Conventional installation method
- Layout your light locations on the ceiling Using a tape measure and the layout/grid design that you’ve decided on,...
- Cut the hole that you’ll install the fixture into Using the table above to find the correct hole size for your...
- Run your wire to the light location In accordance with NEC and your local electrical code, run your 120VAC...
How do you connect LED wafers to electrical wires?
Let’s get into it! This style comes in a thin housing as a single unit with LED lights attached. You can connect Wafers to electrical wires directly. Because of the way they’re connected to your wiring, they don’t require an electrical box.
What are LED wafers and how do they work?
This style comes in a thin housing as a single unit with LED lights attached. You can connect Wafers to electrical wires directly. Because of the way they’re connected to your wiring, they don’t require an electrical box. Wafers use a built-in, energy-efficient LED light, so when they stop working, you must replace the whole fixture.
Should wafers be installed before or after drywall?
While there are no standard installation rules for Wafers, the single unit design means there are no Cans to install before the ceiling drywall goes in, making it super easy to install. (Bonus point: That also means no heat or energy can escape!)
Where can Canless lights be installed?
Most Canless lights can be installed in areas that have small plenum height and where Cans can’t be mounted. And thanks to their sleek, seamless look, they’ve become increasingly popular in the luxury home category.
How do you install wafer lights in new construction?
0:513:03How to Install an LED Ultra-Thin Wafer Downlight | Lithonia LightingYouTubeStart of suggested clipEnd of suggested clipIf a new hole is to be cut use the provided hole template or drill saw with the diameter. NeededMoreIf a new hole is to be cut use the provided hole template or drill saw with the diameter. Needed mark your Center and then cut the opening with the saw hole electrical wire and cut length.
Where should wafer lights be placed?
Accent Lighting If you plan to illuminate an entire wall or accent particular architectural features or pieces of art, the rule of thumb is to place your recessed light fixtures between 1.5 feet and 3 feet from the wall. If your fixtures are fixed, they should be placed a bit closer to the wall.
How much does it cost to install wafer lights?
Labor. The cost for an electrician to install recessed can or canless LED lights will generally be between $200 and $250 per fixture. Professionals charge at a rate of $85 to $105 per hour and each installation takes approximately 2 to 2.5 hours.
How do you install wafer lights in soffit?
3:063:46How to Install an Ultra Thin LED Downlight Outdoors | 1000Bulbs.comYouTubeStart of suggested clipEnd of suggested clipPull two spring clips on the fixture up and through the cutout hole place a module in the soffitMorePull two spring clips on the fixture up and through the cutout hole place a module in the soffit hole making sure the spring clips are holding securely.
How many wafer lights do I need?
A common rule of thumb is that you use one recessed light for every 4 to 6 square feet of ceiling space. Doing so provides even, overall illumination. This is an important rule to keep in mind when you are going to rely exclusively on recessed ceiling lights to illuminate your kitchen.
How many recessed lights can I put on one switch?
The main limitation on the number of recessed lights that a single switch can control is the rating of the circuit breaker controlling the circuit. Each incandescent or halogen 60-watt bulb draws around 1/2 amp, and therefore, standard lighting with a 15amp breaker can manage 30 lights.
Do you need an electrician to install recessed lighting?
Installing recessed lighting can be challenging—you might want to hire an electrician to do the job. Even if you're experienced in wiring light fixtures, installing recessed lighting comes with some challenges that may be best left to a professional.
Can I install recessed lighting myself?
If you have a nearby power source, you can easily install recessed lights by yourself. Bringing in a power source adds some time to the project, but this can be accomplished by wiring your own circuit or hiring an electrician.
Does recessed lighting add value to a house?
LED recessed lighting is particularly appealing to prospective buyers and, according to research by Vonn, could add anything between 1% and 3% to your home's value – enough to pay some estate agent fees!
How long do wafer lights last?
However, these lights don't burn out and leave you in the dark all of a sudden—the LEDs dim slowly over time. And since they're rated to last 50,000 hours, or for 45 years based on 3 hours a day usage, you won't have to worry about that anytime soon!
Where should soffit lights be placed?
Soffit lighting is one of the most popular ways to light the outside of a house. These lights can be installed into soffits (i.e. any space below an overhang), roofs, eaves, and porch overhangs to create a downlighting effect.
How do you install flood lights in a soffit?
0:0720:46How To Install A Motion Activated Security Light - YouTubeYouTubeStart of suggested clipEnd of suggested clipOutside for for the exterior of the house you want to make sure it's a water resistant or waterproofMoreOutside for for the exterior of the house you want to make sure it's a water resistant or waterproof. Box which is what this one is you're going to need a hole saw such as this to make the hole.
How many recessed lights do I need?
Formula: total sq. footage x 1.5 = total wattage needed. Total wattage divided by 60 watts (or whichever wattage you select) = total amount of recessed can lights. Example: 240 square foot room x 1.5 = 360 divided by 60 (the bulb wattage I'd like to use) = 6 recessed lights needed.
How long do LED wafer lights last?
However, these lights don't burn out and leave you in the dark all of a sudden—the LEDs dim slowly over time. And since they're rated to last 50,000 hours, or for 45 years based on 3 hours a day usage, you won't have to worry about that anytime soon!
How do I install multiple wafer lights?
5:2412:09Ho To Install Multiple LED Recessed Lights DIY A to Z Part 1 - YouTubeYouTubeStart of suggested clipEnd of suggested clipIn i'm opening these two latch here with my hand. Okay one and two. Okay and i just insert. ItMoreIn i'm opening these two latch here with my hand. Okay one and two. Okay and i just insert. It inside this hole okay you're ready to push it it's really tricky but you see what i'm doing here.
How long do Canless lights last?
Many LED lights are rated to last 50,000 hours or more. That translates into roughly 5 and a half years, if you had the lights running 24 hours a day. That's 22 years if the lights are used an average of 6 hours per day or 45 years at 3 hours per day. Integrated LED lighting fixtures have the LED bulb or lamp built in.