Hook the drain hose over the lip of the standpipe In North America, a standpipe is a type of rigid water piping which is built into multi-story buildings in a vertical position or bridges in a horizontal position, to which fire hoses can be connected, allowing manual application of water to the fire. Within the context of a building or brid…Standpipe
How do I install a drain hose on my washing machine?
Insert the free end of the drain hose (A) into the drain opening in your home. The drain opening in your home may be a standpipe or a wall drain. If the water valves and drain are built into the wall, fasten the drain hose (A) onto one of the water hoses with a cable tie (B) provided with the washer (the ribbed side of the cable tie faces inside).
How do you hook up a washing machine to a sink?
To install a washing machine, start by connecting the water supply hose to your new washing machine. Then, take the drain hose that's attached to the washing machine and lay the end over the edge of a nearby sink or basin. If there isn't a nearby sink or basin, you'll need to attach the drain hose to a standpipe.
How high should the drain hose be on a whirlpool washer?
Note: If the drain is not 30" high, use the Drain Hose Clip (sometimes called an Anti-Siphon Clip) provided with the Top Load washer install kit to lift up the drain hose. The clip attaches to the hose and to the back of the washer. The discharge height MUST NOT BE LESS THAN 24 INCHES and no more than 8 feet above the base of a Front Load washer.
What size hose do I need to run a washing machine?
The standpipe or wall drain must have an inside diameter of 1-1/2" minimum and must be open to the atmosphere. The length of the supplied hose from tip to tip on a Top Load and Front Load washer is approximately 60".
How do I install a washing machine drain hose?
2:114:40Washing Machine Drain Hose Installation Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure that the drain hose extends no more than eight inches into the drain pipe or standpipe.MoreMake sure that the drain hose extends no more than eight inches into the drain pipe or standpipe.
How do you secure a washer drain hose?
if there isn't a wall suitable for fastening nearby, attach the hose to the drain pipe. Use a cable strap to secure it at least 6 inches from the top of the pipe.
Where does washer drain hose go?
The drain hose is usually found on the back of the washer, along with two separate hoses for both cold and hot water supply. The drain hose carries wastewater out of the machine, while the hot and cold water supply hoses bring clean water in.
How do you install a drain hose on a front load washer?
0:272:51[Front Load Washer] Installing the Drain Hose - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you are using a sink just hang the elbow bracket over the side of it. Then secure the drain hoseMoreIf you are using a sink just hang the elbow bracket over the side of it. Then secure the drain hose with a tie strap or a safety chain. And you are all done.
How do you stop a washing machine drain hose from leaking?
0:421:26Washer Drain Hose Leaks - YouTubeYouTubeStart of suggested clipEnd of suggested clipBegin by removing the two screws on either side of the drain. Hose. Then push in on the hose.MoreBegin by removing the two screws on either side of the drain. Hose. Then push in on the hose. Working it up and down until the retaining clip is flushed to the back of the washer.
Does washing machine drain hose need air?
It is important to have a sizable air gap between the end of the drain hose, and the bottom of the sink. An air gap prevents backwater from ever getting sicked back into your washing machine.
How far should washer drain hose go into drain pipe?
For new Top Load washers, the drain hose should be no more than 5" down into the drain pipe. For Front Load washers, the drain hose should be no more than 7" down into the drain pipe.
How high should washing machine drain hose be?
Drain Pipe The distance from the base of the washing machine shouldn't be higher than 8 feet and no less than 18 inches. A standard drain pipe measures 2 inches in diameter and should be able to accommodate most drain hoses. Your drain hose needs to be at least 34 inches in length to prevent it from falling.
How do you clamp a washing machine drain hose?
0:191:48WP356138 Replacing Your Washer's Drain Hose Clamp AP6008714 ...YouTubeStart of suggested clipEnd of suggested clipSo with our pair of pliers. We're just going to grasp onto the clamp. Pull like this then take theMoreSo with our pair of pliers. We're just going to grasp onto the clamp. Pull like this then take the hose. Pull it out then pull out your clamp. Next grab your new OEM replacement clamp.
How do you clamp a washing machine drain hose?
0:191:48WP356138 Replacing Your Washer's Drain Hose Clamp AP6008714 ...YouTubeStart of suggested clipEnd of suggested clipSo with our pair of pliers. We're just going to grasp onto the clamp. Pull like this then take theMoreSo with our pair of pliers. We're just going to grasp onto the clamp. Pull like this then take the hose. Pull it out then pull out your clamp. Next grab your new OEM replacement clamp.
How do you secure a washer drain hose to a kitchen sink?
How to Connect Washing Machine Drain Hose to SinkStep 1: Inspect your sink underside. ... Step 2: Connect the drain hose to the sink plumbing system. ... Step 3: Fasten the hose into place. ... Step 4: Position the drain hose to sink. ... Step 1: Configure the Waste Pipe. ... Step 2: Attach Spigot Using Jubilee Clips.More items...
How do you fix a washer hose to the sink?
1:263:11Connecting to a Sink - Haier HLPW028AXW Top-Load Compact ...YouTubeStart of suggested clipEnd of suggested clipYou can use the provided zip ties that the hose will stay in place or. You can also use velcro tiesMoreYou can use the provided zip ties that the hose will stay in place or. You can also use velcro ties or something similar which are reusable but still have a solid grip.
How high can a GE washer pump water?
GE/Hotpoint/RCA Top Load, Front Load, and Unitized washers have powerful drain pumps that can pump water vertically as high as 8 feet above the floor. Spacemaker compact washers pump up (5) feet.
Do you need a check valve on a washer?
Provided the washer is installed compliant with the installation instructions, there should be no reason for needing check valves.
How To Install GE Washing Machine Drain Hose
Here’s how to replace the three drain hoses in your GE washing machine…
How To Install GE Washing Machine Main Drain Hose
To replace the main drain hose in your GE washing machine, here’s what you’ll need to do…
How To Install GE Washing Machine Drive Belt
To replace the drive belt in your GE top loader washing machine, here’s what you’ll need to do…
How high above the sink should the hose be?
If using a sink, attach a plastic hose guide to keep the hose bent downward and make sure the hose doesn't reach too high above the washer - 60 to 90 centimeters (23 to 35 inches) is ideal. Your washer might come with a plastic hose guide.
What is the water supply hose?
The water supply hose is what feeds water into your washing machine when you do laundry. If you have pipes that run to your washing machine's location you can simply attach the hoses here. Make sure to tighten your water connections snugly to prevent leaks from developing, but do not overtighten.
Why do you turn off the washer valve?
Switching off the valve when your washing machine isn't in use will help take some pressure off the hoses that connect the washer to your pipes. This may help preserve the hoses and reduce the chances of a leak.
What temperature should a washing machine be?
A level, hard-floor surface is an ideal location for a washing machine. Make sure the room temperature will not fall below 32 degrees Fahrenheit (0 degrees Celsius). The washer should also be away from sources of heat like your furnace, radiators, or fireplaces.
Can you use a drain pan under a washing machine?
One easy way to reduce the risk of this happening is to use a washing machine drain pan under your appliance. If your washing machine is located on a floor other than the basement, it is particularly recommended that you use a drain pan. Some buildings may even require that tenants use a pan.
Do you need a blanking cap on a hot water inlet?
If your machine has both hot and cold water inlets but you only have a cold water supply, you'll need to install a blanking cap on the hot water inlet. Otherwise water may leak out and cause damage to your home.
Can you feed a washer to a sink?
If your washer is located near a sink, you can feed the drain hose over the edge and into the sink. If you do not have a drain or sink basin near the washer, you may need to use a standpipe. Make sure the pipe is secured down or it may loosen over time, causing flooding.