You must first choose where to hang curtain rods and select the best type for your windows:
- Measure the width of your window frame. Take note of this measurement.
- Decide whether you want your curtain rod to hang on the window frame or extend past it. In most spaces, a rod with...
- Allow about 3 inches on each side of the window. Mark the wall with a pencil to indicate...
How to hang two sets of curtains on one rod?
Instructions
- Measure your bungee cord. First, measure out a length of bungee cord at least 4 or 5 inches past where both your curtain rod hooks are on your wall. ...
- Tie your bungee cord to the curtain rod hooks. ...
- Put a layer of curtain through the bungee. ...
- Fluff the sides of your curtain. ...
What is the easiest way to hang curtains?
Part 3 Part 3 of 3: Adding Your Curtains Download Article
- Remove your rod to hang the curtains. Once you're certain that your brackets can hold your rod, remove it to attach your curtains.
- Add the curtains onto the rod. Some curtains are attached to the rod by curtain rings while others are threaded directly through the rod.
- Put the rod back into place. ...
How to hang curtains correctly the first time?
What You Need
- Curtain rod with brackets
- Screws
- Tape measure
- Level
- Screwdriver
- Pencil
- Wall anchors (optional)
How to hang shower curtains without using a rod?
- Measure the spacing for your knobs on the width of the window. ...
- Mark the spacing with a pencil.
- Using an electric drill, drill holes at the markings. ...
- Drill the screw into the holes.
- Attach the wooden knobs on top of the screws.
- Measure the width of the fabric on the curtain where you want your wooden knobs to be located.
How do you install a curtain rod holder?
0:329:17How To Install Curtain Rods & Hang Curtains | DIY Home ImprovementYouTubeStart of suggested clipEnd of suggested clipThis will be a curtain that we put from top to bottom. This is this basically soft putting pencilMoreThis will be a curtain that we put from top to bottom. This is this basically soft putting pencil marks. I use the width of this level will be my line on where my where my hanger about that's my line.
What is the easiest way to hang a curtain rod?
0:482:43How to hang curtain rods - EASY DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd make sure your curtain rod length fits the length that you actually want thinking about theMoreAnd make sure your curtain rod length fits the length that you actually want thinking about the potential curtain rod that's going to go past the anchor. Usually curtain rod kits have anchors for you.
Where do curtain rod holders go?
Curtain rod brackets are installed into the wall, onto a window frame or on the ceiling. Mounting traditional curtain rod brackets typically requires nails, screws and drilling. There are also curtain rod brackets that don't require any drilling.
How do you anchor a curtain rod to the wall?
0:292:04How to Hang Curtain Rods on Drywall : Wall Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd put the top screw into the drywall anchor. And screw it into. Place. Now we'll just take theMoreAnd put the top screw into the drywall anchor. And screw it into. Place. Now we'll just take the other screws that they've provided and put it in the bottom hole without a drywall anchor.
How do you hang curtain clips?
0:003:48Hanging Curtains Using Ring Clips (easiest method) - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou're going to make the spacing a whole lot easier you put one at the end. Either end and one inMoreYou're going to make the spacing a whole lot easier you put one at the end. Either end and one in the middle. And then you have it so you're always going to get the spacing.
How do you hang curtain rails?
1:123:50How to Put Up a Curtain Pole - YouTubeYouTubeStart of suggested clipEnd of suggested clipHold the curtain to the window and decide on the house the pole needs to be poles should be fittedMoreHold the curtain to the window and decide on the house the pole needs to be poles should be fitted at least 75 millimeters above the window frame mark. This height on the wall.
How far should curtain rod extend past bracket?
Curtain rods should extend at least 3 to 6 inches past the window frame. Just as hanging curtains above the window frame makes the window appear taller, Bob Vila writes that extending the curtain rod past the window frame makes the window appear wider.
Do curtain rods need to be hang on studs?
Well, you do NOT need a stud to hang a curtain rod, but you will need a special type of wall anchor to hold the weight. There are two different types I like to use: a drywall anchor or toggle bolts.
How high should you hang a curtain rod?
A rule of thumb (from Architectural Digest) is that curtains should be hung between four to six inches above the window frame, so install your curtain rod accordingly. When you hang the curtain rod high, it will make the window appear taller.
Should I use anchors for curtain rods?
You'll need to use plastic wall anchors to provide proper support if you're installing in drywall. Fasten the brackets to the walls using your drill or screwdriver. Having a hand tool ready often makes this job easier, since it can be hard to use a larger electric drill when mounting curtain rod hardware to the wall.
Can you screw curtain rod into drywall?
Hanging curtains on drywall is not as simple as it looks. Drywall will not hold a screw because it's not solid. If you mount a curtain rod with a screw, over time you will end up with a sagging curtain and hole. Using drywall anchors is the only solution.
How do you install plastic anchors without a drill?
0:472:33How to Put an Anchor in Drywall Without a Drill - YouTubeYouTubeStart of suggested clipEnd of suggested clipNext we would take our drywall anchor and place it right on top of our screwdriver. Then we're goingMoreNext we would take our drywall anchor and place it right on top of our screwdriver. Then we're going to take it. Put it into the hole. And just begin to tighten it in. There.
What is the best way to hang tab top curtains?
If hanging tab top curtains, a thin rod is best. A thick rod will draw the curtain up, making it hang too high.
How far should a curtain end from the floor?
If you buy tab top curtains, make sure the curtain length doesn't include the length of the tabs. Floor length curtains end 1/2 inch (1.25 cm) from the floor unless you live in a humid environment, in which case they should end 1 inch (2.5 cm) from the floor, because they will stretch more on humid days.
What is cord curtain?
A cord allows you to pull the drapes open and closed. Panel curtains, eyelet curtains and tab top curtains are meant to hang from a plain round rod. They may have a pocket along the top to push the rod through, or the rod may be threaded through eyelets or tabs.
How far should curtains be from the window sill?
Curtains that hang below the sill should extend 4 inches (10 cm) below the sill, long enough to cover the edge of the casing below the window. Sill-length curtains should skim the sill. 3. Consider how far you want to be able to draw back the curtains.
How to make sure a rod is level?
Check for level. Fit the rod onto the brackets and then use a carpenter's level to make sure that the rod is even . It should be, as long as you measured for level when marking the locations for brackets.
How far can a curtain draw back?
Bear in mind that the curtain will only draw back as far as the brackets holding the curtain rod, whether or not you have a return, and the style of the curtain will determine how much they can be compressed. The amount you can compress a curtain is called the stack back.
What bolts are used to secure heavy drapes?
If the stub is not located in the proper mounting location, toggle bolts can work to safely secure the heavy drapes on the drywall.
How to attach a curtain rod to a wall?
Measure the curtain distance from end to end and the height that you want the curtain rod to be positioned at. Using a pencil, mark the place for each of the Command Hooks. Peel off the cover for the adhesive and then press the Command Hook into the wall on the pencil mark. You want to press hard for at least thirty seconds as the glue does its magic. Repeat this step for each Command Hook that you are using. Leave your Command Hooks on the wall before placing the curtain rod on them for at least thirty minutes.
Where do you mount a curtain rod?
In this orientation, the curtain rod is secured to the drywall on the outside length of the window frame so that there is an overhang of the curtain and the window. When curtains are hung on the outside of the window frame, they block the most light and give a complete and seamless look to the window overall.
Why Don’t You Want To Use Brackets To Hang Curtain Rods?
Even though the standard way to hang curtain rods is by drilling and screwing brackets into the wall, the usual method is messy. The headache of mounting, measuring, and hanging curtain rods is real. Although the standard way is pretty universally accepted, it isn’t the only way. Here are the top reasons why you shouldn’t use brackets to hang a curtain rod.
How far should a curtain rod be from the window?
If you have windows with casted molding or beautiful and intricate designs, you probably will not want to cover them up. In this case, place a curtain rod just below the trim. The length of the curtain rod for this type of below trim mount should be at least 3 to 5 inches beyond the window frame on each side and up to six inches for a fuller look.
How to slide curtain into pocket?
With the diameter of the pocket and tension rod sorted out, you can slide the curtain into the pocket. You want the tension rod to go all the way through the pocket of the curtain and come out on the other side. Make sure you can see each end of the tension rod for the next step.
Why do you need a shorter curtain rod?
Also, you may want curtain rods with protective ends because of the change of scuffing them on the window frame . The width of the curtain rod should either be exactly even with the window frame or only slightly more full for a put-together and clean look.
What is tension rod?
Tension rods are great for a quick curtain hanging. They are poles that extend using a spring from the inside and can be loosened and then tightened again to virtually any length. They are a wonderfully different way to hang curtains and very quick to install without measurements or holes in the wall.
What is a Curtain Rod Bracket?
Brackets, also called supports, are the hardware pieces that hold the rod. Curtain rods are always attached to the wall or ceiling with brackets. These vary a lot in style, size, and shape, depending on the rod you select. Some brackets are strictly utilitarian, and nearly disappear when the rod and draperies are installed. Other brackets are decorative and designed to be a visible part of your installation.
What size curtain rod brackets are available?
For an old world, farmhouse, or rustic look, try black wrought iron curtain rod brackets, available in 3 ½, 5 ⅜, and 7 ½ inch returns. For more modern or unique window applications, the Kirsch Designer Metals Collection works best, featuring an array of black decorative ceiling, double, and bypass curtain rod brackets. Designer Metals curtain rod brackets are fully adjustable, so you can get the return size you need for your specific window applications.
What are the different types of Decorative Curtain Rod Brackets?
Decorative brackets show at all times and are an integral part of your drapery installation. It’s important that you select Drapery Rod Brackets to match and work with the rest of your decorative drapery hardware. Each bracket must be from the same collection so that they will work together to hold the rod the same way—mixing brackets from different collections or manufacturers will give you headaches, as they will not hold up the rod correctly. You also should order all components you need at the same time, so that they will match in color or finish. To ensure that all your components fit together and match, you can shop drapery hardware sets or simply choose the same size and color for all drapery hardware pieces.
What is the best material for a farmhouse curtain rod?
A newer home design trend is the modern farmhouse. The Kirsch Wrought Iron Collection is perfect with other rustic, natural-looking materials such as wood and metal. Choose between distressed, rustic, and vintage finial designs in your choice of 5 colors for your farmhouse curtain rods. Wrought iron curtain rod brackets are available with returns of 3 ½ inches, 5 ⅜ inches, 7 ½ inches, and for double curtain rods.
How high should drapery brackets be above window?
Brackets should be mounted on the window frame only as a last resort! If at all possible, the top of the drapery should be at least four inches above the frame. However, with transom windows, crown molding, and other unusual window configurations, this may present a tricky situation. Measure the space you have between the window frame and the molding or window above. Your drapery rod bracket’s footprint cannot exceed this measurement.
What time do you call curtain rods?
If you have heavy draperies, bay windows, or other distinctive windows in your home, follow our tips below, or call Customer Service Monda y through Friday, 9am - 5pm Eastern time, at 1-800-251-5009.
Can you go wrong with black curtain rods?
Black Curtain Rod Brackets. You can never go wrong with black curtain rod brackets and hardware. This color coordinates with nearly everything, so if you choose new curtains or draperies at some later date, you can use your black curtain rods for years to come, or perhaps switch out just the finials for a fresh look.
How to drape fabric around curtain rod?
Instead, wrap the fabric around the curtain rod so it drapes like a regular swag. Start by hanging one end of the swag over one end of the rod. Then, hang the other end of the swag over the other end of the rod. Let the fabric in the middle drape down.
How to put swag on curtain rod?
1. Slide the swag onto the curtain rod if it has a rod pocket. Rod pocket curtain swags have a pocket along the top edge that slides onto the rod to hold the swag in place. If your swag has a rod pocket, slide it onto the end of the curtain rod. Then, center the swag on the rod so the front of the swag is facing out.
How to keep swag from slipping down?
Hang the top of swag over the top of the curtains. You may have to pin swag to curtains to keep it from slipping down.
How many slots does a double curtain bracket have?
Double curtain brackets come with 2 slots instead of 1 so they can hold 2 curtain rods. If you want to hang up regular curtains that you can open and close along with the swag, you’ll need to use 2 rods. The swag will go on the front rod, and the curtains will go on the back rod.
How to hang swag over window?
1. Use single brackets if you’re going to hang the swag by itself. If you’re just going to have the swag over the window without any curtains, single curtain rod brackets are the way to go. Single brackets will hold up 1 curtain rod, which is all you need for the swag.
What do you need to hang a curtain swag?
To hang up a curtain swag, you'll just need a curtain rod, a couple brackets, and a drill. Once you have all your supplies, putting up the swag is a breeze! Steps.
What to do with swag around curtain rod?
Wrap the swag around the curtain rod if it’s a scarf-style swag. [11]
Curtain Rod Brackets
Curtain rod brackets are the type of suspension hardware you use for curtains, in a particular panel be it curtain rods, poles, rails, tracks, or curtain holders. They are usually hanged above the windows or placed to be on the same level with edges of the window, or anywhere you decide to hang the curtains.
Importance of Curtain Rod Brackets
The following are the importance of curtain rod brackets for your room and curtain:
Where Should Curtain Rod Brackets be placed?
Curtain rod brackets can be placed higher if you have low ceilings in the room, but if the window is wide, you can place your curtain rod brackets to fill all the spaces in the window width.
Things to Consider Before Buying Curtain Rod Brackets
Before going for a curtain rod bracket, there are three important things to have in mind.
What Types of Curtain Rod Brackets Do You Need?
The most important part of hanging a curtain in a room has to do with getting the best type of brackets for the curtain rod because they help in holding up your curtain and keeping them in its place.
How to Select Curtain Rod Brackets
What would be inserted on your window would fully be dependent on the exact type of return that your curtain bracket has, and it is also dependent on the curtain you have in your room, and the type of transformation it would bring to your room.
Conclusion
Curtain rod brackets are so important in bringing out the beauty of the curtain and enhancing the ambiance of the room, they are also critical because they are a sort of suspension for your curtains.
