- Prepare the Curtain. Most traverse curtains come with the pins already installed. Start by folding the curtains. ...
- Attach the Curtains to the Master Carrier. Locate the master carriers on the traverse rod and start by reaching for the one on the far left side.
- Connect the Curtains to the Openings along the Traverse Rod. After you’re done with the first master carrier, you can now attach more of the pins. ...
- Link the Pins and the Traverse Rod. The two pins you didn’t connect to any of the openings must be linked to the rod itself. ...
- Adjust the Placement of the Curtains. With the curtains now attached to the traverse rod, you can make adjustments until they hang properly.
How do you hang pinch Pleat curtains?
Because of their many pleats, pinch pleat curtains create a beautiful, full curtain panel that can add sophistication to any room. They're fairly easy to hang, as long as you're willing to measure when you insert the pin hooks into the back of the curtain. Then, all you do is insert the hooks into the rings or gliders on your curtain rod or track.
How to hang non-pinch pleated drapes on a traverse rod?
How to Hang Non–Pinch-Pleated Drapes on a Traverse Rod Step 1. Turn the drapery panel inside out and check for the presence of heading tape. This is a fabric-like piece,... Step 2. Measure the space from the wall to the front of the carrier on the traverse rod. Subtract 1/2 inch and double... Step ...
How do you anchor a curtain rod to a rod?
The side edges do not have pleats, but they need a hook to anchor them to the rod. Insert the hooks through the carriers on a traverse rod, or through the small eyes on the bottom of the drapery rings on a pole rod. Use a stepladder to reach the curtain rod safely. A traverse rod allows you to open and close the drapes using the pull cord.
Should curtains be twice as big as a traverse rod?
Often, the curtains must also be twice as big as the traverse rod to ensure a proper fit. A traverse rod can prove to be a good addition to your home, especially from a functionality standpoint.
What is pinch pleat curtain?
Because of their many pleats, pinch pleat curtains create a beautiful, full curtain panel that can add sophistication to any room . They're fairly easy to hang, as long as you're willing to measure when you insert the pin hooks into the back of the curtain.
How to make a pleat on a curtain?
Push the pleat either outward toward the front of the curtain (for a track or pole curtain) or inward (only for a pole curtain. Fold the area in half. Run your fingers along the fold at the top to make it more pronounced. ...
How to make a curtain look polished?
1. Fold the space between 2 pleats outward or inward. When you hang the curtain, the space between the pleat will bunch as you push the top of the curtain together. To make it look more polished, find the space between 2 pleats.
How to frame curtains in a window?
Adjust your curtains to fill the space. Move the curtain panels to the left or right in the window to frame it. If you need to add a second panel, do that on the other side of the track or rod, using the same technique to hook and hang it.
How to hang a curtain on a track?
You can hang this type of curtain on a curtain pole with rings on it or a track with gliders on it. Check to make sure all your hooks are the same size. Squeeze them slightly together if some are larger. The smaller the opening in the front of the hook, the better your curtain will stay on its hanger. ...
How to make curtains stay on hanger?
Check to make sure all your hooks are the same size. Squeeze them slightly together if some are larger. The smaller the opening in the front of the hook, the better your curtain will stay on its hanger.
How to measure for curtain hooks?
Measure the distance from the top of the hook to the top of the curtain hardware. Put one hook in place in the ring or glider. Use a tape measure to go from the bottom of the hook to the highest point of the hardware on the wall. You need this measurement so that the curtain completely covers the hardware.
How to get curtain rods to reach?
Insert the hooks through the carriers on a traverse rod, or through the small eyes on the bottom of the drapery rings on a pole rod. Use a stepladder to reach the curtain rod safely.
Where to put hook pin on pleat?
Insert the point of the hook pin into the back of the pleat, directly under the pleat seam at the mark. Push the hook up towards the top edge of the header as far as it goes. The bottom of the hook should be at the measured mark.
How to measure for drapery hooks?
Measure in from the side edge of the header about 1/2 inch, then measure down the distance for the hook placement. Insert a hook at this point on the side edges of the header on each drapery panel. The side edges do not have pleats, but they need a hook to anchor them to the rod.
How to measure the distance from the top edge of a pleat to the bottom of a drapery hook?
Measure the distance from the top edge of the header to the bottom of the drapery hook and mark a small dot at the bottom of the hook. The bottom of the installed hook will be at the mark.
What is the top edge of a drape?
Unfold the drapes and open out the top edge with the pleats. The top edge, or header, is stiffened with an inner layer of buckram, a rigid woven fabric that helps the drapes and pleats maintain their shape.
Why use pinch pleated drapes?
When made from fabrics with insulating backing, pinch-pleated drapes can improve energy efficiency, and the heavier fabrics offer elegant design options. If your windows are long or wide, the weight of the drapes may require two people to hang them safely.
Can you use drapes on an ironing board?
Drapes are difficult to handle on an ironing board, and it can be difficult to find a drapery-safe temperature setting on an iron. Writer Bio. Fern Fischer's print and online work has appeared in publications such as Midwest Gardening, Dolls, Workbasket, Quilts for Today and Cooking Fresh.
What Are Pinch Pleat Curtains?
Pinch pleat curtains are often made of heavy fabric such as suede, velvet, silk, and jacquard. They are fabulous curtains with one, two, or three pieces of fabric pinched at the top to form a crease. It adds an almost wavy look to the material from the top on downward.
What is the easiest curtain rod to install?
Most experts believe ordinary curtain rods with curtain rings are the easiest for the home decorator to manage. However, although a little trickier to install, poles with gliders offer a smoother operation.
How to spread curtain material?
Use a large table, a bed with sheets only, or even a freshly vacuumed floor to spread the material. You want to spread the back of the curtain face down, with the top of the fabric facing you.
What happens if you hang curtains on the floor?
Be careful to support the weight of the curtain until everything is strung. Otherwise, your curtains could become creased and fall on the floor.
What is the measurement of curtain hardware?
This measurement is critical as you want the fabric to cover the curtain hardware completely. A typical measurement might be three-quarters of an inch.
How to match curtains in a room?
To match curtains in a room, the first thing to look at is the wall color. The most popular colors are those that go with anything.
What are the two factors that stand out the most when choosing curtains?
When choosing curtains, the two factors that stand out the most is the colors and the material . The colors of the curtains must match the room and furniture for it to look professional. Friends and neighbors may have a persuasion over the decision, but you choose the in-home decor in the end.
How Do You Hang Curtains on the Traverse Rod?
After choosing your curtains, you can now proceed to hanging them. While these types of curtains look very intricate and sophisticated, the process of attaching them to the traverse rod is simple enough. Plus, when properly hung, they will consistently look neat and elegant, whereas, most traditional curtains require constant adjusting and fluffing when moved.
What is pinch pleat curtain?
Pinch pleat curtains are the ones that are meant to be used with traverse rods. The issue with pinch pleat curtains is that they don’t cover as much space as regular curtains. Homeowners may purchase curtains that are the same size as their traverse rod and not realize their mistake right away.
What Is a Traverse Rod?
Upon taking a closer look at a traverse rod, you’ll see that it’s quite different from a typical curtain rod.
What Are the Different Types of Traverse Rods?
Homeowners can choose from three different types of traverse rods. They bring their own strengths and weaknesses to the table so it’s important to consider your choice carefully.
Why is a traverse rod important?
The number one reason why homeowners like traverse rods so much is because of how easy they are to use.
How to keep curtains in place?
In order to keep the curtains in place, you have to connect the curtain pins with the corresponding pins. As long as the pins are well designed, you should have no trouble getting the curtains in the right spot. Your selection is limited somewhat by the fact that you need pins to be present on the curtains.
Why are curtains important?
The curtains are important elements of your home. They beautify your home while simultaneously offering privacy, light control, and even some level of insulation. Placing curtains over your windows and leaving them be is an option. If you want to continually tinker with your curtains though, using a traverse rod is advisable.
How to hang curtains with pinch pleats?
How to Hang a Curtain With Pinch Pleats and Rings. If you like the formal look of pinch-pleated curtains but you don’t want to deal with traverse draw rods, hang the curtains on pole rods using drapery rings and clips. With rings, you can open and close the curtains simply by guiding them across the pole rod by hand , ...
Where to hang curtains and rods?
Hooks can be attached to the curtains and hung on the eyes at the workspace, then the rod and curtains can be carried together to the window and hung on the brackets.
How to hang curtains with two people?
Pick up one curtain panel at the pleated top and carry it to the window. Long or extra-wide panels may be easier to handle with two people. Standing on a stepladder for safety, thread the hooks through the small eyes on the rings on the pole, one hook per ring.
How to make a pleated curtain?
3. Lay out the curtains so you can access the pleats at the top. On the back of each pleat, measure 1/4 inch down from the top edge and mark a dot with a fabric marker or pencil. Place the top of a curtain hook at the marked dot. Mark another small dot at the bottom of the curtain hook. Repeat the measured markings on the back ...
Can you hook curtains together?
Hooks can be attached to the curtains and hung on the eyes at the workspace, then the rod and curtains can be carried together to the window and hung on the brackets. You may want to place one ring between the rod bracket and the finial on each end of a pole rod.
Can you use curtain rings on prefinished rods?
Rings are versatile -- open and close just one side of the curtain as much as you desire. Curtain rings are available to match prefinished rods, or you may buy unfinished rings and paint or stain them to match your decor.
How does a traverse rod work?
A traverse rod allows drapes to be opened and closed by pulling on a cord hanging to one side of the drapes. The cord connects to pulleys in the headrail, which moves the drapery carriers across the rod. The drapes connect to these carriers by an N-shaped pin, called a drapery pin.
What is traverse rod?
Traverse rods make it easy to open and close the drapes. An intermediate skilled home sewer can utilize drapery maker tricks and successfully hang non–pinch-pleated drapes on a traverse rod, hiding the pins and providing enough support for the weight of the drapes. A traverse rod allows drapes to be opened and closed by pulling on a cord hanging ...
How to make a drapery panel?
Step 1. Turn the drapery panel inside out and check for the presence of heading tape. This is a fabric-like piece, typically 4 inches wide, that is sandwiched between the drape and the lining. If none is present, lay a piece between the layers and turn the drape right sides out.
How to check for heading tape on curtain?
Turn the curtain panel inside out and check for the presence of heading tape, which is a fabric-like piece, typically 4 inches wide, that is sandwiched between the drape and the lining. If no heading tape is present, lay a piece between the layers and turn the drape right sides out. Manipulate the tape so it is as close to the top seam as possible and pin in place across the top of the panel. If it is not possible to check between the layers, lay the tape along the wrong side of the panel and pin in place.
Where are drape pins inserted?
One straight, pointed end of the pin is inserted into the back of the drapes, and the other end is hooked through a hole in the carrier. The weight of the drapes hangs on the pins. The construction of drapes includes header tape that reinforces the fabric against the pull of the pins. With careful insertion, the pins will not be visible from ...
Where to insert sharpened end of drapery pin?
Insert the sharpened end of the drapery pin, just above the bottom bar of the U, through all layers except the face layer of the drapes.
How to measure space between drapes?
Measure the space from the wall to the front of the carrier on the traverse rod. Subtract 1/2 inch and double the measurement — this is the maximum space acceptable between drapery pins if the bottom of the carrier rests below the rod. With this configuration, the drape will fold toward the wall, between the pins, when in the open position. If the bottom of the carrier rests in front of the rod, the fabric will fold to the front when the drapes are opened, and the space between pins should not be more than 3 inches.