In order to install the UV clarifier inline with your pond piping you will need to cut the piping and fit each end of the unit to either side of the pipe you cut so that after the job is done the UV clarifier essentially serves as a continuous part of your piping.
What are the maintenance requirements of a pond UV clarifier?
As a pond UV clarifier or pond UV sterilizer is used, the sleeve will tend to become caked with various types of gunk. This needs to be cleaned. If it is not kept clean, too little UV light will be allowed to penetrate the water and, thus, the algae will not be killed. Other than that, UV lights are fairly maintenance-free devices.
How do I install the UV clarifier?
When it comes to installation, place the UV clarifier where it won’t be flooded. It is waterproof, but should never be submerged in water. We suggest mounting it onto a dry flat surface, like the lid of the canister pond filter. And always connect the UV unit to a GFI outlet or circuit to protect against shock.
Should you place the UV pond light before or after the filter?
Should you place the uv pond light before or after the filter? - Quality Water Expert Should you place the uv pond light before or after the filter? As explained in this article, you need a mechanical filter to go along with the uv light. The uv light only kills the algae, and the filter removes the dead debris from the pond.
How does a UV sterilizer work in a pond?
As a UV sterilizer, it works in ponds of up to 6,000 gallons. You can also use it with your filter pump of up to 3,000-gph. The vortex flow rate design makes sure that all of the pond water gets hit by the UV lights. It also has a slim diameter, which exposes the entire thing to intense light to kill free-flowing algae.
Does a UV light go before or after the filter?
It is important to filter water before treatment with a UV light to make sure that all suspended particles are removed. UV light is not a filter so microorganisms and suspended matter will not be removed from the treated water.
Where does the UV go on a pond?
The water flowing through a pond uv should be forced through the unit under pressure. In a pump fed system this means the UV will be situated after the pump but before the pond filter. In a gravity fed filtration systems the pump is placed after the filter and the pond uv after the pump.
How long does UV clarifier take to work?
If installed correctly, Aqua Ultraviolet guarantees your green pond water will clear up in 3 to 5 days while using the device. Consider this piece of equipment if you want minimal pond maintenance, if you're suffering from murky green water or if your pond is subject to direct sunlight and warmer temperatures.
What size UV clarifier do I need for my pond?
There are no strict rules, but it's common to want to use a UV lamp of between 8-12W per 10,000 litres. If you have a particularly green pond or a pond more prone to algae and bacteria than usual, you can increase the wattage of the UV light to provide more clarification.
Where do you put a UV filter?
UV PROTECTION LENS FILTER DEFINITION A UV protection lens filter attaches to the front of a camera lens and reduces the amount of ultraviolet light that passes into a camera. This is especially important when shooting film photography. Film stock is more sensitive to UV light and can cause discoloration in photos.
How long should a UV light be on in a pond?
Provided this and that UV lights kill ALL bacteria, good and bad. We advise leaving the UV lights off for 2 days after applying our bacterial products to your pond in order to allow them to anchor onto something and begin to replicate to do their job.
How do you tell if UV clarifier is working?
0:491:50How to check if your UV light is on - YouTubeYouTubeStart of suggested clipEnd of suggested clipPut the little globe securely into the unit then plug the globe in and turn it on and then. DuringMorePut the little globe securely into the unit then plug the globe in and turn it on and then. During at night time. Often not during the day.
Are UV clarifiers good for ponds?
With the proper UV clarifier you can both prevent and eliminate unsightly green pond water. These little lights are powerful agents that allow pond owners everywhere to have crystal clear water and enjoy living the pond life to the fullest.
Do I need a UV clarifier for my pond?
By maintaining the right types of beneficial bacteria, you are able to keep a pond crystal clear without a UV light. In fact, we recommend you do not use a UV light with Nualgi Ponds. Through the experiences of our users, we have learned that the most modern and successful ponds have made the UV system obsolete.
Can you have too much UV in a pond?
You can't have too much UV in a pond because the UV device only affects algae cells that go through the unit. So plants and anything else not suspended in the water are not harmed. However, it's possible to have a device that's too small for the job but you can't have too much UV.
Where does a UV clarifier go?
When it comes to installation, place the UV clarifier where it won't be flooded. It is waterproof, but should never be submerged in water. We suggest mounting it onto a dry flat surface, like the lid of the canister pond filter. And always connect the UV unit to a GFI outlet or circuit to protect against shock.
What is the best UV light for a fish pond?
Best UV Pond Lights ReviewsTotalPond UV Pond Clarifier. The TotalPond UV is one of the most popular brands on the market and does a great job of keeping green water away. ... OASE Vitronic UV Pond Clarifier. ... Jebao UV Clarifier and Sterilizer. ... Pondmaster 02940 40-Watt UV Light. ... TetraPond Greenfree UV Clarifier.
Where do you put UV sterilizer in pond?
1:513:16The Pond Guy® Product Video - PowerUV™ UV Clarifier - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt should be placed outside of the pond where it can rest horizontally avoid areas that are prone toMoreIt should be placed outside of the pond where it can rest horizontally avoid areas that are prone to water puddles or areas where the unit can easily fall into the pond.
Where does a UV clarifier go?
When it comes to installation, place the UV clarifier where it won't be flooded. It is waterproof, but should never be submerged in water. We suggest mounting it onto a dry flat surface, like the lid of the canister pond filter. And always connect the UV unit to a GFI outlet or circuit to protect against shock.
Can you have too much UV in a pond?
You can't have too much UV in a pond because the UV device only affects algae cells that go through the unit. So plants and anything else not suspended in the water are not harmed. However, it's possible to have a device that's too small for the job but you can't have too much UV.
How do you connect a UV light to a pond?
3:1314:11Pond algae solution - UV light installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipHere. Now my the line for my pod is a two-inch line. So this is gonna be the main valve. And thenMoreHere. Now my the line for my pod is a two-inch line. So this is gonna be the main valve. And then these two are gonna go to the UV.
How does a UV filter work in a pond?
UV filters destroy algae by attacking it right at the DNA, rendering it unable to multiply and gradually turning turbid waters into crystal clear habitats for plants and fish .
What is a UV filter for ponds?
Pond UV filters are commonly marketed as clarifiers or sterilizers. The names do have some meaning. A clarifier of the same wattage as a sterilizer will not be as effective at eliminating algae from the water. There are many variables that make these devices work and the raw wattage is not always the best indicator of how effective the filter will prove.
Why is UV light harmful to algae?
Simply put, when algae contained in the pond water is exposed to the UV light, it is damaged to the point where the cell cannot divide and reproduce. This genetic damage slowly eliminates harmful algae from the water. These UV filters are among the slower-working types but they do produce excellent results given enough time.
What is UV pond light?
A UV pond light is actually very simple. There is a bulb which emits light in the ultraviolet, as well as the visible, spectrums. There is attached to this bulb a quartz sleeve that protects the bulb from the water and a ballast and housing in which the electrical components of the light are contained. There will generally be a spot on the ballast ...
What is a UV pond?
Remember that a pond UV device is an enhancement to one's pond filtration, not a means to total filtration in and of itself. One still needs to have plants, a basket filter, a good pump and, preferably, a biological filter installed to achieve the best results.
Why is UV filtration important?
When ultraviolet radiation is discussed, the subject is usually skin cancer and other maladies caused by the intense levels of this radiation found in sunlight. UV pond filtration, however, is one of the best resources available in the fight against pollutants such as algae. The reason this radiation is so powerful an ally in this fight is actually ...
Where is the filter located in a pond?
The filter will be fed by the pump's intake hose. This needs to be located as far as possible from the hose that returns the water to the pond. Having them next to one another causes a water current that essentially stirs the pollutants back into the water. Keep the intake away from features such as waterfalls and fountains, as well.
How to pick out a UV Clarifier for your pond
UV clarifiers can be purchased separately or as a part of a Filter/UV combo. If you already have a pond and a filter setup you’ll likely want a stand alone unit (unless you’re looking to also replace your filter). If you don’t have a filter yet the Filter/UV combo options are popular because of the all-in-one feature.
Installing a UV Clarifier
Most stand alone units are external inline units, meaning they get installed inline with your piping outside of the pond water. There are a few submersible uv lights for ponds as well.
When to Run UV
Once you have your unit installed we recommend keeping it running 24/7 with just a few exceptions.
What to Expect after Installation
On average, if everything is sized properly and you have adequate shade, most manufacturers state that you should see results about 7 days from the time you turn on your new UV.
UV Clarifiers for the Win
With the proper UV clarifier you can both prevent and eliminate unsightly green pond water. These little lights are powerful agents that allow pond owners everywhere to have crystal clear water and enjoy living the pond life to the fullest.
Aquascape UV clarifiers effectively clear unsightly green water algae blooms
Aquascape UV clarifiers effectively clear unsightly green water algae blooms.
Controlling Algae with UV Clarifiers
The Aquascape UltraKlear® UV Clarifier uses a technologically-advanced T5 high-output UVC bulb to eliminate green water. The UltraKlear UV Clarifier features a swirl sleeve which directs the water around the UV bulb, maximizing contact time and increasing UV efficiency up to 50% over traditional UV clarifiers.
What is UVC in a pond?
A UVC consists of a chamber that holds a UV lamp, there is an inlet that the pumped pond water enters, the pond water passes over the UV Lamp and exits via an outlet. The inlet and outlets usually come with stepped sizes for different sizes hoses.
What is UV Clarifier?
A UV Clarifier ( Ultra Violet Clarifier ) is fitted into your filter system to control and remove single cell algae giving you crystal clear water. It can be used as a stand alone unit or can be built in to your filter system.
How to tell if a pond is healthy?
The strange thing is, it’s a sign that your pond is healthy, single celled algae need light and nutrients to thrive, so if your pond has plenty of light and lots of nutrients its healthy, but it’s also the perfect breeding ground for the algae. A UV Clarifier ( Ultra Violet Clarifier ) is fitted into your filter system to control ...
Why is my pond green?
Green pond water can be a real problem, it’s caused by single cell algae (Chlorella Vulgaris) that once they start forming in your pond will multiply and spread really quickly , this can be paticularly bad in the spring and summer months.
How does a UV lamp work?
The UV lamp is protected by a quartz tube so the electrics don’t come into contact with any water and you often find a viewing window to check if the lamp is working so you don’t have to take it apart to check. They are available in various sizes to suit the size of your pond, each one being measured in watts which is the lamp size.
Can algae be filtered out?
Single cell algae are so small they can pass straight through a conventional filter system without being filtered out. However this is where the UVC comes into play, passing the single cell algae over the UV lamp disrupts their internal structure, destroying their ability to multiply and makes them clump together.
What is a UV pond clarifier?
TotalPond UV Pond Clarifier. The TotalPond UV is one of the most popular brands on the market and does a great job of keeping green water away. Use it in ponds that have 2,000 gallons of water or more. Plus, you can install it outside the pond or inside. It is designed to kill free-flowing algae without any chemicals.
How Long Does It Take for a UV Light to Clear a Pond?
When you have established the UV pond light, you can expect to see a difference within one week. However, your pond might not be algae-free for up to two weeks. From then on, the UV light for pond is going to help you achieve crystal clear water all the time.
What is the best way to control algae in a pond?
UV clarifiers will control the green pond water. You can also control algae based on how much shade you have on the area and ensure that there is at least 50 percent of plants in the water. Clarifiers are usually chosen when you don’t have any animals.
How many volts does a UV light bulb have?
The UV light is designed to destroy any water algae so that you get clearer water with little maintenance and effort. You get one 55-watt UV bulb that can supply between 220 and 240 volts of electricity .
Why do ponds have algae blooms?
If you notice a cloudiness to the water, it’s probably best to get a UV light for the pond. New ponds are more prone to algae blooms because the pond hasn’t matured yet, and this can take many years. Ultraviolet light work because the free-flowing algae pass through it and are exposed to excessively bright light.
How many gallons of water does a UV light sterilizer kill?
This 40-watt UV light is submersible in water and can kill other bacteria, as well. As a UV sterilizer, it works in ponds of up to 6,000 gallons. You can also use it with your filter pump of up to 3,000-gph. The vortex flow rate design makes sure that all of the pond water gets hit by the UV lights.
How does ultraviolet light work?
Ultraviolet light work because the free-flowing algae pass through it and are exposed to excessively bright light. That energy destroys the algae’s DNA, and it dies. Keeping your pond free of algae is the easiest way to enjoy a clear pond. Once the algae die, it all sticks together and gets filtered from the water.
What happens when you put UV light in a pond?
In a setting where the uv light is the last stage of the inline filtering process, the killed algae clump together and are then released into the pond. They might sink to the bottom, maybe in a spot where no pump can reach them. What’s not so good about this is that all this biomatter ends up being food for more microorganisms like algae.
What does a filter do before a UV light?
A filter before the light traps more sludge, thus slowing down the build up of sludge in the uv light casing.
Why do biological filters have UV light?
There are a couple of good reasons for this: The uv light works more efficiently when the water flowing along it is clearer. By filtering out big particles and debris helps, the light can penetrate deeper into the water, ...
Do you need a filter with a UV light?
As explained in this article, you need a mechanical filter to go along with the uv light. The uv light only kills the algae, and the filter removes the dead debris from the pond. And also explained there is that generally the best place the have the uv light is right AFTER the filter:
Can you put a mechanical filter before a UV clarifier?
But in the case when you don’t have such a bio-waterfall (and if your budget permits) it might be worth to place another mechanical filter before the uv clarifier as well.
Do you have to have a filter after UV?
There’s one type of situation that comes to mind where you cannot do this, where you have to have the filter after the uv. This is when you have a biological filter that spills right off a waterfall.
Can a pond pump suck up biomatter?
Whether or not this is a problem depends on the specific situation of your pond: for example, if you have rocks on the bottom that biomatter will have a hard time being sucked up by the pump, as opposed to a naked plastic liner where any debris is much more likely to be able to swept up.
