How to Make Two Levels of Hanging Rods in a Closet
- 1. Measure your closet's interior width by extending your measuring tape in a straight line between the closet's left and right walls. Measure along the back wall to keep your tape perpendicular to the side walls. ...
- 2. Cut your closet poles to fit the measured width. ...
- 3. Tap the interior walls or use a stud finder to locate the studs. ...
How to install wire shelves into a new closet?
Meet the Expert
- Buy Extra Pieces for Your Wire Closet System. ...
- White Wire Shelving: Closet Gauge vs. ...
- Installing Closet Shelves: Lay It Out With a Bubble Stick. ...
- Use a Template on the End Brackets. ...
- Lock Shelving in Place for Sturdy Wire Closet Racks. ...
- A Bolt Cutter Works Best for Trimming Wire Closet Racks. ...
- Space the Angle Brackets Evenly. ...
- Measure an Inch Short. ...
How long can a closet rod be without support?
Most of them include closet rods. If your closet rod is longer than 48 inches, you will need support. However, regardless of how long the closet rod is, if you’re hanging heavier items such as winter jackets, then you will want support no matter what.
How to install closet rods and shelving?
- Make sure all boards you attach are level before securing.
- Once level, drill a pilot hole in the 1×3 boards and through the wall (hitting the stud).
- Screw in place.
- Do this for all the shelf supports running the length and width of the closet
How do you build a custom closet?
- The basic building blocks of closet design include long-hang, double-hang, shelving, plus half & half.
- Long-hang and medium-hang sections should be no more than 36 inches wide and 63-65 inches tall.
- Double-hang or half and half sections should be no more than 42 inches wide.
What happens if you cut a closet rod too short?
How deep should a closet bar be?
How to measure a closet rod?
What are the different types of closet bars?
How tall should a rod be?
How to check for screws in studs?
Who is Lui Colmenares?
See 4 more
About this website
How do you attach two wood closet rods?
0:243:05The STRONGEST Connecting Closet Rods EVER! - YouTubeYouTubeStart of suggested clipEnd of suggested clipPiece you will put the threaded plug into that then you'll grab the other four foot. Piece. AndMorePiece you will put the threaded plug into that then you'll grab the other four foot. Piece. And thread it into that doesn't matter which side they're all threaded on both sides.
How can I add more hanging space to my closet?
0:2310:0525 Smart Ideas to Maximize Your Closet Storage Space - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne one simple way to create more space is to add small hooks to the walls. Both inside and outsideMoreOne one simple way to create more space is to add small hooks to the walls. Both inside and outside your closet.
How far can a closet rod span without support?
A wood closet rod can long for a maximum of 48 inches (4 feet) without support. If the wood closet rod is longer than 48 inches, it requires support.
How can I double my closet space?
Double Up on Hangers.Use Baby Hangers in Compact Spaces.Add Space Under Shelves.Make Use of Bare Walls.
How can I get more closet space without renovation?
Double Up. You need to dedicate only two-thirds of your closet to hanging rods. To maximize that space, mount two of them—one well above eye level for longer garments and one a little more than 3 feet off the ground for shorter (or foldable) ones.
How do I extend my closet opening?
Wearing safety goggles, cut and remove drywall in small sections in order to peek into the wall to check for obstructions. Use a reciprocating saw to cut any of the framing out of the way. Reframe the opening, using 2-by-4 studs on each side of the new opening. Make sure the new 2-by-4's are plumb and level.
How far apart should 2 closet rods be?
Two-tier hanging rod heights are not set in stone. If the measurements seem too high or low for you, adjust them accordingly. There must be 42 to 44 inches between the rods to allow adults' shorter clothing, such as shirts and pants folded over a hanger, to hang freely.
Does a closet rod have to go into a stud?
Drywall is thin and cannot hold the weight of a loaded closet rod on its own. The key to proper closet rod installation is using wall studs when possible to support your brackets.
How much weight can you put on a closet rod?
An average closet rod can hold 80 to 100lbs of weight. The exact load capacity depends on the material, wall thickness, and diameter.
What type of closet rod is the strongest?
Closet rods made from steel are chrome plated. In addition to being the strongest, they are also very resilient. Even after being overloaded they are likely to spring back to their original shape due to the resilient quality of steel. Stainless Steel is the next strongest material.
Does adding a closet to a room increase home value?
The short answer is yes, a custom closet can help with the resale value of your home with a higher return on your initial investment than other renovations. Adding a customized wardrobe to an empty spare room can make it feel like an extra bedroom, increasing the home's value.
How far from back wall should closet rod be?
If you don't leave sufficient space between the rod and the rear wall, one side of all garments will wrinkle from being bunched up against it. You can avoid this clothing disaster by mounting the rod at least 12 inches from the rear wall of the closet. Keep in mind that the average closet has a depth of 24 inches.
Can you make an existing closet bigger?
Regardless of the floor plan or the reason for wanting more space, one or both of the walls are moved to enlarge a closet. The job is easier if you have the help of an experienced home-improvement enthusiast who understands basic remodel construction.
What do you do when you don't have enough closet space?
10 ways to store clothes without a closetBuy or DIY a clothing rack (or a few) ... Hang your clothes and curtain them off. ... Use a utility shelf or bookshelf and add storage baskets. ... Turn a wall or corner into a built-in closet. ... Stack up some wooden crates or boxes. ... Hang unique wall hooks. ... Make room for a wardrobe.More items...•
How to Make Two Levels of Hanging Rods in a Closet
Hold each pole up so that its ends touch the height markers you made and use a level to make sure it is not crooked. Trace a circle around the points of contact on the wall.
Super Strong Clothes Hanging Bar for Your Closet, on a Budget
I had the idea for heavy pipe for a while, but never really had a reason to try it. We measured the closet at 131" tight, so the next step was to head out to a Home Improvement store and see what types of pipe they had available.
How tall should a closet pole be?
Folded hanging pants only require about 34 inches to hang freely, while shirts require 40.
How to attach wooden dowels to a wall?
Slide your wooden dowels into place on the support brackets. If you have adjustable poles, hold each one between its respective brackets and extend it until it fits tightly between the two walls.
How to measure closet width?
Measure your closet's interior width by extending your measuring tape in a straight line between the closet's left and right walls. Measure along the back wall to keep your tape perpendicular to the side walls. If you are installing poles within a divider, measure between the divider walls.
Where does Rob Callahan live?
Rob Callahan lives in Minneapolis, where he covers style, culture and the arts for Vita.MN and "l'étoile Magazine." His work has earned awards in the fields of journalism, social media and the arts. Callahan graduated from Saint Cloud State University in 2001 with a Bachelor's degree in philosophy.
Can you use a power saw to cut dowels?
You can use a hacksaw, power saw or table saw for cutting wooden dowels, or you can have them cut to length when you buy them. You can also avoid cutting wooden dowels altogether by using adjustable-length rods instead.
Why closets?
I have been getting my share of closet modifications lately. Last month I installed built-in’s, using IKEA Rast dressers. Now, it was time to tackle my daughter’s closet. This closet was simple: cleats, brackets, rods, and shelves.
How to increase storage in closet?
Adjusting the rods and shelves, or adding a second set of shelves/rods may be exactly what your closet needs to increase storage.
How long does it take for caulk to dry?
Fill all gaps along the edges with a paintable caulk. Let the caulk dry per package directions (about 30-60 minutes).
What can I use instead of screws?
Instead of screws, you could use nails and a hammer or a nail gun. I chose screws for easier removal if I chose to change the closet heights later on.
How to clean a sanded board?
Sand boards well and wipe with a microfiber cloth. Primer and paint will not adhere well to dust.
Is it hard to install closet shelves?
That’s all! Installing closet brackets, rods, shelves doesn’t have to be difficult. Closets are not as hard as they may look , especially if you are lucky enough to have a second set of hands. There is another closet how to tutorial post linked below.
Where to secure a shelf?
Secure the shelf in two places as indicated by the bracket holes. This will be on the underside of the shelf. You can do pilot holes, make sure the drill bit does not go all the way through the shelf.
Why do we need closet rods?
Installing a closet rod is a must have in any home as you will save a lot of space, by organizing your clothes in a professional manner. Generally speaking, on the market there are a lot of options when buying a closet rod, from the light products (designed to support a few cloths) up to the more complex wooden rods with heavy duty brackets ...
How to avoid damaging drill bit?
Smart Tip: Place the wooden brackets over a wood board when drilling the holes, as to avoid damaging the drill bit or the floor.
Where to install the other bracket on a closet rod?
Next, we have to install the other wooden bracket at the opposite end of the closet rod. Therefore, you have to cut the closet rod to the proper dimensions and use a spirit level mo mark the place where to install the other bracket. In addition, we have a project about how to install closet shelves.
Do you have to mark the opposite bracket to install a closet rod?
Consequently, you have to make sure the closet rod is perfectly level, making sure the wooden bracket is installed and to make a mark around it.
Can you drill holes in wood for closet rods?
In order to build the brackets for closet rod, we will need a good drill machinery with a hole saw bit, design for cutting holes in wood. We recommend you to avoid using hole saw bits made for cutting drywall or other materials, as they are dangerous for making holes in wood.
Can you attach sandpaper to a closet rod?
In addition, you can attach the sandpaper very easily to it, as to finish this step very quickly. Painting closet rod brackets. After you have finished the wooden brackets for the closet rod, you have to protect them by using paint or a coat of varnish, according to your tastes.
Can you secure a closet rod to drywall?
Make sure there is no space left between the wooden brackets and the drywall, otherwise the closet rod won’t be secured properly. Work with patience as to make sure you do a proper job.
What happens if you cut a closet rod too short?
If you accidentally cut the rod too short, it will be useless and you will have to purchase another one.
How deep should a closet bar be?
However, you also need enough room behind the closet rod for the hangers to clear the back wall. In most cases, having the bar 10 inches (25 cm) off of the back wall works well.
How to measure a closet rod?
Before you purchase your closet rod, you need to know how long it has to be. Every closet varies, so it's important to measure the width of your specific closet with a tape measure so you can purchase the correct length.
What are the different types of closet bars?
There are a wide variety of closet bars available at most home improvement and hardware stores. In general, you can choose between metal and wood. You will also have the option of getting a solid bar or one that is adjustable.
How tall should a rod be?
In general, it's a good idea to mount a single rod at 5 feet (1.5 m) tall. A double rod set up should have the bottom rod mounted at 3.5 feet (1.1 m) and the upper rod mounted at 7 feet (2.1 m). If there is a shelf above the rod, you should make sure the rod is at least 2 inches (5.1 cm) below the shelf.
How to check for screws in studs?
You can also run a strong magnet along the wall to look for screws or nails that are in studs.
Who is Lui Colmenares?
This article was co-authored by Lui Colmenares. Lui Colmenares is a handyman and licensed home improvement contractor for Mr. Handy NYC based in New York City, New York. Lui is trained and educated as an industrial engineer and specializes in carpentry, painting, and general handyman work such as mounting TVs, doorknob and deadbolt installation, furniture assembly, tile repair, and grouting. Mr. Handy NYC prides itself on quality work performed with speed, skill, and punctuality. This article has been viewed 68,675 times.
