How to Install Outside Mount Blinds with Window Trim
- Measuring and Determining the Mount. It is very important as the basic information before buying the blind. ...
- Attaching the Brackets. Place the bracket on the pencil mark that has been already made. ...
- Installing the Head Rail and Valance. Attach the head rail to the valance by using valance clips. ...
How to Mount blinds on the outside of a window?
Instructions
- Choose a Blind Style. An outside-mount blind is a good choice if your window opening is not recessed within the jambs, or if the opening is out of square, as ...
- Measure Width. Measure the width of the window open and case moldings to determine how wide you want the blinds. ...
- Measure Height. ...
- Order Blinds. ...
How should blinds fit a window?
Measuring for Outside-Mounted Blinds
- Start by measuring the width of the left-to-right space you would like the window treatment to cover. You’re not measuring the width of the window itself necessary. ...
- To measure the length, you must first determine where you’d like to position the headrail. ...
- You don’t need to take a depth measurement for outside-mounted blinds.
How much does it cost to install blinds?
They not only add privacy and decorative appeal, but also help insulate windows, resulting in higher home energy efficiency. The average cost to install window blinds ranges from $300 to $1,000, with the average homeowner spending around $700 to install faux wood vertical blinds on 8 windows of 24 x 36-inches.
How to hang three curtains on one window?
How to properly hang curtains
- Take all your window measurements (scroll up if you missed that section!)
- Using a drill or screwdriver, hang the first bracket with screws. Use anchors if your rod and curtains are heavy.
- Add the rod and position the second bracket – before you screw it in, use a level on the rod to ensure it’s straight. ...
Can you put blinds on the outside of the window?
An outside mount (installing the blinds on the wall or trim above the window) is usually just recommended when windows are too shallow to mount inside or when there are obstructions like a window crank.
Can blinds be hung outside window frame?
Outside-mountedblinds or shades are mounted on the wall outside the window frame, on the window trim or even on the ceiling above the window. Outside mounted window coverings may be right for your home if: You want to block more light. Outside mounts cover the entire window.
How do you put blinds on a window casing?
0:502:50How to Install Window Blinds | HGTV - YouTubeYouTubeStart of suggested clipEnd of suggested clipWindow blinds are attached to the window casing or wall using a few brackets generally the blindsMoreWindow blinds are attached to the window casing or wall using a few brackets generally the blinds will slide into the brackets. Once the brackets are attached. Make sure that your entire blinds.
How do you fit blinds outside Mount?
1:042:51How to Install Outside Mount Blinds - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith no trim place your blinds up against your window making sure they are centered. And level markMoreWith no trim place your blinds up against your window making sure they are centered. And level mark the outside and bottom of the brackets.
Is it better to put blinds inside or outside?
Outside Mounted Blinds & Shades Block Out More Light and Provide Full Coverage. Since outside mounted blinds and shades cover more of the window and frame than inside mount blinds, they provide more light coverage.
Can you mount blinds on the window frame?
Any window in a shallow frame is a good candidate for an outside mount. The brackets for the outside mount blinds and shades can be installed on the window frame, on the wall outside of the window frame, or on the ceiling, above the window frame.
What is an outside mount?
An outside mount covers the entire outside of the window frame and can fit either closely to the outside window frame or you can choose to extend the perimeter of the window because you want to add the illusion of a bigger window or more space or height.
How do you hang blinds without brackets?
Place the head rail over the top window trim and center it over the window. Place a bubble level on top of the head rail and position the blind so it remains level on the top window trim. Mark the holes you drilled onto the head rail by placing a screw into each hole then pressing the screws into the wood.
Do you need anchors for window blinds?
If your window frame is drywall rather than wood, or if your window frame doesn't have wood behind the drywall, you should use drywall anchors. There is a “hammer in” style (pictured below) that might be included with your mounting hardware, or you can find a “screw in” style at the hardware store.
How do you install an outside mount?
0:282:10How to Install Outside Mount Wood and Faux Wood Blinds - YouTubeYouTubeStart of suggested clipEnd of suggested clipBy pressing up on the bottom of your bracket with your thumbs. While learning the front part of theMoreBy pressing up on the bottom of your bracket with your thumbs. While learning the front part of the bracket until the cover snaps into place to complete your installation attach.
How do you hang roller blinds outside Mount?
0:361:31How to Install Outside Mount Roller Shades - YouTubeYouTubeStart of suggested clipEnd of suggested clipNext install the side of the shade with the retractable pin at first then connect the other side ofMoreNext install the side of the shade with the retractable pin at first then connect the other side of the shade into the other bracket. To complete your installation install.
How do you install vinyl blinds outside Mount?
0:031:08Installing Outside Mount Mini Blinds - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd using an upward motion rotate the head rail into the bracket until it snaps into place thenMoreAnd using an upward motion rotate the head rail into the bracket until it snaps into place then install the wand. If desired secure the bottom of the blinds with the included hold down brackets.
What is the difference between inside and outside mount blinds?
As opposed to inside mount when the coverings are mounted inside the window frame, outside mount is mounted on the wall above the window and directly on the trim. Because of this the blinds or shades will need to be wider than your window opening.
Can you mount blinds to vinyl window frame?
Vinyl Windows & Blinds Yes, it is possible – blinds can be installed without damaging your vinyl window frames.
Can you hang Roman shades outside window?
Roman shades can be installed both inside and outside the window frame depending upon your need and the depth of your windows. Structurally we believe that soft fold and dog-ear Roman shade would make a better fit as outside mount than the inside mount.
Where should you mount blinds?
You can either mount your blinds inside or outside of the casing. Hanging the blinds outside means your window look bigger but when you hang your blinds inside, your window looks slimmer. When you need to mount your blinds outside, measure along the outside edges of the casing that surrounds the window.
How to mark holes in blinds?
Hold the bracket in place to mark the holes. An inch or so from the edge is usually a safe spot for an inside mount, as shown, but look at your blinds and make sure the bracket won’t interfere with the internal mechanisms of the blind. If your blind came with a template for the bracket holes, use that to mark them.
What are mini blinds made of?
Make good choices. Most mini blinds are made of vinyl or aluminum. Wood and faux wood blinds are available at a higher cost. Also, blinds come either with a cord (for lowering and raising the slats) or without a cord (slats are raised and lowered by moving the bottom rail up or down.)
Why do you need an outside mount window?
One compelling reason to go with outside mount is if the window frame is too shallow to accommodate the mounting brackets. If your window trim has holes from someone else’s window hardware, here’s how to fill those holes quickly and easily.
How to measure for blinds inside mount?
If you’ve chosen to inside-mount your blinds, measure the width of the window space. Select a blind with a width that will fit inside the space. Don’t go too narrow or you’ll have gaps that reduce privacy and let in too much light. For outside mount, measure the width you’d like to cover up and select a blind with that width.
Can you keep the bottom rail on the blinds?
Once installed, you can keep the bottom rail hooked on the brackets so the blinds won’t flap around when the window is open on a breezy day. Wind can also wreak havoc on your screen door. Repair a screen door easily with these simple steps.
Can you install screws with a drill?
If you don’t have a drill/driver, the screws can be installed with a screwdriver, but it takes longer and it may be very difficult, if not impossible, to install them with a screwdriver if the window frame is made of hardwood or metal.
Can you custom cut blinds?
Most blinds come in standard widths to fit common window sizes. Some blinds can be custom-cut where you purchase them or, if you’re not in a big hurry and you don’t mind spending more, blinds can be custom-ordered to fit your dimensions.
What is a valance clip?
Valance clips are used to attach the head rail to the valance. The valance is what covers the head rail and makes it look a bit more decorative. The valance clips should be snapped over the front lip of the head rail before the head rail is inserted into the bracket. Your blinds may be made up of ‘ladders’ of blinds.
How do I install a soffit track?
Is it going inside of a soffit? Anyway, usually there is a track, and it snaps into the brackets. Install the brackets and use a central point for all brackets. (3brackets per 6’+ of track) let’s say your first bracket will be 2 inches away from the window, install your next two brackets 2 inches away from the window. Hold the track with both hands put the back side in first and then clip the front end. I find securing the right side first and then the left side next is the easiest way. Then just clip in the vertical vanes and you are good to go.
How many screws are in a wood bracket?
Each bracket comes with two screws. If you are drilling into wood, use a 1/16-inch diameter drill bit to make a hole that is slightly smaller than the screw that you will use to secure your bracket. Replace the bracket and drill your screws into place.
Why hang blinds on the inside?
Hanging the blinds on the inside gives your window a slimmer look. Inside mounts also allow more light to shine around the edges of the blinds. Measuring for an outside mount: Measure along the outside edges of the casing that surrounds the window.
How to make a head rail sound?
Place the head rail into the brackets. Once you have finished drilling the brackets into place, make sure the bracket doors are wide open and then insert the head rail into the brackets. When you have situated the head rail, snap the bracket doors closed. You should hear an audible snapping noise. 3.
How thick are faux blinds?
Faux blinds are great! They're about 2 in (5.08 cm) thick and are a lot more stylish-looking than aluminum blinds.
What do you use to drill into drywall?
If you are drilling into drywall, plaster, concrete, tile, stone, or brick, use appropriate screws, anchors, or plugs and follow the specific instructions that come with them.
Why is it important to measure the outside of a window?
The outside is important too because it should fit the outside mount blinds. Outside mount blinds make the window and blind look larger. For measuring the outside mount, measure all the casing around the window and then measure it from the top to the bottom.
What is a valance clip?
The valance itself is the cover of the head rail and something that makes it more decorative. Moreover, the valance clips must be snapped over the front of the head rail before it is inserted to the bracket. 2. Put the head rail to the brackets.
How to level a blind?
Hold the blind up so the top part of the blind will be centered and leveled with the casing of the window. Mark below the head rail by using pencil on both side of the casing. Put the mark ¼ of an inch on the end of each head rail.
What is an outside mount blind?
Outside mount blind is a good option if your windows are out of square or the window opening has no break. Outside mount blind is able to be adjusted for irregular sizes. However, determine first how wide the blind to be so it has enough space for the mounting brackets.
Where to place brackets on window?
Place the bracket on the pencil mark that has been already made. There are two spots for bracket, the one towards you and the other towards the window center.
What Are Valances? Do I Need One?
Often when ordering outside mount you'll want to select a valance. A valance is a small covering that hides installation hardware and operational components. On an outside mount, the valance wraps around to the sides of the blind's or shade's headrail for a finished look. The pieces that wrap around the sides are called side returns.
What Do Outside Mount Blinds Really Look Like?
The biggest differences you'll notice between inside and outside mount blinds or shades is the valance. Valance styles will vary depending on the product type and brand.
How Do You Measure For Outside Mount?
Measuring details may vary depending on the exact type of window treatment you choose. You can check out our measuring guides for each type of window treatments for more detailed instructions.
How Do You Install An Outside Mount Blind Or Shade?
Installation for outside mounts are super easy and just as simple as install for inside mounts. Often, blinds and shades will use the same bracket type for inside and outside mount (known as a universal bracket). You'll just need to use different holes in the bracket or rotate the bracket in a different direction.
What is a valance on a roller shade?
This is just an integrated valance system, like a box that houses the roll, brackets and end mechanisms. It gives roller shades a sleeker, more finished look.
What is the difference between an outside mount and an inside mount blind?
With an inside mount, blinds can have harsh light gaps on each side limits any blackout effect. With an outside mount, you typically order several inches wider and taller than the window for full coverage.
What is an outside mount window?
Outside mount (sometimes referred to as outside brackets) means that a blind or shade is installed outside of the window frame while an inside mount is installed inside the window opening. Inside mount blinds are often flush with the window's opening and do not cover up the trim. Outside mount window treatments can be mounted on the face ...
Should I Install My Blinds as Inside Mount or Outside Mount?
As long as your window frame has enough depth to mount blinds inside the opening, we almost always recommend an inside mount. An outside mount (installing the blinds on the wall or trim above the window) is usually just recommended when windows are too shallow to mount inside or when there are obstructions like a window crank.
What is an Inside Mount?
An inside mount is when blinds or shades are installed inside the top of the window frame. The window treatment brackets are either screwed into the ‘ceiling’ of the window opening or sides.
How to determine if a window is inside or outside mount?
When deciding inside mount vs. outside mount, the first thing you should do is measure the depth of your window frame. This must be the unobstructed depth. Check your window for obstructions like cranks, handles, alarm sensors, and tile or trim that wraps into the window opening.
What is an outside mount window blind?
An outside mount is when blinds or shades are installed on the wall above the window or directly on the window trim. Blinds or shades are made larger than the window opening for complete coverage. This mount style may be selected when there’s not enough window depth to mount inside, or when you want more coverage to darken a room.
How to measure for double hung window blinds?
For double hung windows, be sure that you measure from the farthest protruding pane to the edge of the trim. Check the product specifications for the blinds or shades you’d like to order to find out if you have enough unobstructed depth to use an inside mount.
How big should an outside mount window treatment be?
In order to get full coverage, outside mount window treatments are made several inches larger than the window opening on all sides. We recommend adding about 2″ on all sides, but be sure to follow the outside mount measuring instructions in our guide when placing your order.
When to use outside mount?
An outside mount is recommended when window frames are too shallow for mounting hardware to be installed, or when there are obstructions like window cranks, security sensors, tile or trim that prevent your treatments from lowering all the way.
How to measure for blinds?
Measure Width. Measure the width of the window open and case moldings to determine how wide you want the blinds. An outside-mount blind can overlap the window opening by as much as you wish, but it is most typical to size blinds so they cover most or all of the side case moldings, without extending past them over the wall. ...
How wide should blinds be on 42" window?
As a rule, the blinds will look nice if they extend about 3 inches beyond each side of the window opening. So a 42-inch-wide window calls for a 48-inch-wide blind that allows for a 3-inch overlap on each side. This rule can be adapted depending on the type of case moldings you have.
What are the two main categories of blinds?
There are two main categories of blinds: inside-mounted, in which the window treatment is set fully inside the recessed between the jambs; and outside-mounted blinds, which overlap the entire opening and a portion of the exposed case moldings.
What is an outside mount blind?
An outside-mount blind is a good choice if your window opening is not recessed within the jambs, or if the opening is out of square, as is often the case in older homes. An outside-mount is more easily adjusted to accommodate irregular sizes.
What is window treatment?
Window treatments are one of the great unsung heroes of contemporary home décor. Yet for all that they can do from an aesthetic standpoint, their main benefit is still the functional service that they bring to a room—providing privacy and blocking sun. There are two main categories of blinds: inside-mounted, in which the window treatment is set ...
Do blinds have a top valance?
Some blinds have a top valance that is designed for installation on the wall above the window, while others have brackets that can be attached to the top case molding. Some can be adapted for either method. Featured Video.
Do you need to list the size of the window for blinds?
Remember that you are not listing the size of the window opening, but the window opening plus whatever overhang you desire. Blinds are custom manufactured, and if you get the measurements wrong, it is you who absorbs the costs of reordering them.
