how do you install a belgian block

Full Answer

How do you install a Belgian block on a driveway?

How to Install a Belgian Block Along a Driveway. Drive a wooden stake into each end of the trench on both sides of the driveway. Tie a mason's line tightly between the stakes in each trench, and set the line so that it's the height you want the blocks to be. Lay 10 blocks on the driveway along the trench. Mix a batch of concrete,...

Do Belgian blocks need to be in the ground?

At least half of Belgian blocks should be set in the ground, but you can set the stones even with soil grade to make a clean mowing edge. 1. Choose how you wish to install the block and measure the dimensions of the block to determine the width and depth of the trench needed.

How do you make a garden edging for a Belgian block?

Lay garden hoses or rope to lay out the design for the edging; make the layout about 4 inches wider than the actual space needed for the Belgian block. Spray the ground beside the hoses with landscaping spray paint. The width for the trench depends on how you have chosen to install the blocks.

What is Belgian block edging for driveways?

The edge of the lawn around your driveway often suffers from being run over by cars, high temperatures from the driveway absorbing heat from the sun or salt being spread on the driveway in the winter, which winds up in the grass. You can improve the appearance of the driveway by installing Belgian block edging.

Install a system that works well with Belgian block

If you’re installing a Belgian block garden in your home, it’s important to know how the system is going to work with your edging. This can be as simple as placing it on the wrong side of a wall or creating an awkward installation that makes it difficult for your kids or pets to play in.

Care about your edging and care about your money

If you’re installing a Belgian block garden edging, you need to be sure that it works properly. You don’t want your edging to come loose or fall off or become damaged.

Take the time to understand each part of the installation process

Your Belgian block garden installation requires advance preparation and a lot of thought. You need to know how to properly set up your edging so that it looks just right, and then you need to make sure that everything is in place before you begin.

Take the time to volts measure each part of the installation

Belgium block garden edging installation is made up of a series of steps. It’s important to take the time to measure each part and make sure that you can do everything correctly. This includes measuring the height, width, length and depth of your garden edging with the top down.

Take the time to clean all of the areas every day

There are many different steps involved in the installation of a Belgian block garden. One of the most important things to note is that you do not want to try and install it on your own. This can be very dangerous if there is any chance that you might damage anything, because you could end up damaging it as well.

The benefits of Belgian block garden edging

For years now, people have been using garden edging in a variety of ways. One of the most common ways is as a border around their gardens. The blocks are made from Bruin Oudou and are decorative, which allows them to stand out from the rest of your lawn. Garden edging has also long been used in conjunction with other types of plants.

Care for your plants

It’s important to take care of your plants, but you need to do so in a way that makes them happy. Belgian block garden edging is an excellent way to do this. Belgian block garden edging blocks are firm and durable against the skin, meaning they will perform well over time.

How to lay Belgian block?

Lay garden hoses or rope to lay out the design for the edging; make the layout about 4 inches wider than the actual space needed for the Belgian block. Spray the ground beside the hoses with landscaping spray paint. The width for the trench depends on how you have chosen to install the blocks. If you lay the blocks with the long sides touching, the trench will be much wider than if you lay them with the short sides touching. The extra width provides room to work in the trench while you lay the stones.

How to prevent Belgian blocks from shifting?

You can choose virtually any layout to create edging for your garden, but you must provide a sturdy base layer to prevent the Belgian blocks from shifting. Clay soil has poor drainage, which means water pools beneath the blocks and slowly erodes the clay. This is often the cause of swales in cobblestone and Belgian block streets. Increase the depth of the stone base layer to a total of up to 12 inches in very clay soil to support the blocks, especially when installing edging along flat, paved surfaces where shifting is even more noticeable.

What is Belgian block edging?

Belgian block, more commonly known as sett stone, is quarried stone cut into rough, rectangular shapes, and is often confused with cobblestones which vary in size and shape. Belgian block was once widely used to pave streets and can still be found in some cities hundreds of years after installation.

How to level a stone base?

Spread 1 inch of coarse masonry sand over the stone base layer. Use a block of scrap two-by-four lumber to spread it evenly. Check the sand base for level and add or remove sand as needed to make the sand base level.

Can Belgian blocks be used for landscaping?

Belgian block is now most commonly used decoratively in yards and proves a durable material for edging flower beds, driveways and walkways. At least half of Belgian blocks should be set in the ground, but you can set the stones even with soil grade to make a clean mowing edge.