- Hang the curtains. Thread the curtain onto the rod and then hang the rod in the brackets. Adjust the curtain so it is distributed evenly across the rod.
- Slide the valance onto its rod. Hold the valance in one hand and slide the rod through it. The valance should hang flat off the rod.
- Put the rod onto the brackets and hang the valance. Place the rod on the brackets for the valance. The brackets should be sturdy enough to hold the valance.
- Use a steamer to smooth out wrinkles on the valance. If you notice any creases or wrinkles in the valance, run a clothing steamer over them to remove them.
How to turn curtains into valances?
How to Use a Curtain Panel as a Valance
- Sheer Scarf Valances. A scarf valance wraps or ties around a separate pole mounted outside and in front of the rod holding your curtains.
- Heavier-Weight Scarf Valances. ...
- Pleated Valances. ...
- Gathered Valances. ...
- Tailored Valances. ...
How to hang curtains with tension cords?
Part 1 Part 1 of 3: Installing the Screw Hooks Download Article
- Choose a location for your curtains. The beauty of hanging curtains with wire as opposed to a fixed rod is that you can put them anywhere.
- Make two level marks on the wall for your mounting hooks. ...
- Drill pilot holes for the screw hooks. ...
- Work the screw hooks into the wall by turning them clockwise. ...
How to hang curtains to look like custom drapes?
TIPS: How to Hang Curtains to Look like Custom Drapes
- When in doubt, go high. I like to hang my rod six inches above the window. ...
- Have the rod extend beyond the bracket. I tend to do 2-3″, not including the finial.
- Add at least 10″ to each side of the window. It will make your window appear larger.
- Use wide panels. ...
- Skim, kiss or puddle. ...
- Steam. ...
How to hang curtains like a professional?
Hang your rod above the window and wider than the window. Use Heat N Bond to have the bottoms just barely brush the floor. Consider adding height with a bamboo or roman shade hung above the window. If you follow these tips I guarantee every curtain you ever hang will look like it was done by a professional!
Can I hang curtain and valance with one rod?
Confident decorators everywhere would say to de-stress the experience of hanging a swag valance and a curtain by combining the two window treatments on a single rod.
How much space should be between valance and curtains?
In general, the width of the valances and curtains could be anywhere between (a few inches over) the window width and (a few inches short of) the wall space. 6-inch rule: add at least 6 inches to the window width for every curtain rod you use when you order online.
Do you need a double curtain rod for a valance?
A valance is often paired with this type of window treatment requiring two curtain rods (one at the center of your window and one just above your window's trim or frame.
How far above a window should a valance hang?
about 2 to 6 inchesFor most windows, a valance should cover about 2 to 6 inches of the top of the window and window frame (this is called the window overlap), with the rest of the valance covering the wall above the window. If there is not enough room to do this, then the valance should be hung immediately under the ceiling.
How long should a valance be for a 60 inch window?
Another rule of thumb used by decorators is that the window valance depth should be 1/4 of the overall window height, plus 1 inch. A 60-inch tall window, then, would call for a 16-inch deep valance, while a 48-inch window calls for a valance about 13 inches deep.
How wide should a valance be for a 50 inch window?
A gathered valance like this needs about 2 to 2.5 times the fullness if lining and real home decor fabrics are used. So, a 50-inch wide valance realistically will cover a width of only about 20 to 25 inches.
Should my curtains touch floor?
You should aim for your curtain hem to be about 3/8" to 1/2" above the floor. Not only is this an easier length to measure for, but it also makes it simple to vacuum and sweep. It's a great option if you plan to open and close your curtains a lot since you won't need to rearrange them each time.
How wide should curtains be for 72 inch window?
How Wide Should Curtains Be For A 72-Inch Window? Let's say you want standard, thick curtains to cover your 72-inch window. You'll want to look for curtains that measure between 144 and 180 inches wide.
How do you hang a valance without a rod?
Hang a valance without a curtain rod --use adhesive Velcro and attach to top of blinds. What an improvement! Hang a valance without a curtain rod --use adhesive Velcro and attach to top of blinds.
How wide should a valance be for a 36 inch window?
To determine the width of a valance for a 36-inch window, the Window Treatment Expert website suggests adding 2 to 4 inches on each side, adding less for narrower windows and more for wider windows. For a 36-inch window, this measurement would provide you with a valance that has a width of 40 to 44 inches.
Can you hang curtains too high?
The height you hang our curtains can make or break a space. Curtain height affects privacy, as well as the light levels, color, and texture of the room. The optimal height for the curtains to be placed is anywhere from 4 to 6 inches above the frame of the window.
Should curtains go to floor or bottom of window?
Tip: Traditionally, you'd mount your curtain rods one to three inches above the top of your window frame. But my favorite trick is to hang your curtain rod higher (a couple inches below the ceiling). It'll instantly make the room feel taller and grander.
How long should a valance be on a window?
The length of the valance should be 1/4 the window height plus one inch. Using these measurements, cut a rectangle from your fabric and lining. Place the fabric and lining right sides together. Using a 1/2-inch seam, stitch the fabric and lining together, leaving an opening for turning.
How wide should a valance be for a 36 inch window?
To determine the width of a valance for a 36-inch window, the Window Treatment Expert website suggests adding 2 to 4 inches on each side, adding less for narrower windows and more for wider windows. For a 36-inch window, this measurement would provide you with a valance that has a width of 40 to 44 inches.
What is the height of a valance?
Just keep in mind that valances are normally 15-25 inches (38-63cm) high and placing the valance higher may allow the top part of the window casing to show underneath the valance when the drapery panels are opened. 3. If you like a puddled drapery bottom, add 4 inches (10cm) to the total of the height measurements.
What size valance do I need for a 72 inch window?
Window Valance Size Chart & How-To GuideFor windows measuringYou will need30 inches - 39 inches2 Valances40 inches - 48 inches2 - 3 Valances49 inches - 72 inches3 - 4 Valances73 inches - 96 inches4 - 5 Valances3 more rows
How long should a curtain rod be?
The wall-mounting brackets for your curtain rod should be half the length of the brackets for your valance. For example, if your curtain brackets are 2 inches long, your valance brackets should be 4 inches long.
What to use before installing curtains?
Before installing, be sure to use a curtain rod that can support the weight of your new window dressings. The heavier the material, the larger the curtain rod needs to be. Follow these instructions to learn how to properly hang curtains and a window valance.
What is the best way to dress a window?
Curtains and window valances are a popular option for dressing windows because they come in a variety of colors and weights. From sheer to heavy blackout curtains, your window dressings determine how much light gets into a room. Use heavy curtains for private rooms and lighter dressings for shared family rooms.
How to measure curtain rods for longer curtains?
Mark the placement of the first bracket with a pencil and tape measure . Place curtain rods higher above the window for longer curtains. Use the pencil to mark the first curtain bracket and do the same for the second. Once marked, use a level to ensure both marks are aligned.
How to measure for second valance bracket?
Mark the location for the second valance bracket. Measure from the first marking to the other side of the window. Place the marking for the second bracket 1 inch (2.5 cm) outside of the curtain rod marking. The length between the two markings should be the same length as the valance you are using.
How to mark a valance bracket?
Place the first bracket for the valance outside of the curtain rod marking, about 1 inch (2.5 cm) from the curtain rod marking. Use a blue pen or pencil to mark the location. Mark the location for the second valance bracket.
How long should a curtain rod bracket be?
Check that the valance brackets are double the length of the curtain rod brackets. So if your curtain rod brackets are 2 inches (5.1 cm) long, make sure you use valance brackets that are 4 inches (10 cm) long. Mark the location for the first valance bracket.
How to hang a valance on a rod?
Slide the valance onto its rod. Hold the valance in one hand and slide the rod through it. The valance should hang flat off the rod.
How big should a valance be over a window?
A valance is a great way to add dimension and style to your windows. It usually hangs 4 to 6 inches (10 to 15 cm) over the curtains. You can hang a valance over blackout curtains to block out light in a room or put a valance over sheer curtains to keep the room bright and open. Start by measuring the window properly for the valance.
How to remove wrinkles from valance?
If you notice any creases or wrinkles in the valance, run a clothing steamer over them to remove them. The valance should lay flat and even over the curtains so it can add style and detail to the window.
How to smooth out a valance?
Use a steamer to smooth out wrinkles on the valance. If you notice any creases or wrinkles in the valance, run a clothing steamer over them to remove them. The valance should lay flat and even over the curtains so it can add style and detail to the window.
Why do we want valances to hang high?
Why We Want Our Valances to Hang High. Valances need to frame the window, not cover its view. They need to be complementary to the window, not work against it. If your room only has an 8-foot ceiling, then a valance needs to be complementary to the ceiling as well and make up for its flaws. It should draw your eye up so ...
Why should a valance look like the illustration on the right?
It should draw your eye up so that the room appears taller than it really is, not make you feel claustrophobic in the room. In this kind of room, a valance should look like the illustration on the right rather than like the one on the left.
Why do these few inches matter?
You might be asking, why do these few inches matter? It’s for aesthetic reasons. You’ll be looking up at the valance while washing the dishes. The last thing you want is to see the window frame from this angle.
How long is a valance?
The valance itself was 19 inches long and covered just enough of the top of the window frame to create the illusion of height. This is why it’s so important for a valance to be long enough. If you buy a short 15-inch long valance, you’ll have a hard time replicating this recommendation.
Can you use valances and draperies together?
It’s increasingly popular nowadays to combine valances and draperies, but on separate windows. Typically, valances are used for narrow or standard windows, while draperies are used for extra wide windows or rows of French doors. If this is the case, you’ll want to hang all your window treatments at the same height to stay consistent, ...
Can you hang a valance on a 9 foot ceiling?
With a 9-foot ceiling, installing the valance near the ceiling is less of an issue. If your valance is installed halfway between the window and crown molding in this case, it will still hang high enough and create the illusion of height to the room.
Can valances be installed over sliding doors?
Valances can be installed over sliding doors without being annoyingly obstructive. The gold fringe on the drop of the valance in the above example is exactly 6 feet and 1 inch from the floor. This is more than enough to let the homeowners walk through the door without any problems.
How High Should a Valance Be Hung?
Remember, the idea is that a valance should frame a window’s view, not block it. This also creates the illusion of height.
How far down should valances be from crown molding?
Let’s take a look at some examples. Valances are commonly hung about an inch or two down from the crown molding in rooms with 8-foot ceilings. Faux shade valances like this one tend to be long, so it isn’t unusual for them to hang right under the ceiling line.
How to measure valance for window?
The first is to let the bottom part of the valance fully cover the top of the window and its frame. Usually, having a 2- to 6-inch overlap is a good idea. You’d then measure the rest of the drop length above to mark where the curtain rod or other hardware needs to hang. In other words, you measure your way from the bottom to the top.
How far down should a valance be?
Actually, an outside-mounted valance should frame the beautiful view, not block it. But how far down on the wall should a valance hang? For most windows, a valance should cover about 2 to 6 inches of the top of the window and window frame (this is called the window overlap), with the rest of the valance covering the wall above the window. If there is not enough room to do this, then the valance should be hung immediately under the ceiling. Let’s go into more detail and talk about what the proper way to hang a valance is.
What is the longest point on a valance?
The longest point on a valance is called its overall length. For most valances, these are the side tails or jabots, although not always. The part that really matters is the drop. You’ll usually find the drop in the center of the valance and more often than not, this is a swag or scalloped section. Keep this in mind. There are many valances that may have a 36- or 48-inch extra long jabot, yet the drop is only 20 inches.
How much should the drop of a valance be?
What Should the Drop of the Valance Be? A standard valance should have a drop of about 18 to 24 inches. You may be able to make a 16- or 17-inch drop valance work in some cases, but anything less than that may be too short.
Why do corner window balloons have to be hung lower?
These corner window balloon valances had to be hung lower because of the 4-inch crown molding.
Free Guide Of How To Hang Curtains With Valance?
Valances can be easily confused with swags, scarves, and cornices. Regardless, learning how to hang curtains with valance and similar decorative features can add a little something to your curtain’s aesthetic appearance. In this article, we will show you how to hang curtains with valance the right way.
3 Steps How to Hang Curtains on Corner Windows?
It can be when challenging when fixing your curtains on the window. To make things easy, I will teach you how to hang curtains on corner windows.
Is it possible to hang a curtain without drilling holes?
Yes, there are several options available that you can use to hang your curtain without drilling holes if you don’t want to damage your walls or drill holes in your UK apartment. There are few easy options you can use to hang your curtains. They include:
Conclusion
Wow, I hope you have learned some excellent skills today on how to hang curtains on corner windows. This skill is one thing most interior designers are always confused about as to how to hang the curtain on a corner to give it that elegance and beauty as those installed in conventional positions.
5 Steps How To Make Pleated Curtains For Beginners?
Have you ever wonder how to make pleated curtains? You might also ask yourself how to make those ordinary curtains extraordinary?
5 Steps How To Hang Curtains From The Ceiling?
How to hang curtains from the ceiling? There are five steps that you can execute. Don’t worry, all of which you can do with ease.
Free What Is The Difference Between Curtains And Drapes?
Are you confused about what is the difference between curtains and drapes?
