how do you install hardwood on stair landing

by Mrs. Josefina Johns DDS Published 3 years ago Updated 2 years ago

How To Install Hardwood Flooring On Stair Landing? [Do It By Yourself]

Step 1: Measure And Buy Planks And Stair Nose Strips.
Step 2: Measure, Trim, And Install The Stair Nose Strips.
Step 3: Install Hardwood In The First Landing Platform- The First Line.
Step 4: Install Hardwood Plank To The First Landing Platform- The Second Line.
Step 5: Install Hardwood Plank To The First Landing Platform- The Last Row.

Full Answer

How to install hardwood flooring on stairs?

How to Install Hardwood On Stairs. 1 Step One: Trim Planks to Size. Measure each part of each step of your stairs separately. There are four important measurements: the tread (the part ... 2 Step Two: Install Risers. 3 Step Three: Install Tread. 4 Step Four: Install Balustrade. 5 Step Five: Sand and Finish.

How do you make a stair landing look like hardwood?

A simple piece of stair nosing wraps around the outer edge of your landing to create a finished edge. These often come in the same finish as your hardwood, or buy all the pieces unfinished so you can stain them together after installation. Measure the length and width of the landing. Buy enough tongue-and-groove hardwood to cover the space.

How do you install stair nosing on stairs?

Buy a piece of stair nosing long enough to cover the edge of the landing. Cut the stair nosing to the measured length with a table saw. Place the stair nosing so its lip rests over the edge of the landing. Nail the nosing with a nail gun held at a slight angle to offset the nails.

How do you cut hardwood stairs to size?

Measure the first line of hardwood boards and cut them to fit the space, using a table saw. Push the tongue of the boards into the groove of the stair nosing. Tap them securely into place with a rubber mallet.

How do you install hardwood floors on stair landing?

How do you finish a stair landing?

The best way to cover your landing is to install a "landing tread" at the front (or along the edge) of the landing. Once you install the landing tread you can install our 3/4" tongue and groove flooring that matches your stair treads and landing tread.

Can you have wooden floor on a landing?

Solid wood or engineered wooden flooring in your landing and on your hallway stairs is a fantastic way to create a modern and fresh look in your hall, which is a great first impression.

Which way should flooring run on landing?

The most common way to lay hardwood flooring is by aligning the planks parallel to the longest wall.

What type of wood is used for stair landing?

White oak is used for wood floors, stairs and even boat building. Another great reason to use White Oak is that it works well with hand and machine tools.

How do you transition hardwood to stairs?

0:385:30HOW TO WOODEN STAIRS - TOP STEP - LAMINATE - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe have our hallway. And we have what we're using here is a nosing. Now this nosing can be eitherMoreWe have our hallway. And we have what we're using here is a nosing. Now this nosing can be either purchased just like that or you can actually cut it off one of your stair treads.

Can you use hardwood flooring on stairs?

Hardwood is one of the best flooring choices for stairs, but a lot goes into installing it. In most home improvement projects, the skeleton of your stairs is already built, but the surface parts, the treads, and risers might need replacing.

What is the safest flooring for stairs?

carpetOut of all the options on our list, carpet is by far the safest type of flooring for stairs. A carpeted staircase with short, dense fibers can do a lot for your home. The shorter fibers are more durable and can weather heavy foot traffic while still feeling soft and comfortable underfoot.

Can you put engineered hardwood on stairs?

Engineered hardwood is often sold prefabricated into risers and stairs, so you need only to purchase the premade pieces in the color and dimensions you want. Once you've received them, you need to begin the process of preparing your existing staircase so you can attach the risers and the treads.

Does it matter which way you run hardwood flooring?

Wood floors should always be laid perpendicular to floor joists—across rather that in between them. This will make the floors structurally sound and will help prevent the planks from separating, sagging or buckling. So, there is no right or wrong way to lay your wood flooring.

Should you change direction of hardwood flooring?

The direction that a hardwood floor is laid is mostly a matter of personal preference. Typically, hardwood flooring should be placed perpendicular to the joists. However, you should avoid changing the direction of the floor in every room, as this creates visual disharmony.

Which direction should hardwood floors be laid in a hallway?

Whenever you are placing wood flooring in a hallway or any long and narrow area, it should run in the direction away from the doorway.

How do you build stair deck landing?

4:1414:48How To Build A Staircase Landing For A Deck - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I'm gonna have to having two stair stringers box timber stairs coming down here. And two comingMoreSo I'm gonna have to having two stair stringers box timber stairs coming down here. And two coming down right here and notching onto this deck. Or notching onto the stringers.

How big should a landing be on stairs?

36 inchesEvery staircase should have a landing at the top and bottom. The width of the landing, measured perpendicular to the direction of travel, must be no less than the width of the staircase. The minimum depth, measured in the direction of travel, is 36 inches.

Does the landing count as a step?

Does the landing count as a step? Yes it does. It amazes me how many people like to argue this one. Remember that when counting stairs, you are counting how many times you have to lift your foot.

How much room do you need for a staircase with landing?

Landings need to be at least 36 in. square or as wide as the stairs, but often should be larger to be more comfortable. They can provide architectural interest and help make a staircase more visually pleasing. In no instance should a stair be designed in a single run with a total rise of more than 12 feet.

Step One: Trim Planks to Size

Measure each part of each step of your stairs separately. There are four important measurements: the tread (the part that you stand on) length and...

Step Three: Install Tread

Make sure the tread lays flush and level against the riser. You can use wooden shims from your cuttings, like the ones pictured above, to fill in a...

Step Four: Install Balustrade

This part of stair installation is challenging and often best left to professionals. Entire guides have been written about installing stair baluste...

Step Five: Sand and Finish

Once the construction glue under the treads dries, sand the planks lightly, then sweep and vacuum away sawdust before applying stain and finish. St...

How to prevent seams from aligning on hardwood?

For example, if you have a long board and a short board on the first line, use a short board first on the second line to prevent the seams from aligning. Tap and nail the second line into place. Continue to the opposite edge of the landing.

What is stair nosing?

A simple piece of stair nosing wraps around the outer edge of your landing to create a finished edge. These often come in the same finish as your hardwood, or buy all the pieces unfinished so you can stain them together after installation.

Can you put hardwood on a landing?

Laying hardwood on a stair landing may seem intimidating because you don't want the bare hardwood showing on the landing's edge. A simple piece of stair nosing wraps around the outer edge of your landing to create a finished edge. These often come in the same finish as your hardwood, or buy all the pieces unfinished so you can stain them together after installation.

What do you use to fix a squeaky stair?

A small wedge of wood, shims also come in handy for squeaky stair repair.

How to measure for stairs?

Step One: Trim Planks to Size . Measure each part of each step of your stairsseparately. There are four important measurements: the tread (the part that you stand on) length and width and the riser (the back of each stair), and overall length and width. If your stairs are uneven in height, add 3/4 inch to the largest height ...

How to darken stairs with stain?

Stain will darken your stairs significantly, while a clear finish on its own will darken them slightly, about as much as the wood would darken when wet. Choose a stain/finish combo that fits your home decor. Brush the stain, then the finish, on with the grain, making sure to wipe away any excess with a cloth.

What is the best flooring for stairs?

Hardwood is one of the best flooring choices for stairs, but a lot goes into installing it. In most home improvement projects, the skeleton of your stairs is already built, but the surface parts, the treads, and risers might need replacing.

Is hardwood flooring good for stairs?

Hardwood makes a durable and stylish floor covering for stairs if you install it the right way. Here is a guide on how to install it like a pro. Hardwood makes a durable and stylish floor covering for stairs if you install it the right way. Here is a guide on how to install it like a pro.

Can you cut stair treads too short?

Do not cut planks too short! There is no easy fix for this besides getting a new plank and starting again. For tread planks, you can buy planks with pre-made rounded edges to keep your stairs from looking blocky. Cut the treads large, about one inch larger than the stair, so they hang over the riser.

How long should stair nosing be?

It is convenient and pre-stained to exactly match your existing hardwood flooring, but you may find you are limited to buy either a 3' or 7' length.

Can you replace carpet with hardwood stair treads?

When you are removing old carpet or vinyl tile from your steps and replacing them with hardwood stair treads, then you may also need to address the landing. You could use ceramic tile, or hardwood flooring left over from the main floor, but there are some situations where this is not the best or desired answer.

Can unfinished hardwood flooring be used on wood landings?

We have just started manufacturing unfinished hardwood flooring in lengths to match your stair treads for installation on wood landings.

Can you stain stairs and flooring at the same time?

The biggest advantage is that then you can stain all your steps, nosing and the unfinished flooring for your landing at the same time..... everything in your hallway will then match.

Can you put wood flooring on a landing?

Installing wood flooring on landings between two sets of stairs... When you are removing old carpet or vinyl tile from your steps and replacing them with hardwood stair treads, then you may also need to address the landing. You could use ceramic tile, or hardwood flooring left over from the main floor, but there are some situations ...

Can you use unfinished hardwood flooring?

Using our unfinished lengths of hardwood flooring is only an advantage when you are dealing with the challenge of stain matching.... or you want all full length segments of flooring.