What are the steps of installing shingles and shakes siding?
For example, 16-inch-long shingles should be installed with about five-inch exposures....InstructionsPrep the Walls. ... Apply Trim. ... Lay Out Courses. ... Install Corner Trim. ... Begin Installation on Exterior Corner. ... Continue Starter-Course. ... Trim Shingle. ... Set Up Jig.More items...•
How is shake siding installed?
How to Install Vinyl Shake SidingPop a level chalk line for the starter strip an inch or two above the bottom of the siding.Nail the starter strip to the siding, aligning the top of the strip with the chalk line.Nail vertical vinyl corners to the corners of the house, making sure they are plumb.More items...
What is under shake shingles?
Under the Cedar Shakes are furring strips. Furring strips are 4” wide boards that are spaced apart several inches, to hold up cedar shakes while allowing them to breathe. This does not work well with asphalt shingles because asphalt shingles are designed to go onto a solid wood surface.
Does a cedar shake roof require underlayment?
Shakes should never have underlayment installed except where an ice barrier is required over solid sheathing. Instead, interlayment is required. Interlayment consists of an 18-inch-wide strip of 30-pound black felt installed between courses of shakes.
Do shake roofs leak?
Leaks. Cracked shakes are more liable to cause leaks than other roofing materials. Since shakes crack and deteriorate over time, leaks can begin to pop up more easily, which can be a serious hazard if you don't tend to your roof quickly.
How long do shake roofs last?
between 40 and 50 yearsThe standard lifespan of cedar shake roof installations is between 40 and 50 years. The better condition you keep them in, however, the longer life expectancy you will see.
Can you walk on shake shingles?
So can you walk on a cedar shake roof? The short answer: yes. But you must be very careful. And it is certainly not advised.
Why are they called shake shingles?
Historically shingles, also known as shakes, were split from straight grained, knot free bolts of wood. Today shingles are mostly made by being cut which distinguishes them from shakes, which are made by being split out of a bolt.
Are shake shingles good?
Shingles are typically machine-sawn, with cuts varying from being along the grain and against the grain. Meanwhile, shakes are hand-split, ensuring that one of its sides is always along the grain. This gives shakes better wind and water resistance, and makes them the better option of the two.
What kind of nails do you use for cedar shake shingles?
We recommend stainless steel fasteners, hot-dip galvanized, or aluminum. With time, inappropriate fasteners can leave rust marks on the shingles, especially on natural cedar shingles.
What do you put under cedar shake roof?
Felt underlayments are usually made from synthetics such as fiberglass or natural materials like wood cellulose. They're then layered with a protective asphalt coating to defend against debris and moisture. This is a traditional underlayment option for cedar shingles.
What is the lifespan of a cedar shake roof?
30 yearsThe minimum cedar shingle roof life expectancy is 30 years — however, when you regularly maintain it, it can last an astounding 50 years or more. We've even seen some Cedar roofs last over 90 years! Taking care of a cedar roof will ensure it lasts longer.
How are cedar shakes installed?
How to Install Staggered Cedar Shake SidingInstall Your Building Paper. Apply overlapping horizontal rows of building paper onto the shear wall, using a staple gun with 3/8-inch staples. ... Nail Your First Cedar Shake. ... Create Your First Row. ... Install a Second Row. ... Stagger Additional Rows of Shakes. ... Snap Off Unused Siding.
How are wood shakes installed?
1:377:07How to Install Wood Shingles | This Old House - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo now the trick to installing any roof shingle it needs to overhang on the sides about 3/4 of anMoreSo now the trick to installing any roof shingle it needs to overhang on the sides about 3/4 of an inch. And on the front leading edge a wood shingle should be an inch and a half to an inch and 3/4.
What is the difference between shake and shingle siding?
Cedar shakes are split off while shingles are sawn smooth on both sides and cut tapered. Lastly, shakes are thicker than shingles. Durability – Generally speaking, cedar shakes are more durable and last longer than shingles because they are thicker and made from premium grade wood.
How do you install Hardie siding shake?
0:282:11Installation-7 Hardie Shingle - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhen installing hardy shingle. Individual or notch panels a quarter inch thick by one and a quarterMoreWhen installing hardy shingle. Individual or notch panels a quarter inch thick by one and a quarter inch wide starter strip should be applied first.
How Hard is it to Shingle a Roof?
Adding shingles onto a roof can be challenging and dangerous . It’s important to wear the appropriate safety gear such as a harness and a line attached to the ridge or staging with safety rails around it to protect yourself from falling.
How to make a straight edge with chalk?
Using the chalk line, snap a line between the two marks to get a straight edge.
How to avoid runoff when installing shingles?
Starting from the bottom, leave an inch and a half of overhang off the roof's edge. This is going to allow runoff to avoid the edges of your home. Once the first row is in place, you need to install the thickest part of the shingle at the top ...
What happens if you put a wrong nail on cedar shingles?
2. The Wrong Nails and the Wrong Tools. Installing cedar roof shingles requires nails, but the wrong nail can end up destroying the shingles before you even finish with the install. Not only that, but using the wrong tools to place the nails can also be detrimental.
Can you install cedar shake on a house?
A cedar roof is a great way to create a rustic look for your home. However, when it comes to installing cedar roof shingles, it’s no easy task. If you do not install your cedar shake roof the right way, it can seriously affect its longevity. While it is best to hire a professional to handle the installation for you, a cedar shake roof installation do-it- yourself job is not impossible.
Can you align cedar shake roofs?
Another common mistake people make when choosing to install a cedar shake roof themselves is not aligning the shingles properly. Like with anything in construction, if you do not take the time to align the shingles, it can lead to countless problems. If they are too close together, they can overlap too much, which can change their shape ...
Can nail guns be used on shingles?
A nail gun will penetrate too deeply and lead to a shorter lifespan for the roof. Similarly, choosing the wrong metal alloy can mean that the nails will not hold as well, and can lead to shingles becoming loose and falling off.
Does cedar shake roof need special tools?
Unlike real cedar wood, this synthetic option does not require any special tools or accessories. Beyond that, CeDUR has cool roof rated shakes, which require no special preparation for the cool roof ventilation to work. As a result, with CeDUR, you have a more cost-effective, maintenance-free, durable roof that looks just like a real cedar shake roof that you can install without the worry of making mistakes.
Cedar Needs Room To Breathe
As with any wood, even sturdy cedar, air flow and breathability prolong the woods life. Exposure to excess moisture for a long period of time will rot and eventually ruin even the toughest of wood species. Here are the appropriate steps your roofing professional must take to ensure the longevity of your cedar roof.
A Guide To Installing Cedar Shingles
The JB Western Red Cedar Shingles from Marley are a lightweight roofing and cladding solution with a high degree of natural thermal insulation. Treated with MicroPro® clear preservative to retain the natural look of Cedar, they weather beautifully to blend into the natural environment.
How To Install Cedar Shingles On A Roof
How to install cedar shingles on a roof will depend a lot on the size and shape of your roof. It is true that the size and quality of the roof will affect the ease of installing shingles. If youre building a new house, it would be best to install cedar roof shingles on top of a metal frame. Also, ensure that the roof is flat.
Cedar Shake Roofing Cost
A cedar shake roof averages $3.50 to $8.50 per square foot. It is highly durable and can easily last 50 years or longer when properly installed. The roofing repels insects due to the resin in the cedar. It can also stand up to storms and heavy winds well. However, cedar shakes weigh a great deal.
Removing Your Old Roof
Once youve made the decision to install a new cedar shake roof on your house, one of the first steps in the installation process is removing your old one. Luckily, the same knowledgeable and dependable team youve chosen to install your new roof will be the team removing your old one.
How To Fix Cedar Shingles
First things first, swap out old, rotten timber battens should you need to. Once this is done, regardless of replacing battens, install a waterproof membrane under the battens.
The Grade Of Your Cedar Shake Shingles
There are 3 grades of cedar shake shingles, common, selects, and 100% straight grain. The better the quality of the materials, the more life youll get out of your roof.
Use these modern methods and materials to create a timeless and durable wood roof
Synopsis: Cedar roofs, once relatively common, have been on the decline due to the rising cost of cedar and the growing popularity of metal. But the rustic look is unmatched, which is why the homeowners in this article wanted their replacement roof to look exactly like their old one.
Shakes or shingles?
When most people think of roofs, they think of shingles, but that’s not the case when it comes to cedar roofs. Cedar shingles are regularly used on walls, but cedar shakes are more common on roofs. So, what’s the difference? Shingles are sawn on both sides and thinner than shakes. Shakes are thicker, and split on one or both sides.
Not all shakes are equal
My customers wanted their new roof to look exactly like their old one. We chose Premium Grade Certi-Split handsplit cedar shakes, and specified 100% vertical grain. These “heavy resaws” are made from a block of cedar roughly 1-5⁄8 in. thick handsplit from a 24-in. log round.
When you install shingles from one row down from the peak, stop here?
When you've installed shingles from one row down from the peak, stop here. Never finish installing your top row until you've laid down a layer of roofing felt on the peak.
How to figure how many shingles you need?
Then, use that figure to estimate the number of shingle "squares" you'll need.
How to figure out the square footage of a roof?
Then add them together. Begin by measuring the roof width and roof height on one section of your roof, then multiplying the two numbers. A section that is 30' long, for example, and is 20' from eaves to the peak will be 600 square feet. Use this same formula to figure each section. Add the total of square feet, add 10 percent for waste, and then divide this number by 100. This total will then be the number of squares you'll need.
Do you need a solid surface for shingles?
You'll need a solid surface for your new shingles, so don't begin installing the new shingles until you have replaced any missing nails in the old shingles and have nailed down all old shingles that are loose.
How many linear feet of shingles in a box?
Use Mountain Ridge accessory shingles to cover hips, ridges or rake edges. One box will cover 20 linear feet. To prevent damage to shingles during application, they must be sufficiently warm to allow proper forming.
Where to apply primary field roofing?
Apply the primary field roofing up to the hip or ridge from both sides of the roof and trim flush or lap over one side, not more than half the width of an accessory shingle.
What is Cedar Crest shingles?
Cedar Crest® hip and ridge shingles deliver a thicker appearance to accentuate the roof lines for a more attractive finish. Unlike other accessory products which have a monotone appearance, Cedar Crest has blended colors that complement the Landmark® Landmark TL, Presidential® and Presidential TL shingle colors. Cedar Crest’s multi-layer design gives additional protection at critical stress points and its aggressive sealant helps ensure the caps stay on the roof.Use Cedar Crest accessory shingles to cover hips and ridges. Carefully separate the three-piece units prior to application, by first folding along the pre-cut lines and then detatching the pieces (see Figure 15-19). No cutting is necessary. There are 30 individual shingles (10 three-piece units) in each bundle. One bundle will cover 20 linear feet. Each 12" x 12" shingle has a shadowline that is a design feature which is visible when applied properly. To prevent shingle damage during application, they must be sufficiently warm to allow proper forming.
What size is a presidential shake?
Presidential Shake and Presidential Shake TL shingles are a premium oversized (141⁄4" x 40") roofing product. These shingles would fall in the “best” category when offering a choice of “good,” “better” and “best” products.
