- Draw a rough sketch with measurements
- Assemble your poles if applicable
- If using guy wire, hang this first. ...
- Hang your first patio light string with the male plug closest to your outlet.
- Use zip ties or hooks between each bulb as needed on deck railings or other structures. ...
How to plan and hang patio lights?
Hanging Patio String Lights Basic Steps. Draw a rough sketch with measurements. Assemble your poles if applicable. If using guy wire, hang this first. Using a guy wire can prolong the life of your light strings by removing the tension that is created on the string as your patio lights hang over time.
How to choose the best outdoor lights?
Here are a few outdoor light placement tips to help you:
- Use multiple lights to illuminate your outdoor dining area. ...
- Use a single light near an access point like a door for small deck and patio areas.
- Choose multiple lights for large and oversized deck and patio spaces. ...
- Use a combination of wall lights and other lighting styles to illuminate your pool area. ...
How to make outdoor glass hanging lights?
- Run string lights through the bottles (in and out).
- Make candle holders. You will have to cut the bottoms of the bottles.
- Use a DIY lighting fixture kit. Again, you will have to cut the glass to fit it.
- Make Tiki torches. ...
- Make a chandelier by creating a frame from wood and adding an array of lighted bottles.
How to hang Christmas lights the easy way?
The Simple Way to Hang up Christmas Holiday Lights Outside
- Binder Clips Make It Simple and Easy. To hang up Christmas lights using binder clips, you will need to buy several big boxes of them. ...
- Tips for Using the Clips. ...
- Hanging Christmas Lights Is a Tradition. ...
- Best Places to Buy Christmas Lights. ...
- A Competition and a Tradition. ...
What are straight lines for patio lighting?
What are outdoor patio lights?
How many watts does a patio light use?
Where do V lights start?
Can you buy lights and strings separately?
What is the easiest way to hang patio lights?
One of the ways to hang outdoor patio lights without nails is using adhesive hooks or gutter hooks. Alternatively, you can tape or staple them to your wall. You can also hang them on trees, bushes, posts, potted plants, and your fence. Another way to brighten up your patio is by using lanterns.
What do you attach patio lights to?
Here are the most common things you can attach string lights to in your backyard:trees.house, garage, shed, or other building.fence or wall.under the roof of a covered deck or patio.DIY posts or poles in the ground.DIY posts or poles in planters or umbrella stands.deck railing.
How do you secure outdoor string lights?
Use cable clamps, cup hooks, or other hardware to attach your string lights. One of the most common ways to attach string lights is to use cup hooks or Q hooks from Amazon. You can also use coaxial staples, which are available on Amazon. This hardware behaves like hooks.
How do you hang patio lights without drilling holes?
The best ways you can hang patio lights without nails is using gutter hooks, adhesive hooks, clear tape with a strong and reliable hold, using a hot glue gun, or staples to hang the lights. Other methods include zip ties, wrapping the lights around pot plants, or attaching them to the trees.
How do you hang patio lights without nails?
You can hang string lights on your patio cover without nails by using outdoor Command hooks, zip ties, awning hangers, or Alumahooks. Punching holes in your aluminum patio cover can be done, but you can avoid damage altogether by going nailless.
How do you hang patio lights without trees?
7 Ways on How To Hang String Lights in Backyard Without TreesHanging Lights on 4X4 Posts.Using Metal Pole and PVC.Other Ideas For Hanging Your Lights Without a Tree.Along the Fence Lighting.Deck Lighting.Gazebo or Pergola or Covered Patio String Lights.String Lights on Umbrella.Use Planters to String Backyard Lights.
Can you hang string lights without wire?
Hanging without a wire: To hang the patio lights without a wire, screw a cup hook into the wall, fence, pergola or tree trunk to use as mounting. (You may need to drill a hole first, before putting in the screw.)
How do you hang lights on a concrete wall without drilling?
Hanging Outdoor Christmas Lights Without Drilling Holes in Concrete StuccoShingle or Siding Tabs. Some stucco-covered homes still feature portions of the outdoor walls equipped with wooden shingles or vinyl siding. ... Gutter Hooks. ... Magnetic Hooks. ... Suction Cup Hooks.
How do you hang outdoor string lights on a pole?
3:316:07How To Hang Outdoor String Lights On Removable Poles or PostsYouTubeStart of suggested clipEnd of suggested clipUse a drill and drill a pilot hole at the top use a small hook about one and a half inches. AndMoreUse a drill and drill a pilot hole at the top use a small hook about one and a half inches. And screw it in to the top of each Pole.
How do you attach outdoor string lights to gutters?
For at least one side of the lights, you can use gutter hooks to hold the outdoor string lights. These are S-shaped hardware you can purchase at any home supply store (our favorite decorative ones are here). You can hang one end from the lip of your gutter, and thread the string light through the other end. Voila!
How do you hang lights on concrete?
0:544:14DIY Patio Lights (How to attach to brick or concrete) - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we tried in the brick. And they were bending pretty easily. So we're in the mortar. And theyMoreSo we tried in the brick. And they were bending pretty easily. So we're in the mortar. And they caught in the mortar. Good. So we hope they stay but we got them all down through there.
How do you attach patio lights to vinyl siding?
Hang a vinyl siding hook on your house. This is the most efficient method. Slip the top of the hook underneath a piece of siding and wiggle it until it “snaps” into place. This hooks it onto the bottom of the siding.
How do you install patio string lights on a deck?
Attach cup hooks to the ends of your posts. Screw a cup hook onto the end that the lights will hang from. You can use a power drill to make a hole or manually screw the hook into the post. Make sure the hook is all the way in and secure in the post. Choose cup hooks that also complement your deck.
How do you hang lights on concrete?
0:544:14DIY Patio Lights (How to attach to brick or concrete) - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we tried in the brick. And they were bending pretty easily. So we're in the mortar. And theyMoreSo we tried in the brick. And they were bending pretty easily. So we're in the mortar. And they caught in the mortar. Good. So we hope they stay but we got them all down through there.
How do you install an outdoor light fixture on brick?
Drill a hole into the brick with a masonry bit on each mark and tap a conical plastic anchor into each hole. Replace the light fixture, after first feeding the wires through the central hole, and drive screws into the anchors to hold the fixture to the wall. Caulk around the base of the fixture with silicone caulk.
How do you hang lights on an aluminum patio cover?
0:243:28String lights on Alumawood patio cover - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou want to remember that depending on where you're going to hang it and the area might be a littleMoreYou want to remember that depending on where you're going to hang it and the area might be a little shallower than other places. So this is the durable plastic. But it is adjustable.
How to Hang String Lights Outdoors
Nothing beats cafe-style string lights for their ability to quickly improve the ambiance in an outdoor space. In the evening, their soft glow overhead can visually transform an ordinary patio into a party-ready spot for hosting friends or cheer up a dim walkway with an inviting luminescence. Outdoor string lights are a cinch to put up if you have the perfectly positioned trees or fence.
Why do you need patio lights outside?
Another reason to install patio lights outside your home is that it will improve your home’s curb appeal. Having a well-lit patio will allow you to charge more for your home if you are listing it online, as you will be able to take beautiful pictures of your home and your patio at night.
What to use if you can't find adhesive hooks?
If you can’t find adhesive hooks or are afraid that the adhesive will be too strong, you can always use tape instead. Try to use clear tape, as that will be less noticeable. A clear tape will also leave less residue adhesive when peeled off.
Why is a patio good for selling?
If anyone drives by your home and you have a for-sale sign on your front lawn, having a well-lit patio will make your home more attractive. More people will notice it, and they will be more interested in buying. They will also be willing to pay more.
Can you put patio lights on one side of the patio?
Otherwise, you will only be able to install your patio lights on one side of your patio, which may not be enough to fully illuminate your entire patio for your needs.
Can you hang patio lights on the other end of a gutter hook?
Gutter hooks look like an S and, as the name might suggest, hang on your gutter. You can thread your patio lights on the other end of the hook. This method’s benefit is that you can move the hooks from place to place whenever you want, as they are not attached to anything.
Can you use nails to hang patio lights?
Whether you can use nails to install your patio lights depends on what kind of siding your house has. For example, if you have stucco siding , you can’t use nails to hang your patio lights. You may also want to be able to move your patio lights from one place to another easily, and using nails to install them won’t let you do that.
Do patio lights make your house look better?
Having patio lights will help you enjoy your patio. It will also make your home look better and improve your house’s curb appeal. However, is there any way to hang them up without putting nails into the wall?
What do patio lights do?
Patio lights can make a world of difference to your outdoor space. They immediately signal to all of your guests that you care about the ambiance of your patio.
Can you use trees as impromptu light stands?
You can use any trees in your yard as impromptu light stands.
Can You Hang Outdoor Lights On Brick Without Screws?
You should be able to use adhesive-backed hooks or hot glue when hanging outdoor string lights on brick.
Can you hang patio lights on a walkway?
Always be careful hanging patio string lights along people’s walking paths. Small, thin strings of outdoor lights are difficult to see when not turned on.
Can you use gutter hooks on stucco?
Using an adhesive on stucco increases the likelihood of damaging the surface. If you want to ensure that your exterior isn’t damaged, stick with using gutter hooks.
Can you use gutter hooks for string lights?
For at least one side of the lights, you can use gutter hooks to hold the outdoor string lights. These are S-shaped hardware you can purchase at any home supply store (our favorite decorative ones are here ).
Can you use string lights on trees?
Wrap The String Lights Around Trees. You can use any trees in your yard as impromptu light stands. While it’s perfectly fine to do this, you’ll want to make sure to shift the lights regularly. You want to avoid having the string lights grow into the tree (trust me, this can happen).
How to get rid of duct tape residue on patio?
Knives can also be used to gently scrape the residue from patio walls. Another alternative includes using a solution of soap and water to remove the residues.
Can you remove a hook when moving?
The pros of these hooks is that they are strong. You can also remove them when moving without dealing with nails or holes. On the other hand, there can be downfalls in using these hooks. They are not the easiest when trying to move any time you want. The strength of the adhesive reduces after you peel it off. This means it will be hard to stick it on another wall.
Do hooks on patio walls come off easily?
This leaves an ugly look on the patio wall and incurs additional costs to clean the wall. Avoid these hooks if you have wallpapers on your patio. Other brands have adhesives that can come off easily if you use a hairdryer.
Do patio lights need to be drilled?
To maintain the beauty of the patio, sometimes you will need ways to hang the lights without drilling. Nails and holes drilled can affect the aesthetics of your patio.
Can you use staples on patio walls?
The downside of staples is that they can destroy the patio walls. Also, staples can only be used on certain walls like wood. Do not use staples if your patio’s siding is stucco.
Can you hang lights on a gutter?
As the name suggests, gutter hooks are s-shaped and can be hung on the gutters. You can thread the lights on one end while the other end is attached to the gutter. The main advantage with this is you can move the lights any time you want. It thus suits people who like hosting different events on their patio.
Can you drill holes in stucco?
Using nails and drill holes can damage the elements of your house. If your siding is made of stucco, drilling nails damage it. Also, nails are limited in terms of flexibility. When you want to move the patio lights somewhere else, you will have to remove the nails.
How to fasten lights to railing?
In simpler configurations, like under a railing, try a staple gun, fastening the lights every few feet. Pull them taut as you go, keeping your general spacing and design in mind.
What is outdoor string light?
Outdoor string lights are both stylish and functional, illuminating your outdoor living space while providing an inviting ambiance for your family and guests to enjoy. No matter the size or layout of your yard or patio, there is a style and configuration of string lights that will work for you. Get creative with your outdoor string lights ...
When to take down string lights?
To maintain your string lights and maximize their longevity, be sure to take them down in winter if you live in a cold or snowy climate.
Can solar lights be used as a string light?
Consider solar-powered string lights for an energy-efficient option that uses the power of the sun’s rays. String lights come in a variety of lengths, but be sure to check the ones you like to ensure they have male and female connectors if you need to join more than one set together to span the length you’re covering.
Do you need to predrill holes for hooks?
It might be necessary to predrill holes for the hooks, depending on the mounting location’s material. When mounting the hooks to a brick wall, you’ll have to install anchors before screwing in the hooks themselves. In simpler configurations, like under a railing, try a staple gun, fastening the lights every few feet.
Do you need a wire mount kit for string lights?
At this point, you might decide to use a wire-mounting kit to stabilize the string lights if they’ll be spanning a large area or if you live in a particularly windy location . If using a wire-mounting kit, install that before putting up the string lights.
Can you use solar lights outside?
Another important consideration is how the lights will receive power. Those with easily accessible outdoor power outlets can use LEDs or incandescent lights, while battery-powered lights are a great option if there is no outlet nearby. You might require an outdoor extension cord if the outlet is too far from the mounting location. Consider solar-powered string lights for an energy-efficient option that uses the power of the sun’s rays.
How to Hang String Lights Using Glue
Make sure your stucco does not have any Styrofoam backing because it can melt under hot temperatures (hot glue).
How to Hang String Lights Using Double-sided Tape
Clean up the stucco surface that will hold the tape. Use a soft brush and tri-sodium phosphate to clean the surface. Use some rubbing alcohol to make the surface extra-clean. Just apply the rubbing alcohol on a microfiber dry cloth and gently wipe the surface.
Conclusion
Stucco is a soft wall that should be handled with a lot of care. This is why many homeowners are advised to avoid a drill when you want to hang patio string lights on stucco. Using glue and double-sided tape are the best options. However, nowadays there are plastic roof clips and bulb holders that come with glue on the holding side.
How high should patio lights be?
Generally, though, it's good to have lights 8-10' off the ground at a minimum just so there's walking clearance.
What is an X pattern patio light?
X Pattern Patio Lights- X marks the spot! This design works especially well in wide spaces or areas that are square shaped. If you have multiple light strings, hang several X's in a row to create a diamond pattern. The result is a light display that appears intricate but is actually incredibly easy to achieve!
Why are patio lights so popular?
If you're planning on hanging patio lights for long-term use , it's incredibly important to select high quality light bulbs and strings that are designed to be durable and continue looking great over time in outdoor settings.
What is a grommet on a light?
The hanging grommet is a machine-cut hole within a rubber brace above each light. You can thread a support wire, also called a guy or guide wire, through each of these holes to help bear the weight, if needed. LED Patio Lights. Hanging Grommets. Shatterproof Patio Bulbs.
Can you use guy wire on patio lights?
We recommend the use of guy or guide wire on longer light runs and projects where large, heavy patio bulbs are being used. When you stretch light wires between two points, there is constant lateral tension. It's kind of like a perpetual tug of war on your light strings, which isn't ideal. By using guy wire between two anchor points instead of the light string, you're removing the tug of war completely which means the lights you worked so hard to install are less likely to fall or sag over time.
Can you put cement poles in a bucket?
In smaller patio settings with no existing surfaces to hang lights, you can cement poles into painted buckets or decorative planters using the DIY method below.
Can you replace bulbs on string?
Look for bulbs that can be removed from the string. This allows you to easily replace bulbs if needed and change colors or themes over time if you want.
What are straight lines for patio lighting?
Straight Lines For Patio Lighting. Straight lines are an elegant option for any space. Shorter strings can extend from one point to another across the space and longer strings can be doubled to form small V's if needed.
What are outdoor patio lights?
Outdoor patio lights are an essential element to any backyard transformation. Globe and patio string lights offer a brilliant solution for creating exceptional atmosphere above bistro and restaurant dining areas, elegant illumination when used in weddings and also make a fun way to carry your events from day to night! In just a few easy steps and with the help of our commercial grade patio lights, you can transform your backyard into a professional quality outdoor oasis that is so inviting you may never want to come inside!
How many watts does a patio light use?
Patio bulbs can use up to 11 watts per bulb, when choosing larger bulbs. LED bulbs will greatly reduce any power needs up to 90%, but it is always essential to calculate for power to ensure your lights will stay on. To determine the amount of amps your lights will use, use the following equation:
Where do V lights start?
V patterns start at a central point, usually a tree or pole and can even start on a building and spread out. This lighting pattern can be created with one long patio lights string to form a simple V or several strings can be combined at the center point and anchored separately at various end points to create an umbrella effect.
Can you buy lights and strings separately?
For breezy and quick shopping, lights sets complete with strings and bulbs are available in a variety of colors, styles and lengths. If you want a customized look or can't find the specific string-and-light combination you want, the bul bs and strings can be purchased separately.
