Step 1– Prepare for Installation
- Make sure you have enough people to install your board. ...
- Place the Glass Whiteboard (Part A) against the wall in the desired installation location.
- Place a level on top of the board to confirm it is level.
- Use a pencil to mark an “x” in each mounting hole.
- Pro Tip - Only use a pencil when marking the holes. ...
How to mount the whiteboard on the wall?
- Measure the width and length of your whiteboard. ...
- Divide the board length by the number of studs in the wall you’re hanging it on.
- Find studs in the wall you’re mounting the whiteboard to using a stud finder.
- Place the stud finder along the wall until it beeps. ...
- Measure between studs, too, so you know where to drill in the wall.
How to create an awesome whiteboard wall?
- Sand paper of various grits
- A power sander (not 100% required, but really helps)
- Paintbrushes
- High density paint roller for a smooth finish
- Paint thinner for cleanup
- Magnetic primer
- Dry-erase paint
- Masking tape
- Spackle
- White latex primer (or other interior paint)
How to hang a wakeboard on the wall?
Method 3 of 3: Using a Rope to Store a Skateboard on a Wall Download Article
- Cut a 25 in (64 cm) piece of thick rope. Get a strong, durable rope that won't break over time under the weight of your skateboard.
- Tie a knot on each end of the rope and burn them. Tie a simple knot each end of your piece of rope and pull the ends tight.
- Mark where you want to hang the skateboard on your wall. ...
How to hang a cork board on a wall?
The best way to use string to hang a cork board is to:
- Attach two D-rings to the rear of the cork board.
- Tie a string between the two D-rings.
- Mark the wall at the point where the cork board should hang.
- Pre-drill a pilot hole at the marked point.
- Gently hammer a wall anchor into the pilot hole.
How do you mount a whiteboard without drilling?
Adhesive Strips Command Strips are the best way to hang a bulletin board without drilling holes in your wall. However, they have their limitations. Even heavy-duty adhesive strips can only hold a dry erase board that weighs up to 16 pounds. If you have a larger board, use a different method of hanging it.
How do you attach a whiteboard to the wall?
1:342:40Luxor WB Series Whiteboard Mounting Instructions - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure to install the brackets at the top at their highest. Position you'll later tap these downMoreMake sure to install the brackets at the top at their highest. Position you'll later tap these down using a hammer. Place the whiteboard on the lower brackets. Making sure to Center it with the middle
How do you hang a whiteboard without a frame?
0:541:52How to hang a magnetic whiteboard without hanging brackets - YouTubeYouTubeStart of suggested clipEnd of suggested clipThat you can just set the magnetic white board on them as long as they're level. And it holds itMoreThat you can just set the magnetic white board on them as long as they're level. And it holds it nicely on the wall.
Does dry erase work on glass?
Window glass is an ideal surface on which to use dry erase markers. It is very non-porous and you don't want anything with pores that the ink can sink into.
How do you put a whiteboard on the wall without nails?
If you want to hang a whiteboard without nails, make sure you find a super sticky product. Generally, you'll want to use industrial strength velcro or Command strips to do this, as they hold weight pretty well.
How do you hang a board without nails?
1:163:44How to stick a soft board to a wall without nails | DIY | Tutorial ThursdayYouTubeStart of suggested clipEnd of suggested clipSo what I'm going to do is just staple four corners of it and then you take some double-sided foamMoreSo what I'm going to do is just staple four corners of it and then you take some double-sided foam tape you break off the tape or into accoring pieces.
How do you hang a whiteboard panel?
Peel the backing off the mounting tape and put your panel in the correct place. Put in your first screw then press the board flat across to the next screw to make sure that the board is as stretched and flat as you can get it to minimize jiggle when writing. This is the same as if you were putting up paper on the wall.
Can any glass be a whiteboard?
It turns out that you can use glass as a dry erase board. Dry erase markers don't stain glass since it is not porous, which makes it a perfect canvas.
What marker is best for glass?
Best Markers for Glass.Best markers for glass:01) Sharpie Oil-Based Paint Markers.02) Arteza Dry Erase Markers for Glass Boards.03) The Rainbow, Glass Liquid Paint Markers.04) Shuttle Art Permanent Markers.05) Emooqi Permanent Paint Pens.06) Crayola Washable Window Crayons.07) GAINWELL Washable Wine Glass Markers.More items...•
What kind of marker can I use on glass?
Choosing a Writing Utensil or Ink. Use a dry erase marker to make temporary marks on glass. Dry erase markers work well on glass surfaces. The markings can be easily wiped off, too, so if you mess up this shouldn't be a problem!
Can I turn a wall into a whiteboard?
To make a whiteboard wall, you'll simply apply several generous coats of dry erase paint to your wall and let cure for 5 days. I always recommend freshening up the coat of paint already on your wall for the best results, but you can also apply this technique over wallpaper for an exciting visual twist.
How do you install a whiteboard?
0:001:35How Install the Microsoft Whiteboard App - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll righty one of the first things you're going to want to do with your new Lenovo ThinkPad x3 90MoreAll righty one of the first things you're going to want to do with your new Lenovo ThinkPad x3 90 yoga is to be able to install the whiteboard space so to do that come all the way down to the bottom
How to determine where to hang a whiteboard?
Before you determine where to hang your whiteboard, measure its width.This will help you determine where to place the screws so they will effectively screw into the studs. If you have three studs, be sure to divide your measurements into threes. If you have two, divide into two, and so forth.
How to make a whiteboard with studs?
Drill a hole through the top and bottom of your whiteboard. Drill a hole into the top and bottom of your whiteboard, measuring the area to align with your studs. This is particularly crucial if your whiteboard has a metal frame, rather than a wooden one, as metal will not allow a screw to be drilled directly into it.
How much does a whiteboard weigh?
Weigh your whiteboard. Adhesive patches are intended for use on smaller objects. If your whiteboard weighs more than 3-4 pounds, an adhesive may not be strong enough to use. If it is under 3-4 pounds, you can hang it without risking damage to your wall.
How to make sure your board is stable?
To make sure your board has an adequate amount of support, place an adhesive strip every 6-8 inches on your board. If your board is large, also place a strip midway down the height of your board. If your board is small, place an adhesive strip in all four corners to ensure stability. Remove the backs of the patches.
How to use stud finger on whiteboard?
To use a stud finger, place the finder flush against the wall, press the button, and slide it along the wall until you hear a “beep” indicating that a stud was located . Measure the area between the studs, as well, to help you determine where to drill. Drill a hole through the top and bottom of your whiteboard.
Is a whiteboard a good tool?
This article has been viewed 178,287 times. Whiteboards are an excellent tool, whether you are writing your meal plan for the week, or preparing a lesson plan for your Kindergarten classroom.
Installing Your Infinity Glass Whiteboard
We know you’re excited to start using your Quartet Infinity Glass Dry-Erase Board! To help you get started, we’ve provided detailed instructions for mounting your glass whiteboard. Please note that instructions may vary depending on the size of your board, but all Infinity boards will follow the same basic steps.
Step 1– Prepare for Installation
Make sure you have enough people to install your board. We recommend 2 people for smaller boards and 3+ people for 72" x 48" and 96" x 48" boards.
Step 6-7 – Install Standoffs
Place a Standoff (Part G) over each drywall anchor. Insert a Phillips Head Screw (Part E) through the standoff, into the anchor and tighten.
Step 8 – Install Glass Board
Place Washers (Part D) on the threaded section of each metal Standoff Cap (Part C). Lift glass whiteboard and align holes with the Standoffs (Part G) on your wall.
Step 9 – Attach Accessory Tray
Starting at an angle, press the Accessories Tray (Part B) up along the bottom of the glass whiteboard.
Ready to Write!
You’re now ready to start using your glass marker board! Keep your thoughts organized and ideas flowing on the beautifully designed, frameless glass surface. Our Infinity boards are easy to erase, while our dry-erase markers help you create bold writing. If you have a magnetic glass board, hang up reference documents and reminders for easy viewing.
Have More Questions?
If you have further questions, please feel free to contact us. You can also download a copy of your manual and visit our Quartet Infinity Glass Dry-Erase Boards page for more information on the Infinity line.
Hang with whiteboard hooks
Safety hooks are a simple option for small to midsized whiteboards with built-in hangers. If you live somewhere with lots of shaking ground (such as places where earthquakes are common), this is a great option, too.
Hang with industrial-strength adhesive hooks
If your office space has flat surfaces, but you can’t use wall hooks, consider adhesive hooks. Many rented offices restrict whether you can hang things on the wall. Here’s how to mount a whiteboard using adhesive hooks.
Hang with screws
Screws are great for whiteboards of larger sizes and more permanent fixtures. If you want to know how to mount a whiteboard permanently, you need to know how to use screws. Read on for a step-by-step guide.
