How to Install Outside Mount Blinds
- With a pencil, mark the points where you want to install the blinds. Make a marking on either side of the headrail casing.
- Next mark the points where the brackets will be attached. As it is an outside mount blind, the brackets will have to be placed outside the window frame.
- Hold the brackets against the marks you made and mark where screws will have to be drilled. Every bracket comes with two screws.
- Drill the screws into position and gets the brackets fixed.
- Insert the headrail into the brackets and if you are using a valance then mount that along with the head rail. Centre and install the valances. ...
- Attach the cord clips at 6” to 12” apart so that it is safe for the kids to use.
- The cords can be wrapped around the clips when not in use so that they do not pose any safety hazards to kids and pets.
How to install faux wood blinds outside Mount?
Test New Blinds
- Finish by lowering and testing your new blinds.
- When installing cordless faux wood blinds, simply pull down on the bottom rail of the blind. To raise, push the bottom rail of the blind up gently with your hand.
- While this guide focuses on cordless blinds, learning how to install and how to test corded blinds is easy and similar in process. ...
How to hang an outside Mount roman shade?
- If the 2 measurements differ by over 1⁄2 in (1.3 cm), your windows aren't square and you need to use an external mount.
- Exterior mounts are helpful if you would like to make a window appear larger than it really is. ...
- Also use an exterior mount if your window frame is worn or splintering and would like to cover it up.
How to install outside Mount vertical blinds?
Outside Mount Installation:
- Position the blinds on the wall’s surface where you want to mount it.
- Use a pencil to mark the left and right outside edges of the blinds along the bottom and sides.
- Align the brackets along your markings and drill pilot holes where the screws should go.
- Drill the screws into place to secure the brackets.
How to install outside Mount blinds with window trim?
Installing the Head Rail and Valance
- Snap the valance clips in place Attach the head rail to the valance by using valance clips. ...
- Put the head rail to the brackets After finishing drill the bracket in its place, the bracket doors should be wide opened. ...
- Attach the valance
Where to put safety bracket on blinds?
Install the safety bracket to keep your cord fairly taught. Install the bracket near the outside bottom of your window frame , where it will not interfere with the operation of your blind. Your blind may come with a decorative cover called a valance.
How to measure for blinds?
From the point at the bottom of your window where you want your blind to hang, measure up to the top of the window, the length of the blind that you ordered. Make a pencil mark at the top of your measurement, and center your headrail on the mark. Make a mark, 4 inches in from each end of the headrail.
How to attach a pencil line to a wall?
Align the top of your left bracket along the inside of your pencil line and fasten to the wall with the supplied screws. Rotate the clip at the end of the mounting bracket to make it easier to install your screws. Repeat on the right side and for any additional brackets.
What is a valance on a blind?
A valance is used to cover the top mechanism of the blind, and can be installed easily too. If your valance comes with inserts for each section, slide the inserts into the edges along the front of each one. Insert the valance ends into the corners and attach to the front.
How Do You Install An Outside Mount Blind Or Shade?
Installation for outside mounts are super easy and just as simple as install for inside mounts. Often, blinds and shades will use the same bracket type for inside and outside mount (known as a universal bracket). You'll just need to use different holes in the bracket or rotate the bracket in a different direction.
Why use an outside mount on blinds?
Choosing an outside mount allows you to use spacer blocks or extension brackets to project the blind farther away from the wall or window. This is great if your window has cranks that protrude and could get in the way of lifting or lowering the blind. It also lets the blind clear trim or molding around the window.
What Do Outside Mount Blinds Really Look Like?
The biggest differences you'll notice between inside and outside mount blinds or shades is the valance. Valance styles will vary depending on the product type and brand.
How Do You Measure For Outside Mount?
Measuring details may vary depending on the exact type of window treatment you choose. You can check out our measuring guides for each type of window treatments for more detailed instructions.
What is a valance on a roller shade?
This is just an integrated valance system, like a box that houses the roll, brackets and end mechanisms. It gives roller shades a sleeker, more finished look.
What is the difference between an outside mount and an inside mount blind?
With an inside mount, blinds can have harsh light gaps on each side limits any blackout effect. With an outside mount, you typically order several inches wider and taller than the window for full coverage.
What is an outside mount window?
Outside mount (sometimes referred to as outside brackets) means that a blind or shade is installed outside of the window frame while an inside mount is installed inside the window opening. Inside mount blinds are often flush with the window's opening and do not cover up the trim. Outside mount window treatments can be mounted on the face ...
Where is the outside mount for window blinds?
Outside mount obviously is mounted outside the window frame. They are fitted on the window molding, on the wall or ceiling above the windows. All you need are brackets mounted outside the window frame to hang the shades or blind.
Why are outside mount blinds good?
Benefits of Outside Mount Blinds. Outside mounted shades are beneficial for a number of reasons. • No matter how good the inside mounted shades are , there will be light gaps that allow streaks of light to peek through from either side of the window shades. Outside mount shades are perfect for sealing these light gaps and when paired ...
What happens if you mismatch your blinds?
If there is a slight mismatch or you fail to take into consideration the need for overlap or any obstructions then the blind will fall short, provide poor coverage, and defeat the very purpose for which you chose outside mounts over inside mount blinds .
What is a close fit blind?
A close and snug fit blind works best for outside mounts. Outside mount blinds are perfect for taking care of many of your needs and requirements which inside mounts may not be able to address. The installation of these blinds is not tough, but the measurements have to be correct.
What are horizontal shades?
You can choose horizontal shades that are perfect for small and standard windows and vertical shades that are best for dressing larger windows and sliding doors.
Why is it important to choose the right mount position for shades?
Choosing the right mount position is equally important because it can impact the functionality of the shades. Inside mount, as the name suggests is fit inside the window frame. They can be mounted deep or shallow as per your liking. They give a clean and neat appearance.
Is it hard to install outside mount shades?
Installing outside mount shades is not tough. There are however some things that you need to look out for and keep in mind when installing them. Failure to adhere to some of the guidelines can affect the functionality of these shades and spoil their appearance as well. • Measuring Height & Width of Window Frame.
Why hang blinds on the inside?
Hanging the blinds on the inside gives your window a slimmer look. Inside mounts also allow more light to shine around the edges of the blinds. Measuring for an outside mount: Measure along the outside edges of the casing that surrounds the window.
How thick are faux blinds?
Faux blinds are great! They're about 2 in (5.08 cm) thick and are a lot more stylish-looking than aluminum blinds.
How do I install a soffit track?
Is it going inside of a soffit? Anyway, usually there is a track, and it snaps into the brackets. Install the brackets and use a central point for all brackets. (3brackets per 6’+ of track) let’s say your first bracket will be 2 inches away from the window, install your next two brackets 2 inches away from the window. Hold the track with both hands put the back side in first and then clip the front end. I find securing the right side first and then the left side next is the easiest way. Then just clip in the vertical vanes and you are good to go.
How to measure for inside mount?
Measuring for an inside mount: Put your measuring tape inside the casing where the glass of the window meets the casing. Measure the width of the window at the top, middle and bottom. If there is any difference in the numbers, use the smallest figure to base your measurements off of. 2.
Where should the brackets be placed on a window?
For an outside mount: The brackets should be placed on the outside face of the window casing on both sides of the window. For an inside mount: The brackets should be placed up against the inside top corner of each side of the window. 3.
Can you paint aluminum blinds with lead?
If you plan on putting aluminum blinds in a nursery or your child’s room, make sure that the blinds you choose are painted with certified lead-free paint.
Can you put valance clips on top of ladder?
Your blinds may be made up of ‘ladders’ of blinds. If this is the case, snap each valance clip into place next to the top of each ladder--not directly on top of it. If they are put directly over each ladder, the valance clips might get caught in the cords of the blinds.
What is an outside mount window blind?
An outside mount is when blinds or shades are installed on the wall above the window or directly on the window trim. Blinds or shades are made larger than the window opening for complete coverage. This mount style may be selected when there’s not enough window depth to mount inside, or when you want more coverage to darken a room.
How to measure for double hung window blinds?
For double hung windows, be sure that you measure from the farthest protruding pane to the edge of the trim. Check the product specifications for the blinds or shades you’d like to order to find out if you have enough unobstructed depth to use an inside mount.
What is an Inside Mount?
An inside mount is when blinds or shades are installed inside the top of the window frame. The window treatment brackets are either screwed into the ‘ceiling’ of the window opening or sides.
How to determine if a window is inside or outside mount?
When deciding inside mount vs. outside mount, the first thing you should do is measure the depth of your window frame. This must be the unobstructed depth. Check your window for obstructions like cranks, handles, alarm sensors, and tile or trim that wraps into the window opening.
How big should an outside mount window treatment be?
In order to get full coverage, outside mount window treatments are made several inches larger than the window opening on all sides. We recommend adding about 2″ on all sides, but be sure to follow the outside mount measuring instructions in our guide when placing your order.
When to use outside mount?
An outside mount is recommended when window frames are too shallow for mounting hardware to be installed, or when there are obstructions like window cranks, security sensors, tile or trim that prevent your treatments from lowering all the way.
Why do you put shades on top of windows?
An outside mounted shade can be used to camouflage odd-shaped or off-center windows. Some even mount their shades higher than window opening to give the illusion of taller windows and draw the eye up. This trick works especially well when draperies are layered on top of shades.
What is an outside mount blind?
An outside-mount blind is a good choice if your window opening is not recessed within the jambs, or if the opening is out of square, as is often the case in older homes. An outside-mount is more easily adjusted to accommodate irregular sizes.
How to measure for blinds?
Measure Width. Measure the width of the window open and case moldings to determine how wide you want the blinds. An outside-mount blind can overlap the window opening by as much as you wish, but it is most typical to size blinds so they cover most or all of the side case moldings, without extending past them over the wall. ...
How wide should blinds be on 42" window?
As a rule, the blinds will look nice if they extend about 3 inches beyond each side of the window opening. So a 42-inch-wide window calls for a 48-inch-wide blind that allows for a 3-inch overlap on each side. This rule can be adapted depending on the type of case moldings you have.
What are the two main categories of blinds?
There are two main categories of blinds: inside-mounted, in which the window treatment is set fully inside the recessed between the jambs; and outside-mounted blinds, which overlap the entire opening and a portion of the exposed case moldings.
Do you need to list the size of the window for blinds?
Remember that you are not listing the size of the window opening, but the window opening plus whatever overhang you desire. Blinds are custom manufactured, and if you get the measurements wrong, it is you who absorbs the costs of reordering them.
Do outside blinds block light?
All blinds serve to provide privacy and block light, but outside-mount blinds have a large surface area that makes them a key element of room decor. Still, for all of their benefit, these blinds can be a little tricky to install correctly. Of particular importance is correctly measuring the size for your blinds.
Do blinds have a top valance?
Some blinds have a top valance that is designed for installation on the wall above the window, while others have brackets that can be attached to the top case molding. Some can be adapted for either method. Featured Video.
