how do you install cabinet valances

How to Install a Kitchen Cabinet Valance

Full Answer

Where do you put a valance between two cabinets?

Place a valance above a window between two cabinets. Related Articles. Some cabinetmakers install a valance on kitchen cabinets, typically over the sink or where two cabinets are separated by a window. The valance touches the ceiling, spanning the space between two cabinets. Valances usually have an aesthetic flair cut into the bottom edge.

How do you cut a window valance?

The object is to cut the valance off on both ends, keeping the center point of the valance in the center. Turn on the saw and cut off the valance on both ends. Hold the valance in place between the two cabinets. If it is too tight, trim off one end with the miter saw.

How to install kitchen cabinets?

How to Install Kitchen Cabinets 1 New Cabinetry. ... 2 Measure the Space. ... 3 Remove Existing Cabinetry. ... 4 Prepare for New Cabinetry. ... 5 Prior to Cabinet Installation. ... 6 Install Upper Cabinets. ... 7 Install Base Cabinets. ... 8 Floor Installation. ... 9 Install Base Cabinets. ... 10 Adjust Cabinet Hinges. ...

How do you mount a valance to a curtain rod?

Make sure the center of the rod is directly above the center of the window upon installing. The center of the rod will be where the center of the valance hangs. Mark the location for the first valance bracket. Place the first bracket for the valance outside of the curtain rod marking, about 1 inch (2.5 cm) from the curtain rod marking.

How do you attach a valance to a cabinet?

1:203:03Kitchen Cabinets: How to Install Light Rail/Valence - YouTubeYouTubeStart of suggested clipEnd of suggested clipUp apply a fast setting wood glue to the 45 degree cuts carefully move the pieces into placeMoreUp apply a fast setting wood glue to the 45 degree cuts carefully move the pieces into place creating your 90 degree corners. Use tape or clamps to hold the miters in place while the glue. Dries.

Do you need a valance for under cabinet lighting?

Using an under cabinet lighting valance or a concealment method is an optional and not mandatory. Some opt to have the lighting fixture exposed and forfeit the light valance for a more streamline look. Of course, you'll want to choose a sleeker lighting and have tidy wiring, as everything will be exposed.

What is a valance in cabinets?

Cabinet Valances are a universal way to accessorize any cabinetry arrangement or unique furniture design. Valances are an accessory that can add a hint of detail, small or large, varying with style and choice of application.

How do you install cabinet trim?

0:424:51Installing Crown Moulding the Easy Way on Cabinets - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd inch and a quarter screws. And i'm attaching the front one so it sits. Out one inch. So we'reMoreAnd inch and a quarter screws. And i'm attaching the front one so it sits. Out one inch. So we're bringing the crown molding past the full overlay doors and the sides are just flush.

What do you put on the bottom of kitchen cabinets?

Liners protect the bottoms of your kitchen cabinets from spills, dents and scratches, but a cabinet storage system also reduces the risk of damage. In deep cabinets, install sliding wire drawers to hold pots and pans. The drawers allow easy access to heavy cookware without dragging it across the floor of your cabinets.

What is kitchen light valance?

Light Valance is used to conceal under cabinet lighting and matches the door material. It can be installed flush with the back of the door, further back for handle-less cabinet access or excluded completely if under cabinet lighting is not used. Light Valances come in 96″ rips and will need to be cut down onsite.

What is a valance box?

The basic difference is that a curtain valance is just a short curtain, about a foot long, hung over the main curtain, at the top of the window. A box valance is solid, covered with fabric, as if the curtains were mounted directly into the box.

What Is a swag valance?

A valance is simply a term that represents a top window treatment. A swag is a part of a valance. It's a piece of fabric that's usually pleated or gathered to create a half-circle shape. Some swags can also be flat.

What are cabinet end panels?

What is an End Panel? The decorative piece of material that covers the exposed end of a base or wall cabinet is referred to as an end panel. There are two main reasons why you'd use an end panel: esthetics or if you're installing crown molding.

How do you attach decorative trim to cabinet doors?

0:050:46How to Install Moulding Trim on Kitchen Cabinet Doors - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake a thin piece of quarter. By half-inch trim molding mitered it into a square. And attach it toMoreTake a thin piece of quarter. By half-inch trim molding mitered it into a square. And attach it to the front of the cabinet door with pin nails and putty the holes.

How do you install cabinet top molding?

0:428:25How to Install Crown Molding on Kitchen Cabinets - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what you need to do is add a nailing cleat to it. You can choose to put the nailing cleat flushMoreSo what you need to do is add a nailing cleat to it. You can choose to put the nailing cleat flush with the face frame. Or better yet pull it out so the molding is flush with the doors.

What is the trim on top of cabinets called?

A decorative trim that sits at the top of the cabinet and provides a smooth transition from the cabinet to the ceiling is called crown molding. It comes in many shapes and sizes and adds detail that's pleasing to the eye and indicative of the homeowner's style.

How do you cover under cabinet lighting?

0:572:58Episode 54 - Conceal Under Cabinet Lighting - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo for both frame then frameless cabinetry. You could add a piece of molding underneath that createsMoreSo for both frame then frameless cabinetry. You could add a piece of molding underneath that creates a hollow space an additional hollow space underneath in frame situations. And in frameless cabinets

How do you hide puck light wires?

One of the simplest solutions to unsightly under-cabinet wires is using a cable protector. You can secure the wiring into one bundle with tie wraps and adhere it to the cabinet's underside with staples. The wiring length itself should extend directly from the light to the wall.

Step 1

Measure the distance between the cabinets on either side of the sink. Mark the valance accordingly. If the valance has a design with a center point, it will be necessary to divide the measurement by two and measure from the center point out to each end of the valance. Once the valance is marked, draw lines across the ends with the framing square.

Step 2

Place the cleats on a table. Measure from each edge just far enough to drill a countersink hole. Next, turn the cleat ¼-turn. Drill two more countersink holes. Be certain that they don't intersect.

Step 3

Place one of the cleats at the top of one of the cabinets directly behind the face frame. Secure it to the cabinet with the drywall screws through the countersink holes. Repeat this for the other cabinet.

Step 4

Place the valance between the cabinets and against the cleats. Secure the valance through the back of the cleat and into the valance with drywall screws. Be careful to not apply too much pressure on the drill as this can pull the cleat away from the cabinet.

How big should a valance be over a window?

A valance is a great way to add dimension and style to your windows. It usually hangs 4 to 6 inches (10 to 15 cm) over the curtains. You can hang a valance over blackout curtains to block out light in a room or put a valance over sheer curtains to keep the room bright and open. Start by measuring the window properly for the valance.

How to hang a valance on a rod?

Slide the valance onto its rod. Hold the valance in one hand and slide the rod through it. The valance should hang flat off the rod.

How to measure for second valance bracket?

Mark the location for the second valance bracket. Measure from the first marking to the other side of the window. Place the marking for the second bracket 1 inch (2.5 cm) outside of the curtain rod marking. The length between the two markings should be the same length as the valance you are using.

How to mark a valance bracket?

Place the first bracket for the valance outside of the curtain rod marking, about 1 inch (2.5 cm) from the curtain rod marking. Use a blue pen or pencil to mark the location. Mark the location for the second valance bracket.

How long should a curtain rod bracket be?

Check that the valance brackets are double the length of the curtain rod brackets. So if your curtain rod brackets are 2 inches (5.1 cm) long, make sure you use valance brackets that are 4 inches (10 cm) long. Mark the location for the first valance bracket.

How to remove wrinkles from valance?

If you notice any creases or wrinkles in the valance, run a clothing steamer over them to remove them. The valance should lay flat and even over the curtains so it can add style and detail to the window.

How to smooth out a valance?

Use a steamer to smooth out wrinkles on the valance. If you notice any creases or wrinkles in the valance, run a clothing steamer over them to remove them. The valance should lay flat and even over the curtains so it can add style and detail to the window.

New Cabinetry

When it’s time to update the look of your home, breathe life into your kitchen, garage, laundry room or closets with new cabinets. Installing kitchen cabinets may seem like a daunting project, but our three-part installation series shows you how to confidently prep, measure and install kitchen cabinets and transform your space.

Measure the Space

Before installing kitchen cabinets and to help create a plan for your new cabinetry, you need to measure the space. Measure the walls, doors and windows to the outside of the moulding. Other window measurements you need to take include: floor to windows, bottom to top of windows and top of windows to ceiling.

Remove Existing Cabinetry

If there are existing cabinets, you’ll need to remove them. Turn off the electrical, gas and plumbing/water supply lines to the kitchen. Remove the doors and drawers from your cabinets and then disconnect and remove your appliances. Remove the sink, countertop, moulding and toe kicks on the existing cabinetry.

Prepare for New Cabinetry

After your old cabinets are removed, prepare the area for your new cabinets. Repair the walls by patching and smoothing any holes. Next, apply a couple of coats of paint to the area.

Install Upper Cabinets

With your room prepped and guidelines marked, it's time to hang the kitchen wall cabinets. It’s best to install upper cabinets before the base cabinets go in. Follow the steps below to ensure an efficient and accurate wall cabinet installation. For additional tips, check out our video on How to Install Upper Cabinets.

Install Base Cabinets

Now that you’ve prepped, measured and installed the upper cabinets, installing the base cabinets will be easy.

Floor Installation

If you’re installing a new floor, this is the best time to do it so since you can run it under the cabinetry, unless you’re installing a floating floor. A floating floor should be installed after the cabinetry, but the cabinetry must be raised to a height just above the flooring. Otherwise, you'll have trouble installing appliances later.

What is a light valance?

This is a piece of matching straight material that gets cut and attached to the bottom of the cabinet using L-Brackets or Pin Nails from the inside. This type of light valance comes in many different heights, routing and design types. This is by far the most economical choice for your space.

Is concealment required for under cabinet lighting?

Using an under cabinet lighting valance or a concealment method is an optional and not mandatory. Some opt to have the lighting fixture exposed and forfeit the light valance for a more streamline look. Of course, you’ll want to choose a sleeker lighting and have tidy wiring, as everything will be exposed. Most homeowners would agree that under cabinet lighting is worth investing in.

Can you conceal under cabinet lights?

NO CONCEALMENT. Some homeowners prefer to have no under cabinet lighting concealment and don’t mind having the under cabinet light showing. In this case, it is recommended you select a light that has a finished appearance/housing, so it isn’t unsightly to look at.

Can you add a bottom light valance to cabinets?

It’s important to plan your preferred lighting concealment option in advance, so your cabinets can be built accordingly. Although it may seem easy to add a bottom light valance moulding afterwards, this is sometimes not possible due to Code Clearance Requirements.