Installing Correctly
- Measure for the height of the rod. Use a measuring tape. Determine where the top of the curtain will be from where...
- Mark where the brackets will go. ... Be careful not to get too close to the edge if installing in the casing, as...
- Add a mid brace if needed. Consider the length of the rod when hanging the brackets. Though most curtain...
How to install curtain rods without a drill?
You must first choose where to hang curtain rods and select the best type for your windows:
- Measure the width of your window frame. ...
- Decide whether you want your curtain rod to hang on the window frame or extend past it. ...
- Allow about 3 inches on each side of the window. ...
- Make a mark about four inches above your window for mounting hardware. ...
- For grommet curtains, you will need to take into account the placement of the grommet. ...
How much does it cost to install a curtain rod?
The national average materials cost to install a curtain rod is $18.14 per rod, with a range between $14.11 to $22.17. The total price for labor and materials per rod is $159.94, coming in between $81.88 to $238.00. A typical 6 rod project costs $959.66, with a range of $491.29 to $1,428.03.
How to install curtains rods?
“Whenever possible, go all the way up and hang your curtain rods about 2 to 3 inches under the crown molding or ceiling,” Contreras advises. “At minimum, hang the rods at least halfway between the top of the window frame and the ceiling.” Keep in mind that using tab-top panels or clip hooks will add a few inches to the length of your drapery.
How to hang curtains correctly the first time?
Part 3 Part 3 of 3: Adding Your Curtains Download Article
- Remove your rod to hang the curtains. Once you're certain that your brackets can hold your rod, remove it to attach your curtains.
- Add the curtains onto the rod. Some curtains are attached to the rod by curtain rings while others are threaded directly through the rod.
- Put the rod back into place. ...
What is the easiest way to install a curtain rod?
4:236:15A Trick For Hanging Curtain Rods Faster - YouTubeYouTubeStart of suggested clipEnd of suggested clipOut the drill bit for his screw head or Phillips screw had the first cup of my anchors in these areMoreOut the drill bit for his screw head or Phillips screw had the first cup of my anchors in these are the anchors that come with. The very satisfying I love doing anchors.
Where do you put the brackets for curtain rods?
Use a pencil to mark the drill holes for your brackets. Each bracket should be placed at the height you previously determined and about four to six inches from the side of the window frame. (This will allow you to open the curtains completely.)
What is the rule for hanging curtain rods?
A rule of thumb (from Architectural Digest) is that curtains should be hung between four to six inches above the window frame, so install your curtain rod accordingly. When you hang the curtain rod high, it will make the window appear taller.
How far should curtain rod extend past bracket?
Curtain rods should extend at least 3 to 6 inches past the window frame. Just as hanging curtains above the window frame makes the window appear taller, Bob Vila writes that extending the curtain rod past the window frame makes the window appear wider.
Do you need middle bracket on curtain rod?
Center Support Brackets If your curtains cover a lengthy window span, you'll need a functional support bracket in the center to prevent the rod from bowing. Most rods require support brackets every 30 to 36 inches. So if your window is longer than 60 inches across, you'll need two center support brackets.
How much space should be between finial and bracket?
Pole brackets should be fixed so there is room for at least one ring (or eyelet/tab) between the outside edge of the bracket and the finial. About 5cm (2”) is usually about right for rings.
How far should a curtain rod be from the wall?
When installing curtain rods, hang the rod so that it extends at least 3 or 4 inches beyond the window on each side. This allows your curtains to overlap both the window and the wall to prevent light from leaking in around the window's edges.
How far can a curtain rod span without support?
1 ⅜” Wooden rods and 1 ⅜” Designer Metals can go 60 inches without support. 2” Wood can go up to 96” and should have support brackets if high up. Wrought iron can go up to 96” without support but is heavy so support is safer. It's safe to support every splice and joint on a rod.
How to make sure a rod is level?
Check for level. Fit the rod onto the brackets and then use a carpenter's level to make sure that the rod is even . It should be, as long as you measured for level when marking the locations for brackets.
What is the best way to hang tab top curtains?
If hanging tab top curtains, a thin rod is best. A thick rod will draw the curtain up, making it hang too high.
What is cord curtain?
A cord allows you to pull the drapes open and closed. Panel curtains, eyelet curtains and tab top curtains are meant to hang from a plain round rod. They may have a pocket along the top to push the rod through, or the rod may be threaded through eyelets or tabs.
How far should a curtain end from the floor?
If you buy tab top curtains, make sure the curtain length doesn't include the length of the tabs. Floor length curtains end 1/2 inch (1.25 cm) from the floor unless you live in a humid environment, in which case they should end 1 inch (2.5 cm) from the floor, because they will stretch more on humid days.
How far should curtains be from the window sill?
Curtains that hang below the sill should extend 4 inches (10 cm) below the sill, long enough to cover the edge of the casing below the window. Sill-length curtains should skim the sill. 3. Consider how far you want to be able to draw back the curtains.
How far can a curtain draw back?
Bear in mind that the curtain will only draw back as far as the brackets holding the curtain rod, whether or not you have a return, and the style of the curtain will determine how much they can be compressed. The amount you can compress a curtain is called the stack back.
What to do if your drill goes in so far?
If your drill only goes in so far, you have one of two problems. The first possible issue is that your drill may not be up to the job, and the second issue is that you may be butting up against a steel or concrete lintel. You could test drill the wall ten inches higher and fix there if your test is successful, or you can establish what lintel you are trying to drill into. Steel will be magnetic on its upper and lower edges (H section) and sometimes over its whole face (box section); otherwise, it will be concrete. It is not good to drill into lintels because it weakens them. If you still want to do so, you will need either an SDS drill and bit for concrete or a high-speed steel drill bit for steel. (Neither of these will be easy to use.)
How much space do you need for curtain rods?
A general rule of thumb: For wall-mounted rods, allow at least one to three inches on each side of the window to accommodate an open curtain, or as much as six inches on each side of the frame if you’re trying to make the window appear larger. Don’t forget to factor in additional wall space for decorative finials.
Why do you need a curtain rod?
Beyond completing a room’s decor, however, a curtain rod possesses yet another secret power: the ability to disguise design defects. If your ceilings are too low, hang your rods higher.
How to measure drapery for a window?
1. Measure and mark at a spot above the window frame to indicate where the rod will go. The location of this mark depends on the window and your drapes. A mark at about 4 inches above the window is ideal for drapery that falls just below the sill. For drapery that falls to the floor, measure the drapery length, and add 1 inch to that measurement.
Why is it important to install drapery hardware?
Installing drapery hardware is intimidating because curtain rods usually have a lot of small parts in addition to the rod. While it seems like a lot of work, installing drapery hardware is a straightforward task you can complete by yourself ...
How far apart should you mount a center bracket?
When you’re covering a large window, center brackets should be mounted no more than 30 inches from each bracket.
How do double curtain rods work?
Double curtain rods allows you to hang two layers of curtains, giving a two-dimensional effect to your window dressing. Usually, the under layer is a lightweight, thin material that allows soft light into the room. The top layer is usually a thick, more decorative fabric. Two layers of curtains gives a lot of versatility to the room. From a design perspective, it allows you to add dimension to the room with two different textures and weights of fabric. It also allows you to control the amount of light in the room, and the amount of visibility you have through the windows. But, you don’t need to hire a professional to install them; this task can be mastered by even the most unhandy of homeowners in just 20 minutes.
Why are there two layers of curtains?
From a design perspective, it allows you to add dimension to the room with two different textures and weights of fabric. It also allows you to control the amount of light in the room, and the amount of visibility you have through the windows.
