Start installing the first row of boards to a string-line, fixing the boards at one end and affixing in the middle, adjusting spacing as necessary with the Millboard multi-spacers. Then fix to the remaining joists We recommend checking the boards against a string-line every 4th-5th row
Do I need to drill to install millboard?
With no pre-drilling needed, Millboard have made installation easy with their Durafix fixings. The stainless-steel screws have a self-cutting tip and simply need to be screwed in.
Why choose millboard decking?
Millboard joist cradles are suitable for all hard surfaces and also provide an acoustic benefit by helping to reduce sound transfer. Like the pedestals, the joist cradles are also adjustable. Say goodbye to unsightly screws in beautiful decking work. With no pre-drilling needed, Millboard have made installation easy with their Durafix fixings.
How many drill bits do I need for a millboard deck?
Creating clean, high-quality outdoor spaces has never been easier. Each decking board approximately requires 22 fixings and drill bits are included. Millboard pay attention to detail and offer a range of fascias and edging to complete the Millboard look.
How much space should be between millboard boards?
We recommend a 0.16" gap between the sides of boards and a 0.04" gap between the ends of boards, a 0.4" gap should be left between the boards and any solid surface to aid drainage. Does Millboard decking mark? The Lastane® finish is resistant to food and drink stains and scratches, and everyday wear and tear.
What is the gap between Millboard decking?
We recommend a 4mm space between the sides of boards and 1mm gap at the ends on butt joints, a 10mm gap should be left between the boards and any solid surface to facilitate drainage.
How do you screw a Millboard deck?
0:111:17Using Millboard DuraFix Fixings - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust drive the screw. Straight in we advise using a standard driver with the bit provided. And notMoreJust drive the screw. Straight in we advise using a standard driver with the bit provided. And not an impact driver to fix the drawer fixed screws to the decking.
Can Millboard be laid on concrete?
Yes. It is possible to install Millboard Decking over concrete.
Can you glue Millboard?
As Millboard is non-porous, any moisture from the soil in the planter will not affect our boards like it does timber. As Millboard can be mitred and glued using PU wood adhesive, it makes it very easy to create a seamless masterpiece.
Is millboard any good?
British-made Millboard boasts one of the highest anti-slip ratings, having been inspired by shoe soles. Both Millboard and American-owned Trex are also resistant to rot, mould, scratching and fading, unlike normal timber decking.
How many screws are in a millboard?
You will need around 22 fixings for each length of Millboard decking for residential applications and 26 fixings for commercial applications.
Can you screw decking straight to concrete?
Decking boards must NEVER be laid directly on the ground but instead should be fixed to joists of a suitable sub-frame. In most cases we recommend installing your Alpha Composite Decking on a solid concrete base using plastic composite joists.
Can you attach composite decking directly to concrete?
Yes, you can install composite decking on concrete. Concrete patios and other hard surfaces are an ideal place to lay deck tiles because they are stable and durable. Concrete provides a more stable surface for composite decking, compared to surfaces such as gravel or sand.
Does millboard decking get hot?
Millboard is UV-proof and has been designed to retain its colour. And as it's not real timber, it won't expand in the heat. But just like the rest of us, Millboard can get hot in high temperatures.
Can you jet wash Millboard?
DO NOT pressure wash as you could damage the finish on the boards. The surface texture is virtually non-porous, to remove dirt and grime wash with soapy water and bush with a broom before rinsing off.
Is Millboard decking slippery?
Slip Resistant decking you can enjoy with confidence In contrast, Millboard decking is made from an entirely wood-free material – it provides genuinely anti-slip decking.
Can I paint Millboard?
Options Available. Millboard Touch Up Paint is available in a range of seven colours to match the colour and style of your chosen board. The touch-up coating ensures that cut ends blend seamlessly into the installation, completing the high-quality finish of the Millboard decking.
Where do screws go on decking boards?
0:361:30Fixing down deck boards - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhen joining two cut boards together in a run fix. With screws ten millimeters from the end of theMoreWhen joining two cut boards together in a run fix. With screws ten millimeters from the end of the board at an angle to ensure secure fixings into the joist.
Do you screw decking at every joist?
Each deck board should be fastened with two screws at each point where the board crosses a joist to ensure the stability and durability of your deck's surface. Boards should be fastened to rim joists with three screws.
What bit do you use for deck screws?
For accurate drilling use a brad point bit. Set the power drill speed setting to level 1. Drive the screw straight down into the board, making sure the head is flush with the surface of the board.
How deep should decking screws be?
Deck screws should be slightly countersunk below the decking surface. The finish screws set to approximately 1/8″ (3mm) below the decking's surface.