Thread the harness straps through the correct slots to the back of the Marathon. Reattach the harness straps to the harness yoke. Pull the harness adjuster lever to tighten the straps as needed to fit your child. Tips. The Britax Marathon can go to a reclined position when it is forward-facing.
Can I install a Britax car seat using the latch?
No. Britax car seats should be installed using only one installation method – either the vehicle’s seat belt and car seat tether (if anchor is available) or LATCH. Parents should always refer to the car seat user guide with any questions. I have installed my car seat using the LATCH but the seat is moving left to right. Is this safe?
Is the Britax Marathon a good choice for a toddler car seat?
The finish of the Britax Marathon is a sight for sore eyes, but that’s reasonably expected with a toddler car seat that is on the upper end of the mid-range in terms of price point.
What is the Britax Marathon’s warranty policy?
The Britax Marathon indicates in the user manual that this convertible car seat is warranted against defective materials or workmanship for one year from the date of original purchase. It’s required to provide proof of purchase to claim for this warranty. And Britax will, at its option, provide repair or replacement components for this product.
See more
How do you install a Britax Marathon Clicktight front facing?
0:481:33How to Install Forward-Facing with Vehicle Seat Belt: Britax ClickTight ...YouTubeStart of suggested clipEnd of suggested clipSlide both the lap and shoulder parts of the vehicle seat belt through the forward-facing belt pathMoreSlide both the lap and shoulder parts of the vehicle seat belt through the forward-facing belt path be sure the vehicle belt is not twisted. And buckle the seat belt.
How do you install a Britax car seat rear facing?
0:001:43How to Install Rear-Facing with Lower Anchors: Britax ClickTight ...YouTubeStart of suggested clipEnd of suggested clipLeft side you'll need to adjust the recline angle. Pull recline handle and rotate the seat shellMoreLeft side you'll need to adjust the recline angle. Pull recline handle and rotate the seat shell until the recline indicator ball is in the correct position for the rear-facing.
How do you install a Britax car seat base?
0:001:37Britax B-Safe 35 & 35 Elite Infant Car Seat Installation Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress the lower connectors onto their adjacent vehicle lower anchors until a click is heard pull.MorePress the lower connectors onto their adjacent vehicle lower anchors until a click is heard pull. The lower connectors to verify. They are secure. While pressing the center of the base into the seat.
How do you install a Britax car seat with hooks?
0:000:58BRITAX B-SAFE: Installing the Base using the LATCH System - YouTubeYouTubeStart of suggested clipEnd of suggested clipOpen the lock off. Press. And hold the gray latch adjuster release button and pull to lengthen theMoreOpen the lock off. Press. And hold the gray latch adjuster release button and pull to lengthen the strap. Place the base in the desired location on the seat.
How do you install a forward-facing car seat?
0:030:52How to install your forward facing car seat - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst find a seating position with a top tether. Anchor. Then place the car seat upright in the car.MoreFirst find a seating position with a top tether. Anchor. Then place the car seat upright in the car.
Where do you put forward-facing car seat?
If it's the only car seat, the safest place to put a forward-facing car seat is on the center seat of the back seat. The same can be said for a rear-facing car seat as well. It's statistically proven that the center seat is the safest place to put a car seat.
How do you install a car seat step by step?
With a Seat BeltRead your car seat's instruction manual and your vehicle's owner manual. ... Place the car seat base in the back seat of your vehicle.Carefully thread the seat belt through the rear-facing belt path. ... Buckle the seat belt.Lock the seat belt.Press down firmly on the car seat base and tighten.More items...
Does the Britax car seat need a base?
The B-Safe can also be used without the base. First, detach the little elastic bands that secure the cover near the carry handle hinge, and pull up the cover to expose the guides. Then simply run the lap portion of the belt through the guides, engage the seat belt's locking function, and tighten.
How do you fit a Britax car seat?
0:023:13FIRST CLASS PLUS - Installing the Seat | Forward Facing - YouTubeYouTubeStart of suggested clipEnd of suggested clipHere apply some weight onto the seat holding the diagonal belt with your left hand pull tight andMoreHere apply some weight onto the seat holding the diagonal belt with your left hand pull tight and feed the slack through the diagonal seatbelt guide make a loop out of the seatbelt.
Does Britax Marathon have LATCH?
There's no LATCH system installation or adjustable harness and recline.
How do you install a Britax car seat without a LATCH system?
1:472:41BRITAX B-SAFE: Installing without the Base - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace the infant carseat rear-facing on the vehicle seat. Pull the vehicle seat belt out and routeMorePlace the infant carseat rear-facing on the vehicle seat. Pull the vehicle seat belt out and route it through the belt guides. Verify. That the vehicle seat belt is not twisted.
How do you install car seat hooks?
0:141:22Installing Forward-Facing Car Seat with LATCH System - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou'll attach the seat with the 2 belted hooks to anchor bars located. Below the seat back checkMoreYou'll attach the seat with the 2 belted hooks to anchor bars located. Below the seat back check that the anchor belts are securely attached to the anchor points and pull the tightening strap.
How do you install a rear-facing car seat?
With a Seat BeltRead your car seat's instruction manual and your vehicle's owner manual. ... Place the car seat base in the back seat of your vehicle.Carefully thread the seat belt through the rear-facing belt path. ... Buckle the seat belt.Lock the seat belt.Press down firmly on the car seat base and tighten.More items...
How do you install a rear-facing car seat without a latch?
2:164:17Graco Grows4Me Car Seat Install without LATCH System - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo first thing you want to make sure your arrow and your seat are pointing in the right directionMoreSo first thing you want to make sure your arrow and your seat are pointing in the right direction which should be rear. And that your seat is parallel with the pavement.
Can Britax car seat be rear-facing?
It will rear-face right up to 25kg, but also has a forward-facing option to 18kg.
How do you put a baby in a rear-facing car seat?
2:467:12Car Seat Safety by Age: Rear-facing Car Seats for Babies - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnly seat that has a lock off mechanism that locks the seat belt pull the seat belt out andMoreOnly seat that has a lock off mechanism that locks the seat belt pull the seat belt out and carefully thread it through the belt path of the car seat buckle the seat belt.
Where to send Britax restraints?from manualslib.com
Send your name, address, and the restraint’s model number and manufacturing date to Britax Child Safety, Inc., 13501 South Ridge Drive Charlotte, NC 28273, or call 1-888-4BRITAX, or register online at www.BritaxUSA.com. For recall information, call the U.S.
What is the maximum weight for a Britax page 24 restraint?from manualslib.com
Page 24 Restraint must be in full upright position when installed in forward-facing mode with children over 33 pounds (15 kg.). • Britax recommends use of Versa-Tether® to improve installation. Remove Versa-Tether from pouch and loosely attach to an approved tether-anchorage point (pg. 24).
How to remove harness buckle from child restraint?from manualslib.com
Page 37 Harness Buckle Removal Fully recline the child restraint. Locate the metal-buckle strap retainer on bottom of the restraint. Pull retainer away from child restraint to loosen. Turn the retainer so the short side will go through the slot in restraint shell. Push the retainer through slots in the shell and cover, to the top of the restraint.
How to install Versa Tether?from manualslib.com
Page 26 Installation: Versa-Tether Using the Versa-Tether Consult your vehicle’s owner’s manual for approved tether-anchorage locations. Locate the tether on rear of restraint and place up and over seat back while securing restraint. Secure child restraint by a seat-belt or LATCH system. Press and hold tilt-lock adjuster, then pull to fully extend tether strap into a "V"...
What is a Britax Parkway SGL?from instamotor.com
The Britax Parkway SGL lends itself to the booster seat audience, providing adjustable head protection and deep side walls that engulf your child in a protective shell. Like all other Britax models it comes with an easy-to-use latching system, making it very convenient for parents to either keep locked in the car or remove when needed.
What is page 28 of Britax?from manualslib.com
Page 28 Discontinue use of child restraint and contact Britax Consumer Services for further instruction. IMPORTANT: Regardless of whether loops have...
What is Britax chair?from instamotor.com
Chairs are equipped with multi-layered side-impact protection, an impact-absorbing base, a tethering system that serves to slow forward movement, and uses energy-absorbing side-impact cushions.
How much space does a Britax child seat need?
SOME older BRITAX child seats with flexible attachments allowed use in a seating position with up to 20 inches (50.8 cm) of space between the LATCH anchors if the vehicle manufacturer allows.
How far apart can Britax child seats be?
Britax child seats can only be used with lower anchors in a vehicle designated LATCH seating position with a standard spacing between LATCH anchors is 11 inches (27.9 cm).
How much does a tether reduce forward movement?
The use of the tether when installing a forward-facing car seat can reduce forward movement of the child’s head by 4 to 6 inches in the event of a crash.
When should a car seat be switched from lower anchors to a vehicle seat belt?
The installation of a car seat should be switched from lower anchors to a vehicle seat belt and car seat tether when the child’s weight meets or exceeds the maximum child weight indicated on the car seat label, in the car seat user guide and in the vehicle owner’s manual.
Where is the tether strap on a car seat?
The tether strap is typically located on the upper part of the back of the car seat. Parents should read the car seat user guide to understand how the tether works. The use of the tether when installing a forward-facing car seat can reduce forward movement of the child’s head by 4 to 6 inches in the event of a crash.
Does Britax recommend car seats next to side impact air bags?
Britax recommends that caregivers follow directions provided by the vehicle manufacturer for installation of car seats next to side impact air bags.
Can you use lower anchors on a car seat?
No. The label required by NHTSA that indicates maximum child weight for installing a car seat with lower anchors is specific to the vehicle’s particular lower anchors. The vehicle owner’s manual and car seat user guide should be reviewed for specific direction for tether anchor use.
Can a Britax car seat be installed forward-facing?
The use of the tether when installing a forward-facing car seat can reduce forward movement of the child鈥檚 head by 4 to 6 inches in the event of a crash. Can a Britax child seat be installed in the rear center seating position using the lower anchors of the outboard seating positions?
Does Britax recommend using top tethers?
Does Britax recommend using top tethers? Since the use of the tether increases the performance of a child safety seat during a crash, Britax recommends using the tether at all times for car seats equipped with a tether. The tether should be used for forward-facing car seats installed using the vehicle seat belt or LATCH system.
Which Britax models use the inflatable seat belt system?
At this time, ONLY the Ford Motor Company (Ford and Lincoln vehicles) Inflatable seat belt system is approved for use with the following BRITAX models: 鈥?B-SAFE (please note: this is the retired model with 30 lb. capacity);
Britax Car Seat Installation
Congratulations to you as a new parent or first-time parent as you welcome your bundle of joy.
How to Install Britax Car Seat Base – Installation with the Base
You can decide to install your Britax car seat with or without the base. While learning both is important, it is noteworthy that installing infant seat without base comes as a necessity when you have to switch cars often or use a taxi. Most States’ car seat laws require using the appropriate child restraint system when you board a taxi.
How to Install Britax Car Seat without Base – Installation without the Base
You will need this knowledge when you have to use your Britax car seat without the base, say in a taxi or cab, or when you have to switch cars, or maybe you prefer without the base; however, it is not illegal.
How to Install Britax Car Seat – Convertible Car Seats & All-In-One Car Seat
While we just looked at how to install rear-facing-only Britax car seats, here will cover convertibles and all-in-ones such as the Britax Boulevard Clicktight, Britax Advocate Clicktight, and the Britax Marathon Clicktight in both the rear-facing and forward-facing modes.
Harness Height Adjustment
When the child seat is in the rear-facing position, the harness straps should be placed in the closest position at or below a child’s shoulders.
Who is the Britax Marathon ClickTight Convertible Car Seat?
This car seat is for parents who want the most secure car seat available. It’s super easy to install no muscles required.
What can the Britax Marathon ClickTight car seat do for you?
Have you ever wanted a car seat that can be installed after watching just one video? Well, finally, the Britax Marathon answers this call. Thanks to the Clicktight tech, you’re set.
Britax Marathon shortcomings
The perfect car seat hasn’t been invented yet. This Britax might look perfect, but it still has flaws. Let’s see if they are a deal-breaker for you.
How To Get The Most Out Of Britax Marathon ClickTight Convertible Car Seat?
When you get this seat, you have to decide where you want to install it. The safest spot is in the middle of the car. It’s true that for some, this is not possible. So do pick the second safest place, which is behind the driver.
Conclusion for the Britax Marathon Review
As you have seen, this is a secure car seat. If the baby was unharmed in that crash, then it will protect your little one as well. It’s heavy, but that’s a compromise you will have to do if you want the safest car seat. Besides this, it has a narrow profile, so three across is doable.
6. Crash Tests and Safety Ratings
Like all the other car seats for sale, the Britax Marathon meets or exceeds the Federal Motor Vehicle Safety Standards (FMVSS 213) .
12. Warranty
The Britax Marathon indicates in the user manual that this convertible car seat is warranted against defective materials or workmanship for one year from the date of original purchase.
13. Britax Marathon User Manual
Reading the user manual should be the first and most important thing when you get the car seat.
