Add a drop of mild soap or a tsp of bleach to a clean jar filled with warm water. Detach the Bite Valve and straw from the cap. Drop the Bite Valve, straw and cap into the solution and tightly close the jar’s lid.
What was my first mistake when installing the bite valve?
My first mistake was to remove the blue part of the bite valve and try to put the cover in - that was wrong. You want to pull the "clear tube" part of the bite valve off (it looks like one piece but it's actually two).
Is the hyperflow bite valve compatible with the shutoff valve?
Compatible with our Shutoff valve, this molded bite valve cover is designed to fit the Hyperflow Bite Valve to keep it clean, insulated and ready to use. Video Player is loading. This is a modal window. How are ratings calculated? To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average.
How do you install a clear tube hose cover?
Instead you want to put the clear tube (that you pulled off) into the cover and make sure the clear tube goes ALL the way in and is flush with the "neck" part of the cover. Then you want to push those two pieces onto the hose (while pushing the clear tube into the cover so it doesn't ride up).
How do I change a Camelbak bite valve?
0:081:16How to Replace a Camelbak Bite Valve - Micro Advice Video SeriesYouTubeStart of suggested clipEnd of suggested clipSo you've got to roll it on so the first time you do it it can take a while. But as simple as thatMoreSo you've got to roll it on so the first time you do it it can take a while. But as simple as that and obviously with the rivets as well that holds it in the hose. As well nice and tight.
How do you use a hydration bite valve?
Bite the soft portion of the valve and suck at the same time - this will start the flow of water. The valve will remain sealed when not in use. Some models are equipped with a lock that you can engage to prevent accidental spilling which you can operate the shutoff by rotating the body of the valve 90 degrees.
How do you use a Camelbak bite valve?
To open it up, squeeze the bite valve and twist & roll between your fingertips (soaking the bite valve in tea temperature water beforehand may help). This should loosen the seal and open it up for drinking. If you're still experiencing problems, please request a new bite valve using our Warranty Claims form.
How do you use a Platypus Big Zip Evo?
0:002:29Platypus Big Zip Evo 1.5L Reservoir 2020 Review - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd pretty easy to clip in and then clip out you just push this button here and it comes out. ItMoreAnd pretty easy to clip in and then clip out you just push this button here and it comes out. It comes with a on and off valve that is pretty easy to use here it's not.
Where should a hydration bladder be placed?
1:0610:28Hydration Bladders for Dummies - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo generally the way a water bladder is going to work is that it's going to be in its own pocket inMoreSo generally the way a water bladder is going to work is that it's going to be in its own pocket in your pack. And then the hydration tube itself will run down the one of the sleeves of the pack.
Do I have to cut my CamelBak bite valve?
The clear thing is the CamelBak® Big Bite™ Valve. This patented feature provides easy drinking and spill- proof safety. Do NOT remove or cut this piece to drink. Simply bite it slightly and sip as you would out of a straw.
How do I stop my CamelBak from leaking?
0:170:54CamelBak Filling & Sealing the Crux® Reservoir | CamelHak - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you won't spill any water out of the reservoir. This cap unscrews just like a regular bottle topMoreAnd you won't spill any water out of the reservoir. This cap unscrews just like a regular bottle top it's got a nice wide opening. So you can fill it up really easy and then the most important part
What is the black stuff in my CamelBak?
Perhaps the most common cause of mold in a hydration reservoir is residual sugar from sports drinks. Mold loves to chow down on sugars, and any liquid you put into your reservoir seeps into every nook, cranny, hose, connector, and valve.
How do you put a CamelBak bottle back together?
1:442:37HOW TO Clean Camelbak Podium Water Bottle 2016 - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou could even poke something through there. And you can clean all in this space right here let's goMoreYou could even poke something through there. And you can clean all in this space right here let's go through reassembly. I take the silicone mouthpiece I hold it the exact same way get it in there
How do you use a Platypus bladder?
0:081:40How to use a Platypus GravityWorks 2L Water Filter to refill ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipStart by filling the dirty reservoir with the cleanest water you can find seal the reservoir andMoreStart by filling the dirty reservoir with the cleanest water you can find seal the reservoir and place it above your pack.
Is there a water bladder that doesn't taste like plastic?
If you're in the market for a new hydration bladder and looking to bypass the part where you have to clean it to get rid of the plastic taste, we recommend the Platypus Big Zip EVO (opens in new tab) which made our list of best hydration bladders and is guaranteed no-taste.
How do you clean a Platypus bladder?
Bladders from CamelBak, Osprey, Platypus, Gregory, and others are best cleaned by hand, using hot (not boiling) soapy water and a thorough rinse. You can use a tiny amount of dish soap or natural cleaners, like lemon juice, baking soda, or vinegar.
How do you use a hydration bladder?
Pour the solution into the bladder, shake it, and rinse as many times as necessary to make sure it's clean. Once you've managed to clean your water bladder after using the hydration backpack, make sure you hang it upside down for several hours so it's completely drained out.
How do you use Gregory 3d hydro bite valve?
0:441:57Gregory 3D Hydro Reservoir - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a nice wide mouth opening here you can just open that back up. And get your water from any.MoreUse a nice wide mouth opening here you can just open that back up. And get your water from any.
How do you open a hydration bladder?
To Open, pull Slider off, unfold opening and pull Flexgrips apart. Reverse steps to Close. Rinse thoroughly before first use. Make sure exit spout is sealed with Plug-N-Play Connector or a tube is connected.
How use Kuyou hydration pack?
You only pull up on the drinking mouthpiece, gently bite the mouthpiece with your front teeth to have a sip and start drinking, push back to stop water flow It conveniently quick to have a drink in cycling,hiking, camping.
Reviews
Keeps your bite valve clean and sanitary. Potentially prevents you from getting sick on the trail (as I did) when you're far from the trailhead.
Where to Buy
Help support this site by making your next gear purchase through one of the links above. Click a link, buy what you need, and the seller will contribute a portion of the purchase price to support Trailspace's independent gear reviews.
How to keep bite valve cover from sliding off?
If you have a magnetic clip (or a clip of any kind) on your drinking tube, make sure the clip stays above the cover's clip . This will help keep the cover taut on the bite valve and prevent the cover clip from slipping up and down the tube. See the attached photo for what I mean.
Does the cap on an osprey reservoir slip off?
The cap slips off from mouth piece. I have a 2.5 L day osprey reservoir. It fits fine but I wore it on a kayak outing and it kept slipping off.
Is the Osprey bite valve cover safe?
The Osprey Hydraulics bite valve cover helps give me peace of mind knowing that my bite valve is safe and clean every time I put my mouth on it.
Does the bite valve cover come with the osprey?
This bite valve cover does not come with the Osprey Hydraulics Sternum Strap and Tube Magnet Kit. It can be purchased via the link below.
Does the Sequoia pack have a bite valve?
Yes, this bite valve is compatible with the water reservoir included with the Sequoia pack.
Does this product have a magnet to hold in the strip if the backpack?
This bite valve cover does not come with the Osprey Hydraulics Sternum Strap and Tube Magnet Kit. It can be purchased via the link below.
Special offers and product promotions
Amazon Business: Make the most of your Amazon Business account with exclusive tools and savings. Login now
Product description
Compatible with our Shutoff valve, this molded bite valve cover is designed to fit the Hyperflow Bite Valve to keep it clean, insulated and ready to use.
What other items do customers buy after viewing this item?
Pages with related products. See and discover other items: dirt bike backpack, dirt bike backpacks
Special offers and product promotions
Amazon Business: Make the most of your Amazon Business account with exclusive tools and savings. Login now
Product description
Biting a dusty tube is one of the worst things that can happen on the trail, so ensure you have access to clean, clear water every time with the Platypus Bite Valve Cover. This cover adds practically no weight, securely protects your valve, and is easy to operate single-handedly.
Important information
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
More to consider from our brands
Pages with related products. See and discover other items: Enduro Hydration Packs
