FastTrack hooks have a C-shape that’s common to most other garage storage systems. The larger hooks also have a locking latch that clamps down on the rail to secure them in place.
How Much Weight Can Rubbermaid FastTrack Hold?
I see one question pop up on forums and reviews any time the FastTrack system is mentioned:
How to reposition rubbermaid hook?
If you want to re-position a Rubbermaid hook, you’ll need to lift the hook off the rail and re-attach it in the new location.
What is the rubbermaid fasttrack?
The FastTrack Rail. One of the things I really like about the Rubbermaid FastTrack system is the black plastic cover that slides over the metal rail. While everyone else uses heavy plastic on their track storage system, Rubbermaid went in a different direction. The only plastic you’ll find is the cover on top.
Why do Kobalt hooks stay in place?
The Kobalt track is made of a rubberized plastic, so the hooks stay in place largely due to the friction of the track on the hook. All of the other manufacturers rely on the friction of the hook, or some other locking mechanism, on the track.
How many feet is a 15 piece starter?
15-Piece FastTrack Starter Kit. The 15-Piece Starter Kit is special because it has three four foot FastTrack rails instead of the shorter rails you’ll see in other starter kits. If you’ve already got a FastTrack setup in your home, this is probably a great fit for you.
Is Rubbermaid Fasttrack easy to install?
The Rubbermaid FastTrack rails are easy to install, but there’s a little more to it than you might think.
What is a fasttrack hook?
The FastTrack Compact Hook is a shorter double storage hook. It holds its cargo close to the wall.
How long does it take to install a fasttrack rail?
The FastTrack rails are easy enough to install. One person with a drill should be able to install the rail in a few minutes.
What is a 2 hook S hook?
The 2-Handle S-Hook is really two hooks that latch onto the Rubbermaid FastTrack Rail system.
How long is the rubbermaid ladder hook?
The Rubbermaid FastTrack Ladder Hook offers a deep resting area to hang your ladder. The ladder rests on a 13 in. long area.
What is a rubbermaid fast track hose hook?
The Rubbermaid FastTrack Hose Hook has a really tall end lip to keep the hose from slipping off.
How many hooks does a fasttrack bike have?
FastTrack offers both a vertical and a horizontal bike hook. You only need one horizontal bike hook to carry a bike frame. Both hooks carry 50 lb.
What is a fasttrack rail access bin?
The FastTrack Rail Access Bin is an open-topped storage box. The front opens like a mailbox door.
Quick Installation, Durable Storage
Quickly set up durable, safe storage for garage items of all sizes using this rail-and-hook system.
Easily Attach Accessories
Customize with easy-to-attach accessories: shelves, bins, cabinets, racks, large and small hooks, and more.
Maximize Storage
Use anywhere to maximize vertical space and reduce floor clutter; hang over a work area for easy access.
How to order a FasTrak toll tag?
You can order a FasTrak toll tag through US mail by printing and mailing in a FasTrak application form. The FasTrak account application form has all of the instructions you need to complete this process. Download mail order form. Once FasTrak receives your application, a web account will be created for you.
Is FasTrak a toll pay system?
Enjoy convenient, fast and cost-effective travel on Bay Area bridges, express lanes and SFO parking facilities with FasTrak’s easy-to-use electronic toll pay system. The information below will guide you through the process of ordering a new toll tag (also known as a “transponder”), registering a toll tag you already have and opening a web account to manage your FasTrak activity.
Does Costco have toll tags?
Some Costco and Walgreens locations have toll tags available for pick-up and immediate use. If you pick up a toll tag at a retail store, you must register it online and create an account through our web account set-up process.