Method 1 Using Adhesive Hooks Download Article
- Purchase adhesive hooks that can hold the weight of your curtains. ...
- Cut a right angle out of a piece of cardboard. Draw a square at least 2 in (5.1 cm) wide in the corner of the piece of cardboard.
- Align the cardboard with the window corner and mark the bottom of a hook on it. ...
- Push a pencil through the mark on the cardboard to mark the wall. ...
Full Answer
How do you hang a curtain rod on a wall?
To hang curtains, start by determining your window's height and marking the wall where you'd like the curtain rod brackets to be installed with a pencil. Make sure your measurements are level with each other, then drill holes into the marked spots, install the wall anchors, and screw in the brackets.
How to make holes in curtains for curtain rings?
Follow the easy steps below to make holes in your drapes for the curtain rings. While sewing your curtains, stitch curtain tape in between the outer drape and the lining drape at the top part of your curtains. The curtain tape will eventually be used to accommodate the eyelets and keep the material stiffer.
Is there a way to hang curtains without damaging walls?
Problem is none of the windows are trimmed out and the only solution I knew to hang curtains without damaging the wall were these that required trim and they simply don’t work and even these require nail holes (albeit hidden holes) I saw some temporary curtain solutions with command strips but wasn’t impressed with the look.
How should I Hang my drapes?
– The curtain length is another important factor. Ideally, you’ll want your drapes to slightly reach the floor. Hanging them from rod pockets or tabs will raise the upper part of the fabric. In this case, hang your drapes with clips just below the rod.
How do you hang curtains with large grommets?
0:001:10How To Hang Grommet Curtains & Panels - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou'll need a metal rod that matches the grommets on your drape and the diameter. You want is a oneMoreYou'll need a metal rod that matches the grommets on your drape and the diameter. You want is a one in three eighths or a one and a half inch.
How do you hang curtains with holes?
0:143:21How to Install Window Drapes Video - Grommet Drapery Panels - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd place a small mark at the top of your tape. Align the top of your bracket on your pencil mark.MoreAnd place a small mark at the top of your tape. Align the top of your bracket on your pencil mark. And then make two guide marks through the bracket holes with pencil.
How do you hang curtains with eyelets?
0:301:34How to Hang Eyelet Curtains - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe outermost eyelet goes outside the bracket. Between the bracket and finial this will stop yourMoreThe outermost eyelet goes outside the bracket. Between the bracket and finial this will stop your curtains from sliding all the way across your window. Finally check that your curtains close neatly.
How do I make eyelet curtains hang evenly?
0:532:16How to Create Fixed Grommet Spacing - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou could use a cord. You can make a small banding out of the face fabric or the lining fabric.MoreYou could use a cord. You can make a small banding out of the face fabric or the lining fabric.
What kind of rod do you use for grommet curtains?
2:183:57Best Curtain Rod for Grommet Curtains - YouTubeYouTubeStart of suggested clipEnd of suggested clipLong lasting and strong enough that can withstand the heavy curtains up to 15 pounds. At number fourMoreLong lasting and strong enough that can withstand the heavy curtains up to 15 pounds. At number four deca politan endcap curtain rod the rich finial.
How do eyelet curtain rings work?
But you may be wondering how exactly drapery rings work. It's actually quite simple. You just hang them from a metal pin that's in the back of the drapery. Some drapery rings also have built-in clips, allowing you to hang the drapes without needing to insert pins into the fabric.
Do you have tie backs with eyelet curtains?
Tie backs aren't usually needed on eyelet curtains, since they naturally stay in position when drawn. You might still choose to use them however, simply because you like the way they look.
How do you hang curtains with rings and hooks?
0:052:583 Ways to Hang Curtains With Clip Rings by Country Curtains - YouTubeYouTubeStart of suggested clipEnd of suggested clipLook number one how to clip rings to a panel lay panel on a flat surface with the top or header.MoreLook number one how to clip rings to a panel lay panel on a flat surface with the top or header. Towards you place the clip on each end of the panels header fold panel in half lengthwise.
How do you hang eyelet blackout curtains?
1:028:01The Simplest Way to Hang Your Blackout Curtains - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou're gonna need mounting brackets with set screws these are what's gonna hold the curtain rod inMoreYou're gonna need mounting brackets with set screws these are what's gonna hold the curtain rod in place. And you can be able to tighten those screws.
Why are grommet curtains so popular?
Grommet drapery panels have been a popular choice for draperies for years because they offer a modern, sleek look. Grommets come in a variety of sizes and colors so they are easily worked into any decor.
Should eyelet curtains touch the floor?
All it needs is to let the curtain hem reach about 3/8 to ½ inches above the floor. Besides being easy to measure and design, it is also easiest to vacuum and maintain. If you are looking for curtains that don't require too much maintenance, this can be an excellent option for you.
How do you make grommet curtains look expensive?
0:496:37How to make store bought curtains look EXPENSIVE - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo look closely and I'm gonna show you how to put these rings on and the way I place my rings. TheyMoreSo look closely and I'm gonna show you how to put these rings on and the way I place my rings. They will be easily spaced. So this is a quick tip it.
How do you hang grommet curtains without a rod?
Five Creative Ways to Hang Curtains Without RodsUpholstery tacks.Tension cables.Hook-eye screws and drapery pins.Staples and furring strips.Cabinet knobs.
What are the different ways to hang curtains?
There are two ways you can hang your curtains; on a track or on a rod / pole.Curtain track. A curtain track is an unobtrusive and elegant way to hang curtains, as you don't see the track at all. ... Curtain pole. ... Rod Pocket. ... Curtain rings. ... Eyelet. ... Tab Top. ... Tie Top. ... Pencil pleat.More items...•
Is there a way to hang curtains without drilling holes?
Sticky Command Hooks work well as coat hangers and for hanging pictures, but the brand also makes hooks specifically for curtains. They have a slimmer, more rounded bottom hook that fits most curtain rods or wooden dowels, no drilling required.
How do you hang curtains without putting holes in the wall?
To hang curtains using a damage-free installation method, try one of these options:Secure the hardware with adhesive hooks. Adhesive hooks or adhesive strips are versatile hanging tools you can purchase in various sizes and strengths. ... Use magnetic curtain rods. ... Use tension rod curtains inside window frames.
What is the best way to hang drapes?
Curtain rings are another popular choice for hanging drapes. Using small hooks, you can attach your curtains to those rings before slipping them onto the rod. Curtain rings are a durable and practical solution as they allow the drapes to be easily removed and replaced.
What is the best way to make a curtain panel look tailored?
4. Hanging Pins. Hanging pins are a super elegant way of creating a tailored look thanks to the plastic thread that creates loops on the curtain panel’s back. With a hanging pin , you can loop it through the plastic thread before attaching onto the ring.
What is hidden tab drapery?
Hidden tab panels are a simple way to hang your curtains as they provide a pleated look. Hidden tabs feature a series of flat loops or tabs that are sewn along the back of the curtain panel over the pole. These hidden tabs make the drapery look as though it is floating on the pole.
How to hang curtains with pencil pleats?
The neat and consistent folds resemble the size of a pencil, hence the name. You can hang your curtains using drapery pins attached to the back of the drape where the pins are out of sight. They can then be hooked onto a pole system.
Why are there hidden tabs on curtains?
This is because the curtain’s fabric touches the rod directly, thus making it more difficult to move. 2. Rod Pockets.
What is pinch pleat?
Pinch pleats are a series of 3 pleats that sit at the top of the drape. These pleats are kept together by means of fan-shaped stitches. If you want a simple style of hanging your curtains, the pinch pleat is a versatile option as it can be hung on either poles or tracks. 10. Gathered Pleat.
What is a tie top panel?
Tie-Top Panels. When ribbons are tied to the top of the curtain poles and form small bows, they are referred to as tie-top panels. This very informal and rustic style of hanging curtains works well with lightweight fabrics. Tie-top panels look romantic and can be directly tied to the curtain pole or rod.
Can you slide on brackets on mini blinds?
These Slide on Brackets area mainly for mini blinds, but I think the adhesive may cause damage to the wall when you want to remove (and you also have to level and measure)
Is a rod included in a curtain?
Umm the rod is not included. Which leads me to my next caveat. This is NOT a cheap option for hanging curtains especially since you have to buy your own rod. But OMG the headache it saved me was worth it.
Do blinds slide down with no bracket?
If your blinds have valances you will need to remove those. The No-No Bracket also includes two 3M strips to keep the bracket from sliding. Listen, please use those if you’re going to open and close your blinds. If not—they will slide and the whole thing will come down.
Can I hang curtains without damaging the wall?
The downside to hanging these curtains without damaging the wall was I couldn’t hang them high. I managed to hang them wide by placing the brackets on the edge of the window and allowing the rod to stick out further, but you are stuck having to hang them directly on top of the window. If I had my way, these would be hung a few inches from the ceiling to elongate the room.
Can you hang navy blue curtains wide?
At least you can hang them wide as to not eliminate any light from the room. As a matter of fact, the navy blue drapes are these blackout curtains, but I hung them so they cover only the edge of the window. I get to keep all my Florida Sunshine.
Can you hang curtains without holes?
If you love the look of drapes and live in a rental apartment or home, you’re probably looking for a solution to hang curtains without making holes in your walls. I’ve found several ways to hang curtains without any drilling, screws, nails, and even over blinds that stick out from the wall. Bonus—with my method you can still hang them wide allowing all the beautiful natural light to shine through.
How to make curtains stiffer?
Step 1 - Sew Up Curtain Tape. While sewing your curtains, stitch curtain tape in between the outer drape and the lining drape at the top part of your curtains. The curtain tape will eventually be used to accommodate the eyelets and keep the material stiffer.
How to draw circles on curtains?
It is best to draw circles by placing an eyelet on each spot. To ensure that the holes are evenly spaced, measure the width of the curtain and calculate how many rings you should fix so as to have the curtains hanging nicely. You need to make sure to make just the right amount of holes.
Why do curtains sag?
Too few holes will cause the curtains to sag as they will not be hung properly and they will appear rather unsightly. On the other hand, you do not need to make too many holes as they may appear too cluttered, and it will take a longer time and more effort for nothing.
What is the purpose of articles being reviewed?
To ensure our content is always up-to-date with current information, best practices, and professional advice, articles are routinely reviewed by industry experts with years of hands-on experience.
Can you make curtains with curtains rings?
It can be fun and cost-efficient to make your own curtains, from choosing the fabric, designing and sewing them, and ultimately making holes for the curtain rings to hang them. In their simplicity, curtain rings carry out the most fundamental task: hanging the curtains over the window. Follow the easy steps below to make holes in your drapes for the curtain rings.
Can you put rings in a curtain rod?
Now you can slide the rings into the curtain rod so as to hang your curtains and enjoy your finished project. Although the whole process may take time and effort, the final result is more personalized and definitely much cheaper. Curtains/shades/blinds.
Can you put a curtain ring in a hole?
Once the eyelets have been fixed in place you can insert a curtain ring into each hole. There are various types of curtain rings available. Some are simple rings whereas others come in more oval designs and sometimes are slightly engraved or patterned. It is best to choose curtain rings that match with the curtain rod, both in material and in color.
Step 1: Supplies
Supplies List: Pressure Treated Beveled Post Cap (Home Depot SKU#429429) Lumber section, Decking Wall Door Stop (Lowes) Door Hardware section Primer Paint or Spray paint (especially for rubber) Super strong glue like Gorilla Glue or Liquid Nails 3M Command Strips Spring Tension Rod Drapes Note: Probably can also use Rossette Blocks and Rubber cups used for the bottom of furniture as subtitutes but haven't tried it..
Step 2: Assemble and Paint Rod Holders
Prime the post cap then glue the door stop on it. Paint with desired color. Apply 3M Command strips at the back.
Step 3: Placing the Rod Holders Unto Wall
Followed the 3M directions and placed the holders into position. Waited at least an hour before putting up the spring tension rod and drapes. The spring tension rod fit perfectly into the wall door stop. The combination of the spring in the rod and the door stop fitting probably helped stabilize the window drapery even further.