A piece of pipe, such as electrical conduit pipe, makes a great extension handle for socket wrenches, pipe wrenches, or other tools to provide more leverage when loosening bolts or pipe fittings. Simply slip a suitable length of pipe over the handle of the tool, then pull on the pipe.
Full Answer
What is the two wrench leverage trick?
Using 2 wrenches to increase leverage on a tight nut or bolt. - YouTube Two Wrench Leverage Trick. Using 2 wrenches to increase leverage on a tight nut or bolt.
How do you use a socket wrench to tighten a bolt?
To use a socket wrench, follow these seven steps: Select the socket to fit the bolt or nut you’ll be tightening or loosening. Slide the socket onto the handle by clicking it into place on the square knob. Select whether you’ll be loosening or tightening.
How to get more leverage on a tight nut?
Two Wrench Leverage Trick. Using 2 wrenches to increase leverage on a tight nut or bolt. If playback doesn't begin shortly, try restarting your device.
How does a socket wrench work?
A socket wrench has a ratcheting mechanism inside it, which allows you to turn the handle back without unscrewing the bolt. Each time you push the handle forward, it grips the bolt head to screw it in, just as a regular wrench would. Unlike a regular wrench, the socket wrench’s ratchet releases the bolt head when you turn it back.
Why use socket wrenches?
What is the most confusing part of a socket wrench?
How to tighten a bolt?
What happens if you use a socket that is too big?
How to fix a socket that won't release?
How to keep sockets from getting stuck?
How to get a socket out of a bolt?
See 2 more
How do I get more leverage on my wrench?
0:201:17How to Get More Leverage Turning Fasteners Using Two WrenchesYouTubeStart of suggested clipEnd of suggested clipTurn it just want to keep want to go in like. This. Give it more torque.MoreTurn it just want to keep want to go in like. This. Give it more torque.
Is it safe to use a pipe extension to increase the leverage of a wrench?
1) Never use a pipe extension or other form of "cheater" to increase the leverage of any wrench.
Which type of socket handle provides maximum leverage to loosen a bolt?
hinged handleThe hinged handle is used when additional leverage or torque is needed to loosen nuts or bolts.
How do you use a socket wrench extender?
2:214:20How To Use A Ratchet And Socket-Tool Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou want to put it around the bolt. So right here we have a bolt on the base of the seat of the bikeMoreYou want to put it around the bolt. So right here we have a bolt on the base of the seat of the bike. I take the ratchet. I just put it around there and as you can see now.
How do you increase torque on a socket wrench?
1:434:26Increase Torque Wrench Capacity with an Extension - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlus the length on the extension divide them two numbers together and that will give you the desiredMorePlus the length on the extension divide them two numbers together and that will give you the desired torque setting on the wrench to achieve.
Does extension change torque value?
A straight extension will have no effect on the torque wrench setting.
What do teeth on a ratchet mean?
4. Ratchet Tooth Count. A ratchet's tooth count references how many teeth are on the drive gear, which translates to how far you need to move the handle to engage the next tooth. As manufacturing has progressed, and as space to work in a car has shrunk, ratchet tooth counts have gotten higher.
What are the 4 different types of sockets?
Because sockets come in all sorts of shapes, sizes, and materials, it's easy to get confused about which type is needed. With a few exceptions that include axial or festoon socket fixtures, all sockets fall into four main groups: screw, pins, wedges, and bayonets.
Which type of wrench is best to use when you want to loosen a very tight bolt?
When you're dealing with really big stuck bolts, a pipe wrench might be your best option, especially if you don't own a giant set of wrenches or sockets. The long handle and aggressive jaw teeth will loosen the most stubborn bolts. Just make sure you get the jaws tight against the shoulders.
What is a socket extender?
Socket extensions are used with sockets and hand drive tools to tighten and loosen fasteners. They connect between the drive end of the hand tool and the drive end of the socket to lengthen the reach of the tool so it can access fasteners in hard-to-reach locations.
Which way is loosen on a socket wrench?
To loosen a nut or bolt, the socket handle should turn counterclockwise. To tighten a nut or bolt, the socket should turn clockwise. If the socket is not turning in the appropriate direction, turn the lever on the back of the ratchet to switch the direction.
What is an extension bar?
An extension bar is a long, generally solid piece of metal piping that allows a user to extend the reach of a socket wrench by as much as 12 inches (30.48 cm) or more. They are commonly employed to help reach bolts that are recessed or otherwise unreachable with a standard wrench.
Can I use a pipe on a torque wrench?
Users should never put a pipe or any other kind of extension onto a torque wrench handle as doing so can seriously damage the tool and make it inaccurate, never mind the potential safety hazard.
Can you use a cheater pipe on a torque wrench?
0:361:26Cheater Bar - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou could use the cheater bar. And disattach your standard length 1/2 inch wrench.MoreYou could use the cheater bar. And disattach your standard length 1/2 inch wrench.
What type of wrench should be used to tighten a bolt to a specified degree of tightness?
Beam Torque WrenchBeam Torque Wrench This type of torque wrench allows you to fasten bolts to a precise tightness specification, as determined by manufacturers or automakers.
What is a cheetah bar?
Cheater bars are usually used to free threaded pipe, screws, bolts, and other fasteners that are difficult to remove with a ratchet or pipe wrench alone. Cheater bars are also commonly used to operate valves.
Why use socket wrenches?
One of the benefits of socket wrenches over traditional wrenches is the detachable so ckets. When attempting to find the right-sized socket, you can simply slip a socket over the bolt to see if it fits. This is much easier than trying out different wrenches.
What is the most confusing part of a socket wrench?
One of the most confusing parts of using a socket wrench is putting it together. The first thing to do is to identify the different parts of it.
How to tighten a bolt?
Select the socket to fit the bolt or nut you’ll be tightening or loosening. Slide the socket onto the handle by clicking it into place on the square knob. Select whether you’ll be loosening or tightening. Place it on the bolt or nut. Twist the handle like you would a standard wrench.
What happens if you use a socket that is too big?
With a socket that’s too big, the inside of the socket chips and damages the bolt head. If you continue to attempt to use the wrong sized socket, the corners of the bolt head will wear out. Once it’s been damaged enough, you won’t be able to get a grip on it with a socket or wrench and a specialty tool will be required to remove it.
How to fix a socket that won't release?
If it doesn’t release, first try applying WD-40 where the socket connects to the head. Allow it to sit for a few minutes at least before attempting to rerelease the socket.
How to keep sockets from getting stuck?
Pro Tip: Regularly applying a lubricant such as WD-40 and keeping your socket wrench in a dry location when you aren’t using it will help prevent the wrench and socket from getting stuck together.
How to get a socket out of a bolt?
Place it on the bolt or nut. Twist the handle like you would a standard wrench. Don’t remove it from the bolt or nut; simply twist it in the opposite direction. Continue twisting one way, then the other, until you’re finished. As simple as that sounds, you may still find yourself overwhelmed when trying to select the right socket, ...
Why use socket wrenches?
One of the benefits of socket wrenches over traditional wrenches is the detachable so ckets. When attempting to find the right-sized socket, you can simply slip a socket over the bolt to see if it fits. This is much easier than trying out different wrenches.
What is the most confusing part of a socket wrench?
One of the most confusing parts of using a socket wrench is putting it together. The first thing to do is to identify the different parts of it.
How to tighten a bolt?
Select the socket to fit the bolt or nut you’ll be tightening or loosening. Slide the socket onto the handle by clicking it into place on the square knob. Select whether you’ll be loosening or tightening. Place it on the bolt or nut. Twist the handle like you would a standard wrench.
What happens if you use a socket that is too big?
With a socket that’s too big, the inside of the socket chips and damages the bolt head. If you continue to attempt to use the wrong sized socket, the corners of the bolt head will wear out. Once it’s been damaged enough, you won’t be able to get a grip on it with a socket or wrench and a specialty tool will be required to remove it.
How to fix a socket that won't release?
If it doesn’t release, first try applying WD-40 where the socket connects to the head. Allow it to sit for a few minutes at least before attempting to rerelease the socket.
How to keep sockets from getting stuck?
Pro Tip: Regularly applying a lubricant such as WD-40 and keeping your socket wrench in a dry location when you aren’t using it will help prevent the wrench and socket from getting stuck together.
How to get a socket out of a bolt?
Place it on the bolt or nut. Twist the handle like you would a standard wrench. Don’t remove it from the bolt or nut; simply twist it in the opposite direction. Continue twisting one way, then the other, until you’re finished. As simple as that sounds, you may still find yourself overwhelmed when trying to select the right socket, ...