how do you install a staggered cedar shake

How to Install Staggered Cedar Shake

1. Apply overlapping horizontal rows of building paper onto the shear wall, using a staple gun with 3/8-inch staples.
2. Start at the bottom of the wall at one end. Align the thick, lower edge of a cedar shake at the lower edge of the...
3. Repeat the installation procedure and complete the first row from end to end. Cut a...

Full Answer

How to use a staple gun to shear a wall?

How to prevent water intrusion on roof?

Can you stagger cedar shake siding?

Can you put cedar shakes on a wall?

About this website

How do you install staggered cedar shingles?

0:302:39How to Install Cedar Sidewall Shingles - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you lay in all of your shingles. Okay then there's going to be a gap then you lay in another rowMoreAnd you lay in all of your shingles. Okay then there's going to be a gap then you lay in another row angles covering the gap between the shingles below.

How do you stagger cedar siding?

2:227:01How to Install Cedar Shingle Siding | This Old House - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you want to be in about three quarters to one inch on each edge. And if the shingle is widerMoreAnd you want to be in about three quarters to one inch on each edge. And if the shingle is wider than let's say five inches one more in the middle.

How much do you overlap cedar shakes?

Begin Installation on Exterior Corner It should overlap the corner by about one inch. Use a small level to hold it plumb and attach with two nails or staples.

How do you attach cedar shakes?

0:514:30Applying Cedar Shingles - YouTubeYouTubeStart of suggested clipEnd of suggested clipPut two nails per shingle. About an inch and a half above.MorePut two nails per shingle. About an inch and a half above.

How do you install staggered shake siding?

1:414:34AZEK Shingle with PaintPro Technology- Staggered ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you're going to drop it down rip the starter course shingles to eight inches instead of nine nailMoreIf you're going to drop it down rip the starter course shingles to eight inches instead of nine nail a half inch above each key way with a coil siding the other or hand driven side and nails.

How do you stagger lap siding joints?

0:000:25Quick Tip: Staggered Clapboards - YouTubeYouTubeStart of suggested clipEnd of suggested clipEvery 16 inches we've chosen 16 inches because we nail directly into wall studs. Which are spaced 16MoreEvery 16 inches we've chosen 16 inches because we nail directly into wall studs. Which are spaced 16 inches on center this method.

Should you leave a gap between cedar shingles?

0:031:54Cedar shingle spacing (gapping) ? - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe spacing between cedar shingles are awful. Also the way I refer to is the gapping of the cedarMoreThe spacing between cedar shingles are awful. Also the way I refer to is the gapping of the cedar shingles how they're spaced and gap is in the top few of the most important things when it's stolen

How much gap do you need between cedar shingles?

1/16 to inchWhite cedar shingles should be spaced from 1/16 to inch apart depending on conditions — a 1/16 -inch gap would be appropriate for green shingles, which are prone to shrinkage, and a 1/4-inch gap for kiln-dried shingles installed in a moist environment.

Can you use roofing nails for cedar shakes?

Nail Sizes for Cedar Shingle Roofing Nails should be long enough to penetrate underlying materials in the cedar shingles at least 3/4 inches, or all the way through.

What nails do you use for cedar shakes?

The Cedar Shake & Shingle Bureau prefers the use of nails, however if you choose to use staples they must be stainless steel Type 316 in locations within fifteen (15) miles of salt water. For locations outside of the salt water zone - stainless steel staples Type 304 or Type 316 must be used.

Do you nail or staple shingles?

The type of fastener used to fasten the shingles is especially important in resisting wind uplift and pull-through. Fasteners for asphalt shingles should be roofing nails or staples. The head of a roofing nail or the crown of a staple is what actually holds a shingle in place.

What do I put under cedar shingles?

Felt Underlayment It is normally made from natural materials like wood cellulose but it can also be made from synthetic fibers like fiberglass. It is then coated with a protective coating made up of Asphalt which repels water, moisture, and debris that may have got past the cedar shingles or shakes.

Should you caulk between cedar siding?

NOTE: Generally, we do not recommend caulking butt-joints on cedar siding. Natural siding boards are designed to expand and contract with the elements and we do not want any adhesive to prevent their natural movement. We only caulk butt-joints on cedar siding if previously caulked.

Which side of cedar siding faces out?

rough side outFirst, install the siding with the rough side out. A smooth surface holds less finish and weathers much quicker than a rough-sawn surface. Finish the rough surface with two coats of a lightly-pigmented, semitransparent, oil-based stain.

How do you cut beveled cedar siding?

Cut a 1-foot piece of siding from one of the full-length pieces with a circular saw. Place the piece flat on the saw table, with the edge opposite the side to receive the bevel against the fence. Turn on the table saw and push the board through the blade using a push stick to keep your hands away from the blade.

How do you overlap wood siding?

2:365:03How to Install Engineered Wood Siding -- Buildipedia DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipDirections I'll cut the siding so that I have a 3/16 inch gap at butt-ends or against trim piecesMoreDirections I'll cut the siding so that I have a 3/16 inch gap at butt-ends or against trim pieces will come back and caulk this gap later with a high-quality caulk.

What is staggered cedar shake siding?

Staggered cedar shake siding has a long history and a well-rooted popularity across the country. If you have a home or setting that lends itself to this look, consider investing in fiber cement cedar look shingles, instead of wood to get the best of both worlds.

Why are staggered cedar shake shingles so popular?

It’s not the cost, difficult installation, or the ongoing maintenance that makes staggered cedar shake shingles so popular; it’s the look, appearance, and suggestion of a different era that appeals to so many. That’s why many homeowners that want the look, but without the expensive installation or the ongoing maintenance turn to fiber cement staggered cedar look shingles instead.

What is Cedar look shingles?

Cedar look shingles have the same texture, shape, and appearance as real wood shingles. Available in 28 different solid colors and stains, you can get the look that you want without the maintenance as well. Cedar look staggered shake siding is available in boards 48-inches long and 16-inches high. The boards install similarly to lap siding, ...

How many inches of shakes in a go?

Because you’re installing the shakes 48-inches in a go, however, the installation is much less time consuming and expensive, putting the look in the reach of more homeowners than ever before. And for those that truly want the look of actual shakes, rather than shingles, you can also get individual fiber cement shakes as well.

Why do people use cedar shake siding?

Cedar shake siding came about because people needed a fast and fairly inexpensive way to side their homes. Using long, milled boards in a lap style may have been the goal of many, but for some this was a look out of reach. In rural areas, long boards may have been difficult to procure or to deliver to the site of the home or building.

Can you use cedar shake siding on a Tudor home?

If you have a more rustic home, or a home in a more rural setting such as a chateau, lodge, or Tudor style home, you may want to forgo the lap siding and invest in shakes for your siding instead. Staggered cedar shake siding has a distinctively rustic appearance that fits in well with natural settings, giving your home the look and interest you’re after.

Is lap siding faster than wood siding?

And while newer, more accessible milling techniques have meant that it’s now easier and faster to have lap siding than it is to hand split a lot of wood planks, the look of staggered cedar shake siding is still something ...

How far past the corner of a golf course should you attach the starter piece?

Attach the very first starter course piece at the corner, make sure it runs past the corner by around 1-inch.

What to do before installing new siding?

Before you install the new sidings, make sure to smoothen those bumps or uneven woods.

How many layers of starter course shingles are there?

Starter course shingles are made of 2 layers. You will have to attach the second layer in a way so that it is offset from the underlying layer for at least 1-inch.

Why do you make a hole bigger in a shingle?

The reason why you should make the hole bigger is that the shingle will be safe from condensation.

Can you install cedar shake siding?

Don’t worry you have never done it before. Installing cedar shake siding is not at hard as you might be thinking. With the right instruction, anyone can do it well.

Is it hard to install siding?

I know it is hard to install sidings but if you learn to do it by yourself you can save a lot of money for sure.

Can you use swing stick to mark a layout?

Or you can use the swing stick method as well to gain a layout that is consistent. And then you would want to mark all the layouts around the home.

How to use a staple gun to shear a wall?

1. Apply overlapping horizontal rows of building paper onto the shear wall, using a staple gun with 3/8-inch staples. Each row overlaps the previous row 3 inches and wraps the corners of the wall 12 inches. Cut the paper at the edges of door or window openings with a utility knife.

How to prevent water intrusion on roof?

Install the second row of shakes in a staggered pattern. To do this, select shakes that are wide enough to span the seams between two shakes below , which provides prevention from water intrusion similar to shingles on a roof. Stagger a shake downward a maximum of 6 inches. Shakes can be staggered upward as far as the line of the nails in the first row. Use a pair of nails at each shake as before.

Can you stagger cedar shake siding?

According to Quick Trim System, you can also stagger vinyl cedar shake siding.

Can you put cedar shakes on a wall?

Cedar shakes install on the existing wood siding or a plywood shear wall. Depending on your preference, you can install the shakes on an entire wall or as a wainscot with traditional siding above. While there are no hard, fast rules regarding the staggered patterns, the shakes must be installed similar to roofing to prevent water intrusion at ...