The good news is, Schlage makes this process quick and easy with just a few steps below. 1 Locate the pin tool that came with your lock. 2 Insert the tool into the small hole on the lever base and gently depress the retainer pin while pulling the lever away. 3 Remove and exchange both levers.
How to remove Schlage Lock Lever handles?
How to Remove Schlage Lock Lever Handles 1 Insert the key in the handle on the outside of the door. Turn the key 90 degrees so that it's oriented vertically in the reset position. 2 Insert the pin tool -- or a 6d finish nail -- in the hole at the other end of the handle barrel. 3 Pull the handle off. ... More items...
How do you mount a lever on a door knob?
If you're installing a lever, orient the lever just as you did with the outside housing, pointing away from the edge of the door. 7 With the screw holes in a vertical position, align the square in the back of the door knob or lever with the square spindle.
How do you put a key on a door lock?
After you've removed both handles, drop the key cylinder into the handle that now goes on the outside of the door and insert the key. Line up the hole on the barrel of the handle with the tab on the lock mechanism -- which is still attached to the door -- then slide the barrel onto the lock.
How do you remove the handle on a door lock?
Pull the handle off. Remove the key from the lock and remove the key cylinder from the handle barrel. Remove the handle from inside the door by inserting the removal tool or finish nail into the hole in the handle barrel and pushing on it while you pull off the handle.
How do you install a Schlage lever handle?
5:487:06How To Install Your Schlage F Series Handleset (F60/F62/F93) - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou should hear the levers snap securely into place gently pull on the lever to ensure it's secure.MoreYou should hear the levers snap securely into place gently pull on the lever to ensure it's secure. Now that your installation is complete let's test the lock.
How do you install a Schlage keypad lever?
2:166:41How To Install Your Schlage FE595 Keypad Entry Lock - YouTubeYouTubeStart of suggested clipEnd of suggested clipInto place insert the latch into the door. Make sure that the bevel edge of the lock faces the doorMoreInto place insert the latch into the door. Make sure that the bevel edge of the lock faces the door jamb. Use two 3/4 inch screws to secure the latch in place.
How do you change a Schlage door handle?
5:168:16Expert Tips on Schlage Lever Handle Removal - YouTubeYouTubeStart of suggested clipEnd of suggested clipDirection. Line up the hole in the lever with the lever catch on the spindle. Slide the lever ontoMoreDirection. Line up the hole in the lever with the lever catch on the spindle. Slide the lever onto the spindle. And push the lever inward until it slides over the lever catch and locks in place.
What is the correct way to install lever door handles?
0:282:48How to install a lever door handle: which way should paddles go?YouTubeStart of suggested clipEnd of suggested clipThe handle. So that it curves down. This is the natural way that this animal is supposed to look.MoreThe handle. So that it curves down. This is the natural way that this animal is supposed to look.
How do you install a Schlage Keyed door knob?
3:557:18How To Install Your Schlage Keyed Entry Lock - YouTubeYouTubeStart of suggested clipEnd of suggested clipTurn the thumb turn to the vertical position align the square on the back of the lever with theMoreTurn the thumb turn to the vertical position align the square on the back of the lever with the square spindle. Slide the lever into position and secure with the two finished screws provided.
How do you install a keypad door knob?
0:422:42How To Install A Keypad Door Lock - Ace Hardware - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's easy to do just insert the two ends. Together for the wire. Then slip the back of the deviceMoreIt's easy to do just insert the two ends. Together for the wire. Then slip the back of the device onto the door.
How do you remove a Schlage door handle without visible screws?
0:091:07How to Replace Door Knob With No Screw?! EASY! - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere's a little slot take your flat-head screwdriver. And just pop it off. Once you remove theMoreThere's a little slot take your flat-head screwdriver. And just pop it off. Once you remove the plate you'll have to take your drill and remove these two screws in the back to remove the handle.How to Replace Door Knob With No Screw?! EASY! - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you remove a Schlage door handle without visible screws?
How do you remove a lever door handle without visible screws?
Look for pin holes in the rose or in the lever body itself. Straighten a paper clip and insert it into the hole. Apply a bit of pressure to the paper clip to trigger a release button inside the hardware. Once triggered, the lever or lock trim can be removed from the door.How to Remove a Lever Door Handle Without Screws | Hunkerhttps://www.hunker.com › how-to-remove-a-lever-door-h...https://www.hunker.com › how-to-remove-a-lever-door-h...Search for: How do you remove a lever door handle without visible screws?
Are Schlage door handles interchangeable?
The new Schlage Custom Collection hardware line is designed with premium style and functionality in mind. This interchangeable system allows you to change hardware styles and designs in three easy steps without having to remove the inner core of the hardware.Schlage Custom Knobs, Levers, Deadbolts & Handsets - Buy Nowhttps://www.doorhardwarecenter.com › hardware-brandshttps://www.doorhardwarecenter.com › hardware-brandsSearch for: Are Schlage door handles interchangeable?
How do I fix my Schlage keypad lock?
0:5915:28[FIXED] Schlage Keypad Deadbolt Not Working in Cold Weather - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere's a hole in the center and it shows you there's a screw pretty deeply set in there you'll needMoreThere's a hole in the center and it shows you there's a screw pretty deeply set in there you'll need a long flat-head screwdriver.
How do you remove a Schlage keypad lock?
0:373:14How To Remove the Cylinder from Your Schlage BE365 Keypad ...YouTubeStart of suggested clipEnd of suggested clipNext remove the outside thumb turn and lift out the cylinder. Set the rest of the keypad assemblyMoreNext remove the outside thumb turn and lift out the cylinder. Set the rest of the keypad assembly aside for reinstallation. Now use a small flat-head screwdriver to remove the block.
The choice is yours
Find the perfect hardware for any door, just answer a few questions to find your fit.
Support made simple
Style, security, installation. Whatever question you might have, we’re here to help.
Why We Are Updating our Hardware
One project that we never got to? Making sure we had matching hardware throughout our house. We had a lot of mixed metals and styles going on and the inconsistency room to room was driving me mad! It looked inconsistent.
Of course, we are using Schlage!
In my last house, we had upgraded the hardware to Schlage because the contemporary designs brought that extra level of sophistication to the interior. Now that I know the quality and beauty of Schlage, I have been so excited to do the same with #savannahsmodernranchhouse!
We wanted a custom look – and that is what we got!
The amazing part about Schlage’s hardware is that it can all be customized – from the knob style to the color of the plate, I chose every detail that brought together this absolutely stunning look! The glass on the knobs is such a showstopper and I never knew I could feel that way about a door knob!
Installation was super easy!
We installed all of the hardware the same day! Schlage’s instructions make is very easy to install securely – anyone can do this! Here are the instructions we followed:
What does a Schlage handle look like?
Schlage lock lever handles have a slight curve in the middle that makes the handle resemble a smile or -- if inverted -- a frown. When the levers are installed correctly, they frown -- that is, the curve in the center of each handle faces up.
How to reset a door lock with a key?
After you've removed both handles, drop the key cylinder into the handle that now goes on the outside of the door and insert the key. Line up the hole on the barrel of the handle with the tab on the lock mechanism -- which is still attached to the door -- then slide the barrel onto the lock. Turn the key to the reset position and push the barrel until it snaps in place. Turn the key 90 degrees and remove it.
Can you change a lock on a left hand door?
If you have a lock installed on a right-hand door -- which is a door that swings open from right to left -- and you want to change it to a left-hand door, you need to exchange the handle on the outside of the door for the inside, and vice versa.
Can you replace the handle on a door?
Replace the handle on the inside of the door using the same procedure. The one difference is that you don't need to insert the key -- the barrel should simply snap into place.
