How to build a fireplace using an existing chimney?
- You will need to mix your mortar mix with water, making it the consistency of thick peanut butter. ...
- As you build up the walls of the chimney with bricks, make sure that it is level on all planes. ...
- For a prefabricated metal fireplace, the smoke chamber is almost indistinguishable from the rest of the chimney.
Do you need a chimney for a wood pellet stove?
Unlike a traditional wood-burning fireplace, a pellet stove does not require a chimney, but it does require a ventilation pipe. This means you can install a pellet stove without an existing fireplace setup or add a chimney.
Can you install a wood burning stove without a chimney?
Yes. You can install a wood burning stove in properties without a chimney. Stovax has designed a twin-wall flue pipe system – the Stovax Professional XQ™ range – which allows rooms without chimneys to enjoy the benefits of a wood burning stove. Click to see full answer.
How to install a wood pellet stove?
Pellet Stove Installation in 23 Steps. Set a fireproof pad onto the floor at the desired installation location. Place the pellet stove on top of the floor pad, making sure to maintain the proper clearances from combustible surfaces. Temporarily attach the vent pipe to the stove, then bore a ⅜-inch pilot hole through the exterior house wall.
Can a pellet stove use an existing chimney?
A: You can vent a pellet stove either through a wall or through an existing masonry chimney. If you're going through the wall, there's a through-wall fitting that's used to provide the proper clearance to combustibles, then the vent pipe is passed through that.
Can a pellet stove use the same chimney as a wood stove?
Each chimney flue may only service one solid fuel-burning appliance. No combination of fuel-gas, oil-fired, or additional wood, wood pellet, coal or corn stoves may be vented into the same chimney flue as a solid fuel-burning appliance.
Can I convert my fireplace to a pellet stove?
A pellet fireplace is formed of a firebox that uses pellets as fuel. This can be fitted either in a pre-existing fireplace or in a new construction. This means that converting a wood-burning fireplace into a pellet fireplace is very easy.
Can you put a freestanding pellet stove in a fireplace?
Pellet stoves can also be installed within a fireplace. As with other forms of fireplace or stove that are typically installed within fireplaces, pellet stoves fit in the opening of the existing fireplace and help to produce heat for a room more efficiently than what is possible using the original fireplace.
How high does a chimney need to be for a pellet stove?
The maximum height of the Pellet/Corn Chimney should not exceed 60 feet. A support is required at 30 feet.
Do you need a chimney liner with a pellet stove?
Pellet stoves do not necessarily need a chimney, but will need a form of flue to be installed to safely remove waste air from a home. A pellet stove can either be installed within an open fireplace and utilize an existing chimney with a flue liner, or can be vented out an external wall of a home.
How much does it cost to convert fireplace to pellet stove?
How Much Do Pellet Stoves and Inserts Cost? About $1,000 to $5,000 for a pellet stove or an insert, depending on style, size, and heat output, plus another $300 or so for the vent pipe or chimney liner.
How much does it cost to install a pellet stove insert?
Pellet stove inserts are easy to install with liners costs of around $300 and installation labor of about $1,000 to $2,000 for the liner and insert. With the insert, expect to pay between $3,000 and $8,000 for the unit fully installed.
Do pellet inserts need chimneys?
Do Electric Inserts Need a Chimney? Unlike wood-burning and direct vent systems, electric fireplaces do not need a chimney to vent combustible byproducts.
What kind of chimney does a pellet stove need?
Pellet stoves do not need a chimney. They require a way to vent the exhaust from the stove outdoors - but this can be done directly out of a nearby wall.
What is the best way to vent a pellet stove?
Pellet stoves can be vented vertically through the roof or horizontally through a side wall. It's always a good idea to get some vertical rise with the L-vent pipe, before venting horizontally through a side wall.
What do I put on the wall behind my pellet stove?
A fireback is a cast iron object that can be placed behind a stove to help protect a wall. Firebacks are also very decorative features that can help to enhance the look of your stove.
How far from the chimney should a pellet stove liner be?
It is important to note that your chimney liner must protrude at least 4 inches from the current chimney. In this prep time, you are also going to want to check your current chimney for any leaks. Unlike a regular fireplace, a pellet stove actually forces air through the chimney.
How efficient are pellet stoves?
Pellet fuel appliances, or pellet stoves, are heating devices that generate heat by burning compacted pellets. They are incredibly energy efficient and can save you money if replacing a traditional wood-burning stove. According to the EPA, they can be up to 83% efficient.
What is an insert stove?
An insert stove is what you are most likely to use if you are using an existing chimney and fireplace. They are fitted to go inside the hearth and will vent the exhaust up the chimney through the aforementioned chimney liner.
What is a good chimney liner?
Flexible Liner. This type of chimney liner is malleable and has ridges on the inside to help it bend. A flexible liner is a good choice if your chimney has a lot of twists and turns. Flexible liners are also quite a bit cheaper than rigid ones.
Do you need a chimney sweep to install a pellet stove?
Luckily, to install a pellet stove, you only need a Level One inspection. The others are for heavier-duty jobs. Inspections being done by a chimney sweep is handy because if you need extra cleaning, they can do it. Of course, it is cheaper if your flue is completely clean and they don’t have to do any extra work.
Can you put a pellet stove on the roof?
After getting the all-clear, you can install a chimney liner that runs from the stove to the roof. This will safely seal off the stove exhaust from the rest of the house. A pellet stove can be a great addition to your house if you are looking for a greener heating option. With a few modifications, you can get your existing chimney working with ...
Do you need a fireplace for a free standing pellet stove?
They must have enough room to stand on their own in front of the chimney or exhaust system. These are a good choice if you don’t already have a fireplace in your house.
Can a pellet stove be vented through a chimney?
4.3/5 (4,082 Views . 44 Votes) Yes, your pellet stove can be vented through your existing chimney, providing your pellet stove is placed in front of your existing fireplace and you have the proper clearance, the airspace between the stove, the walls and you meet the minimums as defined in the owner's manual. Click to see full answer.
Do pellet stoves need a chimney?
Installing a Pellet Stove Unlike wood stoves, pellet stoves do not require the same need for a full chimney system. They can be vented out through the wall or roof using special insulated double walled pellet piping. If venting into a masonry chimney, it's recommended to use a stainless steel liner. Subsequently, question is, can you vent ...
Can a stove be vented into a chimney?
These stoves can be vented into chimneys constructed of masonry or a factory-built metal system that's been designed, tested and listed for use with wood burning appliances; they can also connect to an existing fireplace chimney, if the height and position of the stove's flue collar permits it.
Can you vent a pellet stove through a fireplace?
Yes, your pellet stove can be vented through your existing chimney, providing your pellet stove is placed in front of your existing fireplace and you have the proper clearance, the airspace between the stove, the walls and you meet the minimums as defined in the owner's manual. Similar Asks.
Can you put a liner on a chimney after installing a stove?
In older installations, the liner sometimes only extended past the existing fireplace flue and part way up the chimney; this type of installation makes it difficult to clean the chimney after installing the stove. A better option is to install a liner that goes all the way from the stove's vent to the top of the chimney, ...
Can you vent a pellet stove through a chimney?
If you've got a new pellet stove and an existing masonry chimney, you can probably vent the stove through the chimney and save yourself the trouble of installing a through-the-wall vent. However, using a masonry chimney to vent the stove requires some preparation and some additional materials.
Determining Type of Installation For The Chimney
Preparing For The Chimney Installation
- If a horizontal direct ventilation is chosen, the installer will continue in the process by cutting a hole in the side of the home in order to attach the chimney vent and necessary hardware in order to set up the pellet stove chimney. If the vertical direct ventilation method is chosen the installer will need to cut a hole in the roof of the home in order to run the pellet stove's chimney stack up…
Installing The Chimney to The Vent and Pellet Stove
- With the type of ventilation chosen and set up, the next step in the process calls for the installer to hook up the chimney to the vent and vent hardware and then connect the chimney to the pellet stove. This almost completes the chimney installation process for the pellet stove and allows the installer to make necessary adjustments to the chimney ...