4 Simple Steps To Hang Rod Pocket Curtains With Hooks
- Step #1. Choosing the appropriate pin hooks Ensuring that the pin hooks are compatible with your curtain’s size and shape is very important to attach them. ...
- Step #2. Proper spacing of the pin hooks and creating pleats ...
- Step #3. Pin hook insertion ...
- Step #4. Pin hook insertion at each end of headings ...
How to hang two curtains on one rod?
- Unstitch the vertical side seams on two curtain panels that you plan to sew together.
- Unpick the stitching in the top sleeve and on the bottom hem.
- Iron the side seam marks flat along the entire length of both panels.
- Place panels right-sides together and pin.
- Stitch a 5/8-inch seam end to end, joining both panels.
How to hang a curtain rod from the ceiling?
How to Hang Curtains from The Ceiling Without Drilling
- Prepare the Material You Need. ...
- Measure the Curtain Length You Need. ...
- Mark the Place You Want to Install the Curtain. ...
- Clean the Ceiling Surface Where You Will Install the Curtain. ...
- Put the Curtain Hook in the Ceiling. ...
- Place the Rod and Curtain. ...
How to hang curtains correctly the first time?
Part 3 Part 3 of 3: Adding Your Curtains Download Article
- Remove your rod to hang the curtains. Once you're certain that your brackets can hold your rod, remove it to attach your curtains.
- Add the curtains onto the rod. Some curtains are attached to the rod by curtain rings while others are threaded directly through the rod.
- Put the rod back into place. ...
How to hang swag Curtains Without a rod?
Steps
- Get a pack of upholstery tacks in a coordinating finish.
- Do a little dry run just to determine how big to make the pleats and how many pleats you'll need to make sure your curtain panel will be positioned properly ...
- Begin by pushing the first tack into the corner of your curtain at the outside edge of the window opening.
How to hang pleated drapery panels?
Adjust the placement of your hook so that the fabric length is correct. Measure and match the hook placement for all of the remaining pleated set areas so that the drapery panels will hang level. Hang the panels on the curtain rod.
How to adjust drapery hooks?
Turn the drapery face side down. Insert the drapery hook into the header material at the center of the pleat or gathered set. The hook point faces upward and the hook faces downward. Hold your drapery up to the curtain rod and insert your first hook into a plastic slide. Support the fabric while allowing the edge to drop. This will allow you to see if you need to adjust the hook. The bottom edge of the fabric should just brush the top of the floor.
How to make a pinch pleat drapery?
If you are using a pinch pleat design you will see three pleats gathered together followed by a space. Straighten out your pleats to remove any twisted fabric. Pinch the three pleats together at the bottom of the header. Sew a tack stitch through the three pleats using needle and thread.
How to pin pleat tape on a curtain?
Pin the pleat tape 1/2 inch from the top edge of the curtain. Turn the ends under 1/2 inch for a nice end finish. The pleat tape should be drapery loop side out. Some pleat tapes have pockets for the drapery hooks; don't sew over the ends of the pockets.
How to make a header for drapery hooks?
Step 1. Measure the width of your window. To create a header to use with drapery hooks you need to use a pleat or gathering type of buckram header. Buckram header is a 4-inch-wide interfacing material sold at fabric stores. Your curtain panel width should be based on your finished pleat calculation.
How to sew a buckram header?
Pin the buckram header 1/2 inch from the top edge of the curtain. Turn the ends under 1/2 inch for a nice end finish. The buckram header should be drapery loop side out. Some header types have a specific top edge. Sew your header to the curtain panel starting at the top left side. Sew your seam from left to right.
What is a buckram curtain?
The buckram will prevent the hook from tearing a hole in the curtain fabric. Simple curtain panels can dress up a living room. Rod pocket curtain panels are a good choice of premade curtain styles to convert to more elaborate header draperies. The rod pocket is internal so the curtain panel is essentially a simple panel rectangle.
What are goblet pleats?
Goblet pleats feature a detailed heading style that looks identical to pinch pleated drapes. These pleats are tucked and folded, with an open design at the top of the curtain. The pleats have a cylindrical cuff that looks more like a wine glass. The main goblet pleat is shaped in interlining patterns and is mostly seen in grand homes with high ceilings.
What is hidden tab drapery?
Hidden tab panels are a simple way to hang your curtains as they provide a pleated look. Hidden tabs feature a series of flat loops or tabs that are sewn along the back of the curtain panel over the pole. These hidden tabs make the drapery look as though it is floating on the pole.
How to hang curtains with pencil pleats?
The neat and consistent folds resemble the size of a pencil, hence the name. You can hang your curtains using drapery pins attached to the back of the drape where the pins are out of sight. They can then be hooked onto a pole system.
What is the best way to hang drapes?
Curtain rings are another popular choice for hanging drapes. Using small hooks, you can attach your curtains to those rings before slipping them onto the rod. Curtain rings are a durable and practical solution as they allow the drapes to be easily removed and replaced.
Why are there hidden tabs on curtains?
This is because the curtain’s fabric touches the rod directly, thus making it more difficult to move. 2. Rod Pockets.
What is a rod pocket?
Rod pockets allow the curtain fabric to easily turn back on itself and create a pocket through which the rod can fit into. This allows the top of the curtain to gather slightly. With rod pockets, you’ll need to consider how often you want to open and close your curtains.
What is the best way to make a curtain panel look tailored?
4. Hanging Pins. Hanging pins are a super elegant way of creating a tailored look thanks to the plastic thread that creates loops on the curtain panel’s back. With a hanging pin , you can loop it through the plastic thread before attaching onto the ring.
Why hang curtains with hooks?
You can hang curtains with hooks to help them slide along the rod more readily if you plan to open and close them on a regular basis.
How to make a window look bigger?
Determine your window's height. Placing your curtain rod directly above your window will make your window appear narrow and cramped. Instead, mark a spot above your window, about halfway between the top of the window and the ceiling. This will make your windows and ceiling appear spacious. [2]
How to measure curtain rod size?
Ideally, your rod should be several inches (or centimeters) wider than your window to give your curtain panels enough space. Before you've purchased a curtain rod, use a measuring tape and write down your window's length.
What tool is used to reach high curtain rods?
Tools specifically made to reach high curtain rods are called curtain wands. In a pinch, you could also use a broom handle.
How to make curtains look straight?
Make sure your measurements are level. Crooked curtains can ruin the overall look of a room. Use a level and measuring tape to make sure your marked lines are straight. Continue adjusting the marks until your line is even.
How to avoid loose wall anchors?
Avoid making the hole wider than the anchor. The hole should be about the same length as the anchor's attachment areas to avoid loose wall anchors.
How to use stud finder?
To use a stud finder, run the device along the wall and watch the screen to see if a stud has been detected.
What clips can be used on rod pocket curtains?
Hooks or curtain ring clips can be used on rod-pocket curtains.
What are the different types of curtains?
There are two general types of curtains -- those that are hung with rings and those that have a pocket to slide a rod through. Each style has its own advantages and disadvantages. Specialty curtain rings with clips attached allow you to hang any type of lightweight or medium-weight curtains from a curtain rod. Advertisement.
How many rings are needed for a bathroom window?
The number of rings per package can vary, but is usually between 5 and 15. Plan accordingly.
Where to attach hooks to curtain?
Attach the hooks or clips to the curtain at the spots that were previously marked out.
Can you use hooks on curtains?
Hooks provide a more stable solution than clips, but may permanently alter or damage the fabric of the curtains. If the fabric of the curtains is woven loosely, such as a light brocade, you may be able to use hooks by sliding the tip between two threads in the fabric.
Can you pull curtains from a clip?
The weight of the window treatment may cause the fabric to pull free from the clips. Young children and pets can easily pull a curtain from a clipped curtain ring.
Who is Elizabeth Tumbarello?
Elizabeth Tumbarello has been writing since 2006, with her work appearing on various websites. She is an animal lover who volunteers with her local Humane Society. Tumbarello attended Hocking College and is pursuing her Associate of Applied Science in veterinary technology from San Juan College.
Can you use Curtain Hooks to Hang Rod Pocket Curtains?
Curtain hooks can be used on rod pocket curtains because they make the curtains easier to be used and moved at any time. When you fix the hooks on the rods, the curtains can easily be moved without stress. It will also make your toom have another beautiful look and great ambiance. It would bring out the good look of the hooks when fixed on pocket rods.
How Do You Hang Rod Pocket Curtains on a Traverse Rod?
Ensure that both traverse rods and their support are well fixed, fix the rod in the support bracket, lock it up and get the rod secured to its position.
What is the best type of curtain?
Rod pocket curtains are one of the best types of curtains and the most important thing is that they are very easy to use. Making the decision of adding a hook on the rod pocket curtains will not only turn the simple into extraordinary but would transform the look of the room and make it easier to use. This would make your curtain look more beautiful and elegant when hanged on the rails.
How many hooks do you need for pinch pleats?
You must ensure that the pin hooks are spacious enough. Also, ensure that you hang a pin on each hook to make it look pinch pleat. If you are making 10 pleats, ensure you get 10 pin hooks for the 10 pleats with additional 2 pins at each end, making it 12 hooks. While making the spacing, mark the hooks in the middle and get the curtain folded on either side and mark them. Repeat this process and mark all the places you are putting the pin into.
What is a curtain hook?
Curtain hooks are parts of hardware used to fix a curtain to its rail. They can be tiny or big but the core purpose is to use them to keep a curtain in its place. They can be able to hold any type of curtain and at any place in the house.
Why do showers have hooks?
Curtain hooks are mostly seen in the showers because of how easy they are to fix and remove at any time. They are made of standard and quality materials because they act as a barrier against rust and corrosion. They make curtains look good, stylish and also keep them strong in their place.
How to get pin hook length?
Put the pin hook at the same lines already marked out. To get the length from the top to the edge, get the pin hook eye screwed over the ring.
