Using an electric drill, drill a hole on the edge surface of the door at the location you desire. Mount a strike plate on the door jamb that is opposite to where the spring loaded ball catch location is. This holds the door closed. A pull on the door will release the catch.
How do you mount a ball catch on a door?
The ball catch can be mounted on the top, bottom, or side of the door. Here is a how-to on mounting this type of hardware in your interior doors. Using an electric drill, drill a hole on the edge surface of the door at the location you desire. Mount a strike plate on the door jamb that is opposite to where the spring-loaded ball catch location is.
What is the purpose of a ball catch latch?
The ball catch latch provides a more optimal location for a door latch that avoids the typical door latch location. By moving the latch mechanism to the top of the door, you can secure the door in a less obvious way. A ball catch latch is a simple, but strong way to close a door.
How do you install a ball catch on a pool table?
Insert the ball catch cylinder in the hole. Push the ball catch plate into the cut recess. Insert one screw in the top mounting hole of the catch plate. Turn the screw clockwise with a Phillips screwdriver until tight. Repeat the process on the bottom mounting hole.
What is a ball catch on a closet door?
Door catch (such as handles or knobs) A ball catch is generally used on linen closet doors where a latch is not used or needed, but it can also be used on kitchen cabinet doors or where two double doors meet without a center door jamb.
How do you install ball catch hardware?
0:000:32Drive in Bullet Ball Catch from Ultra Hardware - YouTubeYouTubeStart of suggested clipEnd of suggested clipIs easy start by marking the top of the door. And drill the 7th H inch hole for the body of the ballMoreIs easy start by marking the top of the door. And drill the 7th H inch hole for the body of the ball catch. Set the catch in the hole by pressing down and use a rubber mallet or hammer.
How do you install a closet door catch?
4:506:22DON'T USE A BALL CATCH LATCH! (Use this instead...) - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd I use a small drill bit to drill a pilot hole there. Then put the metal plate back on and attachMoreAnd I use a small drill bit to drill a pilot hole there. Then put the metal plate back on and attach it with a flat top screw.
How do you fix a ball catch latch?
2:167:54How to Fix a French Door Ball Clasp - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo if you take your pliers or your needlenose pliers. And you stick them in those notches. You canMoreSo if you take your pliers or your needlenose pliers. And you stick them in those notches. You can just retighten that thing you want the cylinder to be beneath. The edge there so it's not visible.
How do you replace a ball catch on top of a door?
0:121:17How To Replace the Ball Catch on an Interior Door - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe door from the frame. And set it on sawhorses if necessary then using a putty knife pry the oldMoreThe door from the frame. And set it on sawhorses if necessary then using a putty knife pry the old ball catch from the door. Next press the new ball catch into the hole until it's flush.
What is a ball catch?
Ball catches are small pieces of door hardware inserted into the top of an interior closet or pantry-type door. They're ideal for doors without a standard door knob with a latching system and strike plate, and are mostly used in double-closet doors with dummy door knobs.
How do you set up a double ball catch?
3:105:47#37 - Installing Double-Bullet Catches - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe part that goes onto the door and of course you can see exactly where this is going you can thenMoreThe part that goes onto the door and of course you can see exactly where this is going you can then take the door close it push on it a little bit hard and then pull it out gently.
How do you replace a ball on a French door clasp?
1:554:18How to Replace a French Door Ball Clasp - YouTubeYouTubeStart of suggested clipEnd of suggested clipThey drop it in like that. They're going to put our two screws in to hold it in place during thisMoreThey drop it in like that. They're going to put our two screws in to hold it in place during this step there's nothing really magical about it you just take a screw you're gonna seat it like. This.
How do you adjust a door catch?
0:401:34How to adjust a door latch/keeper - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhat you need to do. Let's take your flat screwdriver and then if you insert it into the slot youMoreWhat you need to do. Let's take your flat screwdriver and then if you insert it into the slot you can just prise it over. Okay you can see there you can just move over as much you need okay.
How do you tighten a spring latch?
0:343:11How to change the backset of an entry latch - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's as simple as pulling it straight back or pushing forward keeping the squared cut out squaredMoreIt's as simple as pulling it straight back or pushing forward keeping the squared cut out squared with the rest of the latch.
What do you need for a door catch?
Door catch (such as handles or knobs) What You'll Need. Ball catch hardware. Electric drill. Carbon trace paper. Lubricant. Door catch (such as handles or knobs) A ball catch is generally used on linen closet doors where a latch is not used or needed, but it can also be used on kitchen cabinet doors or where two double doors meet without ...
Where to mount strike plate on door?
Mount a strike plate on the door jamb that is opposite to where the spring loaded ball catch location is . This holds the door closed. A pull on the door will release the catch. When installing the strike plate, be aware of the following two issues: Lining up the striker and ball catch properly.
How do I install a closet ball catcher?
Step 1: Install the Ball Tube. Line up the ball tube and mark where you want it on the top of the door. Make pencil marks where any screws will go. Some of the closet ball catches are simply sunk into the door with wood glue, others will require screws to hold it. A third type just screws into the wood itself.
How to make a door jamb with a pencil?
With the pencil, place a small pencil mark on the inside of the door, corresponding with the center of the ball. Shut the door and continue the mark to the door jamb. Open the door again and mark across the jamb. Measure the offset from the side of the door to the ball center and mark across the line on the jamb.
