The best way to put lights on a big outdoor tree is to use a ladder. Start at the top of the tree and work your way down, wrapping the lights around each branch. How do I decorate my outdoor Christmas tree? There is no one answer to this question, as there are many ways to decorate an outdoor Christmas tree.
- Set up your ladder. Always make sure you can climb down easily.
- Mark your tree. ...
- Attach your power source. ...
- Start wrapping the light strand. ...
- Plan spacing for branches. ...
- Secure the end of your light strand with a simple knot or twist tie.
- Plug your lights in and admire!
How many lights should go on a Christmas tree?
The right amount tends to be 150 lights per strand, but you can buy Christmas lights with more lights per strand—so 200 lights per strand would work best if you want a very bright tree, while you'd want to opt for 100 lights per strand if you wanted a less twinkly look.
How to install Christmas lights on a tree?
The following steps to wrap trees:
- Starting at the base of the tree with the first string of lights. ...
- Starting with the female connection, begin wrapping the tree systematically, connecting the male end with the next light string’s female end.
- Wrap Christmas lights tightly, to ensure a snug fit. ...
How to string Christmas lights on outdoor trees?
- Plug all of the light strings in to make sure they are working and then wind each string into a ball shape. ...
- Now begin passing the ball of lights around the trunk of the tree. ...
- When you reach the end of the first string, plug the next string in and continue wrapping up the trunk and into the branches as high as you'd like to ...
Should you be hanging your Christmas tree lights vertically?
You might just find that it’s a routine that makes your life a little bit easier and can even help to make the tree look as beautiful as possible. This tip comes from designer Francisco Bilotto. He recommends hanging the Christmas tree lights vertically, rather than stringing them in a circle around the entire tree.
How do you put Christmas lights on a big outdoor tree?
1:253:37How do I install string lights on an outdoor tree for Christmas?YouTubeStart of suggested clipEnd of suggested clipHowever don't wrap them too tightly as the tree will expand. And grow throughout the year whichMoreHowever don't wrap them too tightly as the tree will expand. And grow throughout the year which could stretch the cable and damage the lights connect the second set of lights. And keep on wrapping.
How do you hang string lights on an outdoor tall tree?
0:213:53Hanging Christmas Lights on a Tall Tree - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd on the end I put a little piece of wood. With these two screws. And kind of just secured. ItMoreAnd on the end I put a little piece of wood. With these two screws. And kind of just secured. It there with a good old trusty duct tape. And this gives me a hook.
How do you put lights on a giant tree?
0:152:39THREE WAYS TO INSTALL LIGHTS ON AN OUTDOOR TREE - YouTubeYouTubeStart of suggested clipEnd of suggested clipSet wrapping around the trunk and branches. This style of tree decoration works best on trees at theMoreSet wrapping around the trunk and branches. This style of tree decoration works best on trees at the tall trunk. Such as maple birch or oak. We used one set of a 5 meter light to start wrapping.
How do you wrap lights on a large outdoor tree?
1:322:22How To Wrap Trees With Lights - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow begin passing the ball of lights around the trunk of the tree. Keep the lights pulled tight asMoreNow begin passing the ball of lights around the trunk of the tree. Keep the lights pulled tight as you go to create tension. And prevent the string from slipping down the tree. Trunk.
How do you decorate an outdoor tree with lights?
Create a ball of lights to make wrapping easier, connect the male plug to a power source at the base of the tree. ... Pass the ball of lights around the tree trunk, leaving space to wrap back down if desired.Pass the ball of lights around the tree trunk, leaving space to wrap back down if desired.More items...
What is the easiest way to hang Christmas lights outside?
8:1210:10How to Hang Outdoor Christmas Lights | Lighting Design TipsYouTubeStart of suggested clipEnd of suggested clipIf you're not comfortable going up onto a ladder another alternative is using a light clip extenderMoreIf you're not comfortable going up onto a ladder another alternative is using a light clip extender pole it allows you to keep two feet on the ground. And still clip the lights up onto the gutter.
How do you decorate a tall Christmas tree?
0:0910:565 STEPS To Decorating The PERFECT Christmas Tree! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo here's my living room as you can see I think you've seen it before but I think a really tall thinMoreSo here's my living room as you can see I think you've seen it before but I think a really tall thin tree it will look beautiful. You could go for a thicker tree depending on the size of your room.5 STEPS To Decorating The PERFECT Christmas Tree! - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you decorate a tall Christmas tree?
How do you wrap lights around a Christmas tree?
1:084:08How To Put Lights On A Christmas Tree Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipI'm going to tuck the wire in probably a good foot or. So. And then I'm gonna wrap around theMoreI'm going to tuck the wire in probably a good foot or. So. And then I'm gonna wrap around the branches and kind of move to the outer edge of the tree. And then kind of leave back in to the tree.How To Put Lights On A Christmas Tree Video - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you wrap lights around a Christmas tree?
How do you attach string lights to a tree?
If you have trees, it's easy to hang lights. Just drill a hole into a tree, install a cup hook, wrap the light around it and secure it with a zip tie. Or you can thread them through the branches and not anchor them. But, make sure you are close enough to a power outlet.
How do you string lights on a tree?
0:544:08How To Put Lights On A Christmas Tree Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipI'm going to tuck the wire in probably a good foot or. So. And then I'm gonna wrap around theMoreI'm going to tuck the wire in probably a good foot or. So. And then I'm gonna wrap around the branches and kind of move to the outer edge of the tree. And then kind of leave back in to the tree.
How do you hang lights outside without nails?
The best ways you can hang patio lights without nails is using gutter hooks, adhesive hooks, clear tape with a strong and reliable hold, using a hot glue gun, or staples to hang the lights. Other methods include zip ties, wrapping the lights around pot plants, or attaching them to the trees.
How do you decorate a tall Christmas tree?
0:0910:565 STEPS To Decorating The PERFECT Christmas Tree! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo here's my living room as you can see I think you've seen it before but I think a really tall thinMoreSo here's my living room as you can see I think you've seen it before but I think a really tall thin tree it will look beautiful. You could go for a thicker tree depending on the size of your room.
How to keep lights on a tree after rain?
Wrap your lights firmly enough to stay on the tree bark, but not as tightly as possible – if your tree swells after a heavy rain, it will need room to expand without damaging your lights. Plan spacing for branches.
How to keep wires from slipping on a tree?
Attach your power source. Run the extension cord from your house to the tree. Wrap the cord around the base of the tree a couple times and tie it in a simple knot so that there’s no risk of unplugging if anything disturbs the cord. Start about one-inch up to keep your wires out of water or snowdrifts.
How to measure a tree for decoration?
Measure the height of the tree with your yardstick or measuring tape. Then measure the circumference of the trunk. Don’t forget a separate set of measurements for any branches you’d like to decorate as well.
How to secure a light strand?
Secure the end of your light strand with a simple knot or twist tie.
How to choose a tree for extension cords?
You also want to choose a tree that 1) your extension cords will reach, and that 2) will be visible to passersby. Note which side of the tree faces the road so you can arrange the display such that the less-sightly ends of cords hang on the back of the tree.
Can you decorate outside branches?
Decorate outside branches, as inside branches may not be as visible.
Can you hang lights on trees in the winter?
Hanging Lights on Trees with Exposed Trunks. Trees like oaks, maples and beeches won’t have leaves left during the winter, so your lights will be more visible. Once you decide on a bulb size (mini, C7 or C8), you’ll need to measure the string lights you want to hang on your outdoor tree. This is a good time to test the lights to make sure all ...
What is the best way to keep outdoor lights from rusting?
When using lights outdoors, spraying a coat of multi-purpose lubricant, like our Q20 , over your lights will help to prolong their lifespan significantly. Q20 helps to stop rust and prevent water ingress, whilst prolonging performance, ensuring you get the most out of your display, year after year.
Can you put Christmas lights on a fir tree?
This will be extremely similar as to how people will normally erect Christmas Lights on a tree indoors, by simply wrapping lights around it from the base upwards. This will be done on a traditional style fir tree, albeit on a much larger scale than the artificial one that you may have indoors! We would recommend connectable lights for this , so that you can tailor the length ideally to your display. All of these come with a male and female connector, so that you can connect the lights easily as you run them around the tree.
How do you wrap lights on a large outdoor tree?
This is one of our favorite Christmas light ideas for outdoor trees. Here's how to get the best look for your scheme.
How can I make my Christmas light ideas for trees look more professional?
It's all in the planning when it comes to professional looking Christmas light ideas for outdoor trees. Before you put up the ladder and start hanging Christmas lights in your tree, you need a design in mind for your winter wonderland.
How to keep lights from slipping down tree trunk?
Keep the lights pulled tight as you go to create tension and prevent the string from slipping down the tree trunk. When you reach the end of the first string, plug the next string in and continue wrapping up the trunk and into the branches as high as you'd like to go.
How to make a tree with lights?
Step 2. Pass the ball of lights around the tree trunk, leaving space to wrap back down if desired. Step 3. When you reach the end of the first string, plug the next string in and continue wrapping up the trunk and into the branches as high as you'd like to go. Step 4.
How to wrap bushes with lights?
If you prefer to wrap your bushes and hedges with outdoor tree lights: Use random patterns throughout. For long sections of hedges, bring the source of power to the center of the hedges and string lights to the left and right.
How to wind light strings?
Plug all of the light strings in to make sure they are working and then wind each string into a ball shape. This step is important. It takes just a few seconds but it will save you tons of time by not having to deal with loose or tangled strings during your install.
What bulbs are used on evergreen trees?
C7 and C9 bulbs are the most popular on larger Evergreen and pine trees. Wrapping the canopy of larger trees allows for bright lighting without the need to wrap to the top of the tree. Utilize extending poles to reach highest parts of the tree. Evergreen Trees Wrapped with Lights. Wrap Bushes and Hedges with Lights.
What colors are used for Christmas tree lights?
Some mini light strings even have multiple bulb colors on one string to easy accomplish the perfect look for a variety of holidays! Popular color combinatons include orange and purple or purple and green lights for Halloween; red, white and blue lights for patriotic displays; and red and green, blue and white or red and white lights for Christmas. In addition to playing with tree light colors, have some fun with hanging a variety of decorations from tree branches too!
Why wrap a tree with lights?
Wrapping one or several trees with lights is an easy way to elevate the atmosphere in your outdoor spaces during any season.
