DIY Glass Dry Erase Board
- Secure Your Materials. Basic Materials needed for this project are a piece of replacement windows glass, we bought 30"x36" from Home Depot.
- Tools Needed. The only tool you really need is a #2 Phillips screwdriver, but it is also nice to have a measuring tape, drill and matching drill bit.
- Installation. ...
- Mount and Enjoy. ...
How do I install a glass dry-erase board?
At Quartet, we make glass dry-erase board installation simple. All of our glass whiteboards come with a hardware kit and an instruction sheet to help you get started with the hanging process. You’ll need to supply a few common household tools, such as a screwdriver or drill, but all of the screws, anchors and washers will be supplied for you.
How do I install a glass whiteboard?
Place the Glass Whiteboard (Part A) against the wall in the desired installation location. Place a level on top of the board to confirm it is level. Use a pencil to mark an “x” in each mounting hole. Pro Tip - Only use a pencil when marking the holes. Read our helpful whiteboard installation tips to find out why.
How much does it cost to install a dry erase board?
Here is an inexpensive and extremely elegant looking Dry Erase white board for your home or office, only about 15 bucks! Super easy installation! Only 1 tool needed, a screwdriver! Enjoy! Basic Materials needed for this project are a piece of replacement windows glass, we bought 30"x36" from Home Depot.
How do I install a standoff cap on a glass whiteboard?
Lift glass whiteboard and align holes with the Standoffs (Part G) on your wall. For glass whiteboards 48" x 36" and smaller: Place a washer behind the glass board before screwing the metal standoff cap into the barrel. Once all washers are in place: Insert Standoff Caps (Part C) through the whiteboard and into the Barrels (Part G).
How do you attach a dry erase board?
Here's how to easily hang a whiteboard using screws:Check What Hanging System Your Board Uses. ... Pick a Place for Your Board. ... Mark Screw Holes. ... Drive in Self-Tapping Wall Anchors. ... Drive Screws Into Anchors. ... Hang Your Board. ... Choose the Position of Your Dry Erase Board. ... Mark Where the Top and Bottom of the Board Will Be.More items...
Are glass dry-erase boards better?
Glass boards are the ultimate in whiteboards. They outperform the competition in aesthetics and durability, although abrasive cleaners may scratch their surface. And they don't stain or ghost.
How do you install a whiteboard without nails?
You can hang whiteboard with industrial strength velcro. I buy the role at Home Depot that is rated to hold 10 lbs. Because it is attaching to the wall, there is not 10 lbs of weight actually on the velcro strips. I put them on every corner and one in the center top and bottom and left and right.
How do you anchor a whiteboard to the wall?
2:417:00How to Install a Whiteboard - US Markerboard - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo like I said your your best bet is to use holloway hollow wall anchors or toddlers or somethingMoreSo like I said your your best bet is to use holloway hollow wall anchors or toddlers or something that's you know heavy-duty that will go in through the wall and squeeze. Between the drywall.
Are glass whiteboards breakable?
Glass whiteboards are incredibly durable. Not only is the glass strong, but the standoffs that hold the board into place are also incredibly strong.
Do dry erase markers work on glass boards?
Windows have glass panes and glass on a non-porous surface. We all know that some markers are great for non-porous surfaces. So, you can indeed use dry erase markers on windows and even on glass sliding doors.
How do I hang a whiteboard without screws?
If you want to hang a whiteboard without nails, make sure you find a super sticky product. Generally, you'll want to use industrial strength velcro or Command strips to do this, as they hold weight pretty well.
Can I use Command strips to hang a whiteboard?
6:299:16How to Create a Dry Erase Board using 3M Command ProductsYouTubeStart of suggested clipEnd of suggested clipBut you know what it does feel really secure. So I can take confidence in that and you know if myMoreBut you know what it does feel really secure. So I can take confidence in that and you know if my children do get a little crazy and rip it off the wall I don't have to worry about the paint or
How do you hang a magnetic whiteboard without drilling?
0:191:52How to hang a magnetic whiteboard without hanging brackets - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo i thought hmm this is a magnetic white board and i have some magnetic tool strips from harborMoreSo i thought hmm this is a magnetic white board and i have some magnetic tool strips from harbor freight and i bet that the magnetic force might hold it on so i took. And you can get these for about
How do you hang a frameless whiteboard?
1:342:40Luxor WB Series Whiteboard Mounting Instructions - YouTubeYouTubeStart of suggested clipEnd of suggested clipStart with the middle lower bracket tap the top brackets down so they're touching the top of theMoreStart with the middle lower bracket tap the top brackets down so they're touching the top of the whiteboard attach the brackets to the wall port.
How do I make a whole wall into a whiteboard?
To make a whiteboard wall, you'll simply apply several generous coats of dry erase paint to your wall and let cure for 5 days. I always recommend freshening up the coat of paint already on your wall for the best results, but you can also apply this technique over wallpaper for an exciting visual twist.
How do you make a whiteboard magnetic wall?
0:448:35Make an Entire Wall a Dry Erase Magnetic Note Board! DIY ProjectYouTubeStart of suggested clipEnd of suggested clipCane. So I have this rust-oleum dry erase paint got it from my home center the two-part mixture CMoreCane. So I have this rust-oleum dry erase paint got it from my home center the two-part mixture C mix Part A with Part B and then work like a paint after.
What do you need to hang a glass whiteboard?
You’ll need to supply a few common household tools, such as a screwdriver or drill, but all of the screws, anchors and washers will be supplied for you. Simply unpack your board, organize your tools and you’re ready for installation.
Can a glass whiteboard be mounted horizontally?
Note: Some glass whiteboards can be mounted horizontally or vertically. Make sure your hardware kit has all of the included pieces. Gather all of your tools before you start. Follow the instructions and reference images for your specific board.
How many tools are needed to install a sandbox?
Super easy installation! Only 1 tool needed, a screwdriver!
What tool do you need to measure a hole?
The only tool you really need is a #2 Phillips screwdriver, but it is also nice to have a measuring tape, drill and matching drill bit. It will also be helpful to have another person around to help out with all the measuring, or "eye-balling"
Where is the accessories tray on a whiteboard?
Starting at an angle, press the Accessories Tray (Part B) up along the bottom of the glass whiteboard.
Where to place washers on a whiteboard?
Place Washers (Part D) on the threaded section of each metal Standoff Cap (Part C). Lift glass whiteboard and align holes with the Standoffs (Part G) on your wall.
What part of the whiteboard do you put standoff caps in?
Once all washers are in place: Insert Standoff Caps (Part C) through the whiteboard and into the Barrels (Part G).
How many people do you need to install a board?
Make sure you have enough people to install your board. We recommend 2 people for smaller boards and 3+ people for 72" x 48" and 96" x 48" boards .
Can you use a glass marker board?
You’re now ready to start using your glass marker board! Keep your thoughts organized and ideas flowing on the beautifully designed, frameless glass surface. Our Infinity boards are easy to erase, while our dry-erase markers help you create bold writing. If you have a magnetic glass board, hang up reference documents and reminders for easy viewing. Personalize the way you use your glass whiteboard to spark your creativity!
How long does it take to install a magnetic dry erase board?
Install them exactly where you want. Takes two people about 15 – 20 minutes. Required tools are a level, a drill, and a phillips screwdriver.
Can a clown install a glass whiteboard?
Glass Whiteboard Installation - So easy even a couple of clowns can do it!
Is Glass Whiteboard made in America?
In our new video, the incontrovertible evidence shows that YES, GlassWhiteboard.com’s magnetic glass whiteboard, designed, engineered, and manufactured in America, is as tough as they say.
