Install Hidden or European Cabinet Hinges
- Mark the Door. Mark the place on the door where the hinge cup will be installed by using a combination square to make a horizontal line that is 3.5 ...
- Drill the Cup Holes. Place your hinge on one edge of the line you drew and adjust it to make sure you are installing the hinge at the right ...
- Install the Hinge Cups on the Door. Hinge cups are the convex part of the concealed hinge that goes inside the bored holes you just made on the door.
- Mark the Cabinet. Shim the door against the cabinet and measure the small gap between the cabinet door and the cabinet surface.
- Install the Mounting Plate on the Cabinet. Separate the mounting plate from your hinge, place it on the intersection of the two lines you drew, and drill it into ...
- Mount the Door. Hold the door in the open position, bring it close to the cabinet, and align the hinge with the mounting place.
How do you adjust European cabinet hinges?
How to Adjust Euro Style Cabinet Hinges
- Method 1 Method 1 of 3: Checking the Position of the Doors. Close the cabinet doors and look at their positioning. ...
- Method 2 Method 2 of 3: Repositioning a Standard Euro-Style Cabinet Door. Use the upper and lower screws to move the door vertically. ...
- Method 3 Method 3 of 3: Adjusting a Door with a Soft-Close Hinge. ...
How to install cabinet hinge without "jig"?
Install cabinet pulls without using a jig by imagining that your cabinet is divided into four quarters and placing the knob in between the middle two. Alternatively, cut the exact size of your cabinet or drawer face from a piece of cardboard.
How to adjust Euro style cabinet hinges?
Method 2 Method 2 of 3: Repositioning a Standard Euro-Style Cabinet Door
- Use the upper and lower screws to move the door vertically. Each hinge has a pair of screws oriented vertically.
- Adjust the rear screw if you need to move the door in or out. The screw responsible for in and out adjustments is furthest from the door.
- Turn the innermost screw to shift the door horizontally. ...
How to install self closing cabinet hinges?
- Fill the old holes with wood filler. (My screw holes were less than 1/8″ but for anything larger, I would use this process instead of wood filler.)
- Mark the new holes in the right place with a pencil.
- Drill a pilot hole for each one. ...
- Hold the door in place and attach the hinges using the new holes.
How do you install hinges on a euro door?
4:295:51How To Easily Install Euro Cabinet Door Hinges | Woodbrew - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut basically all I'm gonna do is place them over those holes and screw them in with the providedMoreBut basically all I'm gonna do is place them over those holes and screw them in with the provided screws. I've got both the hinges installed. And now it's just as easy as opening those hinges up.
How do you install a compact European hinge?
1:064:20How to Install Blum Compact 38 & 39 Cabinet Hinges - Cabinetparts.comYouTubeStart of suggested clipEnd of suggested clipUse your straight edge to properly align the hinges. Use your VIX pit and pre-drill your screw.MoreUse your straight edge to properly align the hinges. Use your VIX pit and pre-drill your screw. Holes. And now you can use your number 6 by 5/8 inch screws to attach the hinges to the. Door.
How do you install Blum European hinges?
1:212:14How to install Blum Hinges On New Cabinet Doors - Cabinetdoors.comYouTubeStart of suggested clipEnd of suggested clipOnce the hinge base is fitted into the hinge cup simply rotate the hinge until the indentations dropMoreOnce the hinge base is fitted into the hinge cup simply rotate the hinge until the indentations drop into the small alignment holes then push the locking flange down.
How do European door hinges work?
1:208:26Euro Hinges Explained - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll the Euro hinges use the same system. So it's a 35 millimeter cup and in a hole that's drilledMoreAll the Euro hinges use the same system. So it's a 35 millimeter cup and in a hole that's drilled for each screw. So that side of the door side is always the same what's.
How do you fix European hinges?
6:009:52How to fix bad Euro-style hinges [video 410] - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe best way i've found to fit these is to keep the hinge. And hinge plate complete. And simplyMoreThe best way i've found to fit these is to keep the hinge. And hinge plate complete. And simply unscrew the whole assembly from the carcass.
How do you install European cabinets?
2:243:31Installing European-Style Kitchen Cabinets - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe middle one just floats attached to the two end cabinets. So there's nowhere for them to go allMoreThe middle one just floats attached to the two end cabinets. So there's nowhere for them to go all right nope boy that's the beauty of it well how about putting the doors. And the drawers in place.
Where do you drill holes for Blum hinges?
1. To locate center of hinge cup on back side of door, measure over from edge of door 22.5mm (7/8 ). Here drill a 35mm (13¼8 ) diameter by 13mm (1/2 ) deep hole. 2.
What is the boring distance for Blum hinges?
Blum recommends 3mm-6mm (1/8"-1/4") boring distance for the 125 degree. They recommend 3mm-8mm (1/8"-5/16") for the 170 degree hinge. With the face frame mounting plate, the most overlay you are going to get is 19mm (3/4"), but you will likely end up with slightly less.
How do you install full overlay Blum hinges?
0:423:04How To Install Blum Hinges & Hang Your New Cabinet Doors Part 1YouTubeStart of suggested clipEnd of suggested clipThis rocker will lock the other end of the mounting plate into the hinge. Now. We will slide theMoreThis rocker will lock the other end of the mounting plate into the hinge. Now. We will slide the mounting plate into the hinge and rotate it down towards the rocker latch.
How do you align cabinet doors with European hinges?
0:542:47Cabinet Hinge Adjustments | European Cabinet Hinges - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd bottom on the inside mount these are two parts of the hinge one on the door side one on theMoreAnd bottom on the inside mount these are two parts of the hinge one on the door side one on the cabinet. Side if you were going to be working just with the cabinet side of the hinges.
Are European hinges universal?
Because of its universal fit, you can easily replace an existing Euro hinge with a soft-close hinge.
How do you adjust European hinges that won't close?
0:071:36How To Adjust European Cabinet Hinges That Will Not Stay ClosedYouTubeStart of suggested clipEnd of suggested clipIf you got a set of hinges that just isn't staying closed you can see this is just bouncing backMoreIf you got a set of hinges that just isn't staying closed you can see this is just bouncing back well you can try is to loosen the back set screw back right here down in the corner right here.
How do you install concealed hinges?
6:289:53Installing Concealed Cabinet Door Hinges & Handles {The Easy Way!}YouTubeStart of suggested clipEnd of suggested clipSo there's a little screw in there that will actually move the hinge. Or move the door rather in orMoreSo there's a little screw in there that will actually move the hinge. Or move the door rather in or out away from the cabinet or in or out away from this wall. So you can line up all of your reveals.
How do you install concealed hinges on a face frame?
5:1111:17UPGRADE!! How to Measure & Install Concealed Overlay SOFT CLOSE ...YouTubeStart of suggested clipEnd of suggested clipSo before you take your hinges off to replace them you're going to want to take a pencil and markMoreSo before you take your hinges off to replace them you're going to want to take a pencil and mark where your hinges. Sit. So i just like to mark. Right underneath of both hinges.
How do you install Rockler inset hinges?
0:392:10Rockler Hinges - YouTubeYouTubeStart of suggested clipEnd of suggested clipNext you want to locate the hinge mounting plate on the inside edge of the cabinet face frame. YouMoreNext you want to locate the hinge mounting plate on the inside edge of the cabinet face frame. You then want to screw the plate on to the face frame and clip the hinge arm on to your mounting.
How do you install overlay hinges?
0:257:32How to install concealed overlay hinges - YouTubeYouTubeStart of suggested clipEnd of suggested clipThey basically all sent the cup size of the overlays are pretty much all standard I think it's oneMoreThey basically all sent the cup size of the overlays are pretty much all standard I think it's one in 3/8 all right so the way I'm gonna do this is you can you can see that there's already holes. Here
How to align a hinge?
Press the hinge cups into the holes. Position a rafter square, as shown, to keep the hinge aligned.
How to find the right hinge for my door?
To find the hinge that will work with your door type, consult the hinge company’s online brochures and customer service line. Then, with the right hinges in hand, follow the steps below to install them.
How to drill a hole for a hinge cup?
To drill the flat-bottomed hole for the cup, you'll need a 35-millimeter Forstner bit. Mark a depth line ½ inch up the side of the bit, position it on the center point, and bore into the door until you hit the line. Blow out the shavings and test-fit the cup to make sure the hinge flanges touch the door surface .
Where do you mark the center of the hinge cup?
Then make marks across this line 3½ inches from the top and bottom edges, as shown. The point where the lines intersect marks the center of the hole for the hinge cup, the part that recesses into the door.
Can you use concealed hinges on frameless cabinets?
Concealed hinges can go in face-frame or frameless cabinets and on any door type—including full overlay, partial overlay, or inset—as long as the doors are at least ½ inch thick. The hinges I’m using are for frameless cabinets with inset doors.
How to find hinges on a cabinet?
Typically hinges are placed three or four inches in from the top and bottom ends of the doors. Draw a perpendicular line across the door stile to mark the center of each hinge.
What is a Euro hinge?
All Euro-style hinges include a round metal cup that mortises into a shallow hole in the back of the cabinet door. A baseplate, which is either an integral part of the cup arm or installed separately, attaches to the cabinet carcass or face frame.
Can you adjust Euro hinges?
Once in place, Euro-style hinges also allow for some helpful adjustments that other hinge styles don't. Depending on the specific hinge, you can adjust your cabinet doors up and down, side to side and in and out by turning a couple of screws.
Can you use Euro hinges on cabinet doors?
Euro-style hinges may seem complicated until you try them for the first time. Then you'll see how easy they are to install… and why so many production shops use them exclusively for hanging cabinet doors. Once in place, Euro-style hinges also allow for some helpful adjustments that other hinge styles don't. Depending on the specific hinge, you can ...
How to make sure cabinet hinges are even?
Once you’ve decided on the placement of the hinges, make sure they’re all evenly spaced apart from each other as well as the top and bottom edge of the cabinet. Use a ruler or tape measure to check the spacing to make sure they’re even.
What is a traditional hinge?
Choose a traditional hinge to add a stylistic detail to your cabinets. Traditional hinges are mounted to the surface of the cabinet door and are visible, or partially visible when the door is closed. They’re easier to install than concealed hinges and they can add a decorative effect to your cabinet door.
How to drive a drill bit into a door?
Apply pressure against the drill to drive the bit into the door.
How to measure gap between cabinet door and cabinet?
The cabinet door must be positioned correctly so it’s level and will open and close properly. Shim the door against the cabinet and use a ruler or tape measure to measure the small gap between the cabinet door and the cabinet surface.
How to measure the width of a cabinet door?
Measure and mark 3.5 inches (8.9 cm) from the top and bottom edge. Use a ruler, tape measure, or combination square to measure the distance from the top edge of the cabinet door and mark a horizontal line with a pencil. Then, measure from the bottom edge of the door and mark a line.
Do concealed hinges have less range of motion?
Concealed hinges may have less range of motion than other traditional hinges.
Do you have to bore through cabinet doors?
The line depth must be exact so you don’t bore through the cabinet door.
What is a Euro hinge?
Euro hinges—also called “cup hinges” or “concealed hinges”—look complicated. But they’re actually much easier to install than traditional hinges. Learn how to fix kitchen cabinets with Euro hinges here.
What degree do hinges open?
The simplest, smallest and least expensive hinges usually open to 105 or 110 degrees. If you want your doors to open farther for easier access inside the cabinet, the hinges will be bulkier and more expensive.
How to determine the amount of overlay on hinges?
If you choose overlay doors, you’ll have to decide how much. With some frameless hinges, the amount of overlay is determined by the thickness of the mounting plate; a thicker mounting plate results in a lesser overlay.
What is an inset door?
Inset doors are flush with the front of the cabinet; overlay doors cover all or part of the front. Some doors, called “partial inset” (not shown) are a combination of both. We show frameless cabinets here, but the same terms apply to face frame cabinets. Want to refresh your cabinet doors? Learn how here.
What is a face frame cabinet?
Face frame or not? A frameless or “Eurostyle” cabinet is basically a box. A face frame cabinet has a frame surrounding the opening of the box. Hinges like the face-frame hinge shown above mount onto the face frame, typically with a single screw.
What does it mean when a door hinge is self closing?
Most Euro hinges are self-closing, which means doors slam hard and loud. Pick up sheets of adhesive-backed cabinet bumpers at any home center for a couple bucks.
How to mark perfect centerlines for hinges?
To mark perfect centerlines for the hinges, lay the cabinet box on its side and center the door against it. Then trace along a marking block (2 to 3 in. wide). Use masking tape labels to match doors to their locations.
