If you measured for inside mount cellular shades, follow these simple installation steps:
- Position your mounting brackets 2 ½ inches in from each side of your window opening along the top of your window. Line up the front of each bracket so they are in even alignment.
- Use a pencil to mark the locations of the screws.
- Use a steel measuring tape or level tool to ensure the brackets are straight.
Full Answer
How do I install window blinds for my Windows?
There are some tips to install window Blinds:
- Measure your windows.
- Purchase your blinds according the measurements you made.
- Make your mounting marks.
- Open the bracket door and hold the end brackets in place.
- Mark where you will be drilling.
- Drill the holes for the screws.
- Snap the valance clips in place.
- Attach the valance.
How to install two blinds in one window?
- Measure the window in three places (top, middle, bottom), as shown in our measuring instructions.
- For two (2) separate blinds in one window, take the smallest width and divide it by 2. Then add 1/4" to the width of each blind. ...
- For three (3) blinds in one window, repeat the same steps. ...
How to install cordless faux wood window blinds?
If you measured for outside mount wood blinds, follow these simple installation steps:
- Position your blind on the wall surface or window trim. ...
- Align the side and bottom of your first mounting bracket along the inside of your pencil mark and fasten to the wall with screws. ...
- If you have a center support bracket, install it slightly off-center above a section of the head rail so it will not interfere with the operation of the blind cord.
How to measure and install window blinds?
If you’re interested in measuring for inside mount blinds, follow these steps:
- Measure the depth of your window frame, from the front of the opening to the glass. ...
- Measure the width of each window opening. ...
- Measure the height of your window opening in three places: left, center, and right. ...
- Order your blind width to the nearest 1/2", then deduct 1/2" from your measurements to account for mounting hardware. ...
Can I mount blinds on the vinyl window frame?
You should not screw directly into the frame of the vinyl window. This can compromise the functionality of the window and also void the warranty—not to mention, the vinyl frame isn't strong enough to hold the weight of the blinds.
Can you install blinds in a vinyl window?
If you have vinyl windows in the house, a question that is foremost in the minds of the homeowners is, can blinds be installed on vinyl windows? Yes, it is possible – blinds can be installed without damaging your vinyl window frames.
Can you drill into vinyl windows?
Vinyl, while lightweight, is an incredibly strong and durable material so drilling a few holes to hoist a set of blinds will be no different than drilling into a wooden component.
How do you put blinds on a PVC window?
Here are our simple steps on how to fit blinds to UPVC:Mark the place where you will fix your brackets.Perfectly align your brackets for a level blind.Drill screws into your UPVC window frame to secure the brackets.Clip your headrail into the brackets to complete your fit.
Can I screw into a plastic window frame?
The simple answer to whether you can drill holes in your uPVC window or door frames is yes. You can hang curtains or install window blinds that need to be fixed to your window frames using screw fittings.
Is it better to put blinds inside or outside of the window?
We recommend choosing an inside mount for 95% of our customers unless window depth or obstructions prevent them from doing so. Most inside mounts require a few inches of window depth to anchor the brackets on.
What screws to use on vinyl windows?
0:041:11GRK Vinyl Window Screw - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe grk vinyl window screw eliminates shims when installing vinyl windows. The vinyl window screw isMoreThe grk vinyl window screw eliminates shims when installing vinyl windows. The vinyl window screw is engineered for ease of use.
What fasteners to use on vinyl windows?
- Use either an exterior grade nail (roofing nail) or an exterior grade screw to secure the window.
Can you screw through vinyl?
A stainless steel screw is the very best, but also the most expensive. Vinyl coated screws are great too. In most cases you can purchase these in rather small quantities. No matter which screw you buy, make sure it is a Phillips head screw because they are the easiest to use.
How do you fit blinds to uPVC windows without drilling?
For no drill blinds for uPVC windows, the best way to fit the blinds is to have an adhesive tape on the top of the blinds where you can peel back the strip and then firmly press the blinds into the window frame. This will eliminate the need to use any kind of screw or bracket to keep the blinds up.
Can you mount blinds to window casing?
0:101:25Inside Mount or Outside Mount? How to Choose Your Window Covering ...YouTubeStart of suggested clipEnd of suggested clipThis type of Mount is by far the most common choice and is highly recommended. An outside mount isMoreThis type of Mount is by far the most common choice and is highly recommended. An outside mount is when the blind is mounted up above the window on the wall. Or window trim.
What are click fit blinds?
What are Clic Fit Blinds? Clic Fit blinds are a drill-free, screw-free way of fitting blinds to a uPVC or aluminium window or door. Available in Pleated and Venetian types, Clic Fit blinds use small brackets that slide under the window beading/seal.
Is vinyl good for blinds?
If you are looking for a durable and hardy window treatment then vinyl blinds are among the best. A synthetic material that it is, vinyl is low maintenance. They are easy to clean and a little vacuuming or cleaning at intervals is all that is needed to keep them functional and in good shape.
How do you fill holes in PVC window frames?
White silicon may work to plug the holes but if you use it make sure to get the surface finish the way you want it before the stuff dries. It is not a material that will sand very well after the fact. You may also want to try a bathroom tub and sink sealer product.
How deep does a window need to be for inside mount blinds?
3⁄4"3⁄4" is the minimum depth required for inside mount blinds.
Can I drill into window frame?
When drilling into any window frame, you should always be as careful as possible. Avoid using the drill at full power, and prior to starting, you should make use of a metal detecting tool to ensure that you do not drill into an area where there are locking system or hinge components.
Why do we need vinyl windows?
Vinyl window frames also provide an excellent seal and stand up well to the elements over time , which is why getting vinyl windows is one of the energy-efficient ways to cut costs this summer . You can also further improve the thermal performance of vinyl-framed windows with extra insulation.
What are the pros and cons of vinyl windows?
The Pros and Cons of Vinyl Windows. There are three main types of window frames: vinyl, aluminum, and wood. Vinyl is, by far, the cheapest of the three options—a major contributing factor to their popularity. Vinyl window frames also provide an excellent seal and stand up well to the elements over time, which is why getting vinyl windows is one ...
Can you inside mount blinds after replacing windows?
If you are considering a window replacement and want to inside mount the blinds afterward, it’s important to take careful measurements to ensure everything will fit with the new vinyl windows. (If you’re not sure how, check out our guide that explains how to measure for blinds .)
Is vinyl window frame good for heat?
Because of this durability, vinyl window frames are very low-maintenance and resist extreme heat, moisture, or freezing temperatures. However, vinyl window frames do have some drawbacks. For one, they are often a bit clunkier than the frames made of wood or aluminum.
Can you screw vinyl blinds into a window?
You should not screw directly into the frame of the vinyl window. This can compromise the functionality of the window and also void the warranty—not to mention, the vinyl frame isn’t strong enough to hold the weight of the blinds. Instead, you should attach the brackets to the top and sides of the inside opening;
Can you hang blinds on vinyl windows?
Vinyl windows are one of the most popular and affordable window options, but they do present some limitation when it comes to hanging blinds. Here’s what you need to know about the pros and cons of vinyl windows and how to install inside mount blinds on vinyl windows.
Can you paint over vinyl blinds?
They also can’t be painted over, so you’re stuck with the initial color. Finally, vinyl window frames can make it tricky to install inside mount blinds because the vinyl isn’t strong enough to directly support the weight of the blind. If you are considering a window replacement and want to inside mount the blinds afterward, ...
How to Hang Blinds on Vinyl Windows
Vinyl windows are getting mainstream as property holders need new effective windows for their homes while remaining on a financial plan. Draping blinds for covering vinyl windows are the same as balancing blinds for covering windows with some other structure material (metal, wood.
How to Install Blinds
Rather than wasting your money getting blinds installed, why not do it yourself? With the right tools and a little spare time, your new blinds will be up and running in no time.
How to Install Blinds Outside Window Frame
Installing blinds outside is a very easy process, especially if you are outside mounting them. Your blinds should already come with all the hardware you need to install them, though you will also want some basic tools (drill, tape measure, pencil, level) on hand.
Last Words
We trust you have taken in a great deal concerning this article concerning the best way on how to hang blinds on vinyl windows, installation of blinds, recommended tools used to hang blinds on a vinyl window, and other vital subtopics discussed in the articles.
How to install cellular shades inside mount?
If you measured for inside mount cellular shades, follow these simple installation steps: Position your mounting brackets 2 ½ inches in from each side of your window opening along the top of your window. Line up the front of each bracket so they are in even alignment. Use a pencil to mark the locations of the screws.
How to lower shade cord?
Test your new shades. To lower your shade, pull the cord towards the center of the shade. To raise or lock the shade in place, pull the cord to the right.
How to align a pencil line?
Align the top of the left bracket along the inside of your pencil line and fasten with your supplied screws. Repeat this process for the right bracket.
Installation for an Inside Mount
Cellular shades are easy to install for an inside mount. A screwdriver is all you need to install your shades, or, for an easier installation, you can use a cordless screwdriver or a drill with a 1/4-inch Hex head drill bit.
Installation for an Outside Mount
Cellular shades are easy to install for an outside mount. A screwdriver is all that is needed to install your shades, or, for an easier installation, you can use a cordless screwdriver or a drill with a 1/4-inch Hex head drill bit.
How much does a vinyl blind cost?
Vinyl blinds are the most economical, ranging from $15 for light-gauge vinyl for a small window to more than $100 for larger sizes or heavier-gauge vinyl.
What are vertical blinds made of?
Blinds are made from “hard” materials, such as vinyl or wood, as opposed to shades, which are constructed from fabric. Horizontal blinds feature individual slats, while vertical blinds have “vanes,” the term for slats that hang vertically. Horizontal or vertical blinds can be a stand-alone window treatment or paired with curtains for a softer effect.
Why do horizontal blinds sag?
They’re less desirable on expansive windows where the wider span can cause blinds to sag in the middle. Horizontal blinds feature individual slats that overlap when the blind is fully closed.
How wide are retro style blinds?
Horizontal blinds can also be raised or lowered as desired. Mini blind slats are approximately ½ inches wide, while retro-style slats can be up to 3 inches wide. You can go as wide as you like, even with blinds installed inside the window frame as long as the slats fit without protruding past the frame.
What is the best way to clean blinds?
Swipe all blinds periodically with a microfiber duster or a blind-dusting tool designed with “fingers” that fits between individual slats.
How much do faux wood blinds cost?
Prices range from $35 to more than $200, depending on window size and wood type. Faux wood blinds, made from PVC or a composite material, closely mimic the real thing, but they resist humidity better than wood, making them a smart choice for steamy bathrooms. Prices range from $15 to $100+.
How to measure for outside mount blinds?
MEASURING FOR OUTSIDE-MOUNT BLINDS: Measure the width of the window at the top, from outside edge to outside edge, and then add 3 inches. Measure the length of the window in the center and add another 3 inches. The extra inches are necessary to ensure sufficient light blockage and privacy around the edges of the blind.
