Step-by-step Guide to Edge Joining Boards Using Kreg Jig
- Step #1 First, you need to set the Kreg jig to the right setting depending on the thickness of the board. Image Source
- Step #2 Drill the holes by using the bit included with the jig. ...
- Step #3 The boards are together by choosing the right screw and driving them in the hole. ...
How do you join edge boards with a KREG jig?
Begin using your drill or impact to screw your workpieces together for edge joining. Take your time to ensure that you don’t strip the hole out. The strength of the joint will decrease dramatically if the hole becomes stripped out. That’s it enjoy your beautiful edge joined boards all created with your Kreg Jig.
Can you use a pocket hole jig to join boards?
You can use a pocket hole jig for many purposes. One useful thing you can do with Kreg jig is joining boards edge to edge. Many woodworkers are edge joining boards using a Kreg Jig in creating tabletops and other flat surfaces woodwork projects. In this article, you will learn how to edge join boards with Kreg Jig.
Why should you use KREG joinery and Kreg jigs?
It’s no surprise why modern woodworkers are using Kreg Joinery and Kreg Jigs to achieve their best woodwork project results. A pocket hole jig or Kreg jig can be used for different purposes, and one of these is edge joining boards. Any woodworker may encounter a situation wherein they need to join boards edge to edge.
How do you use KREG pocket-hole jigs?
Set up your Kreg Pocket-Hole Jig to match your material thickness, and then drill the pocket holes. Place holes about 1-2″ from each end of the board or panel, and then every 6″ or so in between.
How do you join two pieces of wood with a Kreg Jig?
1:345:35Kreg Jig Wood Joining Tool | The Home Depot - YouTubeYouTubeStart of suggested clipEnd of suggested clipI just simply drill holes along the edge where it'll be join. Now you don't have to worry aboutMoreI just simply drill holes along the edge where it'll be join. Now you don't have to worry about spacing these holes. Exactly just put them about six to eight inches apart.
How do you connect flat boards together?
1:459:36Need Wide Boards? How to make panels by edge joining lumberYouTubeStart of suggested clipEnd of suggested clipBut jointed edges will meet together perfectly to create a strong connection. You can use aMoreBut jointed edges will meet together perfectly to create a strong connection. You can use a specialized tool called a jointer.
How do you connect two boards end to end?
0:3713:54Tips & Tricks for Making Boards Longer / End-to-End Woodworking ...YouTubeStart of suggested clipEnd of suggested clipLet it sit for 15 minutes then reapply another skim of glue on each side and put that together thatMoreLet it sit for 15 minutes then reapply another skim of glue on each side and put that together that actually holds fairly well. And of course it's not this way it's not still not very strong.
Do Kreg joints need glue?
You can assemble pocket-hole joints without glue. We've always said that a joint made with Kreg Pocket-Hole Screws is so strong that glue is optional. That means you can use glue if you want, but it's not necessary in order to create a strong, lasting joint.
How do you join a board without a jointer?
So if you don't have a table saw or a jointer, you can still joint boards with a circular saw. All you would need to do is make a similar jig using the MicroJig dovetail clamps. The clamps allow you to clamp your stock and use the jig as an edge guide for the circular saw. Easy peasy lemon squeezy.
How do you put two boards together?
#1: Wood Glue. Using wood glue is the first, and in many ways most accessible, method of joining two boards together lengthwise. In essence, it requires you to run a solid bead of wood glue down the length of one board before aligning and affixing the other.
How do you join the edge board?
2:4211:57How to edge joint boards (without a jointer) to make wide panelsYouTubeStart of suggested clipEnd of suggested clipAnd use your rip fins. So what we're going to do is try to joint these boards. It's a matter ofMoreAnd use your rip fins. So what we're going to do is try to joint these boards. It's a matter of making sure that one side is perfectly flat. So that when you are one edge. So that when you glue them
How do I make my board longer?
1:344:33Make wooden boards longer/thicker (NOT A JOKE!) - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne. So i place the angled ends back together and i slide them against one another this makes theMoreOne. So i place the angled ends back together and i slide them against one another this makes the overall length. Longer i can stretch it all the way to 51 inches.
How do you join long boards?
1:206:52How to Joint Longer Boards - YouTubeYouTubeStart of suggested clipEnd of suggested clipReally big long boards. So for this method. It's gonna be very simple all you need is two screws.MoreReally big long boards. So for this method. It's gonna be very simple all you need is two screws. And these are two inches in length.
Should I use glue with pocket hole joints?
If you're using pocket screws to build a dining room table for your forever home, then you'll want to use glue with your joints. The glue will give you some added strength and inhibit your joint from separating.
Are pocket hole joints strong?
The superior strength of a pocket hole joint has actually been proven. Independent testing found that a pocket screw joint failed at 707 pounds when subjected to a shear load while a comparable mortise and tenon joint failed at 453 pounds - meaning that the pocket screw joint was approximately 35% stronger.
Do I need to use glue with pocket holes?
Glue might strengthen the pocket hole joint, but it's not necessary. This makes pocket holes a faster joint than others.
How does a jointer work?
The blades on the cutter head of the jointer are dead-flush with the outfeed table. Raising or lowering the infeed table adjusts the depth of cut. As wood is fed into the cutter head, material is removed making that face or edge of the board parallel to the outfeed table.
How do you fly a perfectly flat wood?
5:2915:26Getting Wood/Lumber Dead Flat with a Hand Plane - YouTubeYouTubeStart of suggested clipEnd of suggested clipDoesn't cut on the sides. Of the blade. So what that means is if you go in the same area hence downMoreDoesn't cut on the sides. Of the blade. So what that means is if you go in the same area hence down the middle if there's a concave uh you want to go until it stops.
How do you use a winding stick?
2:4523:58How To Use Winding Sticks (MUST SEE) - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut it would be very difficult to judge the center of the board and the center of the winding sticksMoreBut it would be very difficult to judge the center of the board and the center of the winding sticks. So by having that dot on there you can set that down and get it approximately in the center.
How do you flatten a board with a hand power planer?
3:135:37Flattening stock with a portable power plane - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne one two take one pass all the way down the center of the board.MoreOne one two take one pass all the way down the center of the board.
What clamps do Kreg use?
Kreg offers a couple of clamps that make it a whole lot easier: The Right Angle Clamp and the 90° Corner Clamp. Though these clamps work differently, they both help hold the corner together at the proper angle. Plus, both clamps offer an extra hand, so you have both of yours free to handle your drill and screws. 6.
How to make a pocket hole jig?
2. Set up your pocket-hole jig for the thickness of material you’re using, and then drill pocket holes along one edge of all the boards except the last one. 3. Assemble the boards using Kreg Pocket-Hole Screws. Make sure you have the boards in the order you want, and the edges and ends aligned.
What is a 90 degree joint?
This is known as a “T” joint, and is made in essentially the same way as a box corner joint.
How to make a solid wood edging?
2. Drill pocket holes in the plywood along the edge (s) where you wish to add solid wood. 3. For the most seamless transition from the plywood to the solid wood, spread a thin layer of wood glue along the edge of the plywood . 4. Clamp the edging to the plywood.
What are Kreg screws?
Just as importantly, Kreg Screws are designed for pocket-hole joinery. There are several factors that determine which one is right for you, including the type of wood you are using, and its thickness. Check out this guide to choosing the right screw to learn more.
How to hold boards flush?
To hold the faces of the boards flush as you assemble them, clamp across each joint as you drive in the screws. There are many kinds of Kreg Clamps that are designed to make pocket-hole construction easier, including Wood Project Clamps, Bench Clamps, or Classic Face Clamps.
Where do you drill pocket holes?
If the outside of your box will show, like on an entertainment center, you’ll want the pocket holes on the inside faces. If the inside will show and the outside is hidden, such as on most kitchen cabinets, you can place the pocket holes on outside faces.
Why use a Kreg jig?
Why would you want to use a Kreg jig over other methods for edge joining? When choosing a Kreg jig to do edge joinery it’s just a strong method. Using pocket holes also gives you the ability to eliminate the use of clamps to hold your workpieces together when using glue. The sheer speed of using the Kreg jig makes it such a great choice.
Can you edge join with a Kreg jig?
While there are many options out there when edge joining our workpieces together Kreg jig really has made the process smooth. I have edge joined projects in my home that have yet to have a failure. These are high use items as well. Our coffee table and dining table are both built using pocket holes created with a Kreg jig.
Can you go wrong with a Kreg jig?
You can’t go wrong with a Kreg jig and pocket holes in your projects. They may cause a little uproar in the purest community of woodworkers but they are bomb proof joints. Thanks for reading and be sure to share with friends that could use this great information. Best 6-inch Dado Set: What Can We Make With Dados.
What is a kreg joinery?
Kreg Joinery helps woodworkers of varying skill levels to build projects stronger, a lot faster, and better. You can find all of the pocket-hole jigs, hardware, and machine online so you can complete high-quality projects easier and faster.
How to glue a board together?
A simple way is to use glue to the board’s edge and then clamp them together to dry. However, this method is time-consuming and you need several clamps for holding the boards.
What can you do with a pocket hole jig?
You can use a pocket hole jig for many purposes. One useful thing you can do with Kreg jig is joining boards edge to edge. Many woodworkers are edge joining boards using a Kreg Jig in creating tabletops and other flat surfaces woodwork projects.
What tools are used to join boards?
However, is simpler and more straightforward. The 3 components to join boards using a pocket hole tool include drill or driver, drill bit and screws, and pocket hole jig.
How to join wood to a second piece?
It is incredibly fast, simple, and a strong way of joining wood which involves drilling a hole at an angle of one piece, and joining it to the second piece using self-tapping screws.
Is biscuit joining easy?
On the other hand, biscuit joining comes with some advantages. It is easy and quick to use and the boards are easily aligned depending on the depth setting of the tool. However, it may not create a strong joint and it requires to insert materials and plate joining tool.
Kreg Jig Settings Chart and Calculator
DISCLOSURE: THIS POST MAY CONTAIN AFFILIATE LINKS, MEANING I GET A COMMISSION IF YOU DECIDE TO MAKE A PURCHASE THROUGH MY LINKS, AT NO COST TO YOU. PLEASE READ MY DISCLAIMER FOR MORE INFO.
Kreg Jig Settings Calculator
Use this calculator to determine the settings you need for your Kreg Jig and drill bit. It will also tell you what length screw works best for your wood thicknesses. Make sure to choose the correct joint type for your joint.
What can you do with a pocket hole jig?
Save. A pocket hole jig can be used for many purposes. One of the most useful things you can do with it is join boards edge to edge . I can’t tell you how many times I find myself edge joining boards with a Kreg Jig. It allows me to create table tops and other flat surfaces for all kinds of projects.
How to glue a board to a board?
The most obvious way is simply using wood glue (read about PVA Glue here ). Simply apply glue to the edge of the board and clamp them together for enough time to dry solid. It is a great way to do this.
How many components are needed to join boards with pocket hole tool?
There are really just three components to joining boards with a pocket hole tool:
What is biscuit and plate joining?
Biscuit and Plate Joining. Some people like to use biscuit joining and plate joining methods to help align the boards when butting them together. These tools generally create a slot where a biscuit, dowel, or other type of insert is placed and aligned with a hole on the adjoining board.
Do you need special screws for pocket holes?
The pocket holes normally require special screws for this purpose. I talk about why pocket hole screws are needed here. Sometimes it helps to clamp the boards together, but this is not at all necessary. Once you drive the screws the boards are connected, no need to wait for any glue to dry.
Can you use pocket hole jigs on edge joining boards?
For me that means using a pocket hole jig more often than not . It works great for edge joining boards and I will be using it for the foreseeable future.
Do you need to wait for glue to dry on a board?
Sometimes it helps to clamp the boards together, but this is not at all necessary. Once you drive the screws the boards are connected, no need to wait for any glue to dry. And this joint is just as strong as the others previously mentioned.
Step 1: Determine pocket hole placement
I find it is easiest to mark all of your pieces first, so you can drill all of your pocket holes at one time. This is especially useful when you have a lot of pocket holes to drill, as it cuts down on time.
Step 2: Determine screw size
See my tips below for which screw you need to use. The Kreg screws are self-tapping so they won’t split the wood and eliminates the need to pre-drill holes.
Step 3: Set Drill Guide Height
This setting is on your actual jig. You will set this setting to the thickness of the thinnest board you are joining. Lock this in place before moving on.
Step 4: Set Drill Bit Depth Collar
This will control the depth of the hole you drill into your piece. Align the step collar on the bit to the guide on your jig that matches your wood thickness. Tighten the collar with the provided allen wrench.
Step 5: Drill your pocket hole
Using one of the three drill bit guides of your choice, plunge your drill until you reach the depth collar. Place the pocket holes 6-8 inches apart if you are joining long pieces together. Two pocket holes are generally needed so your piece doesn’t twist.
Step 6: Attach the pieces with screws in the pocket hole
Use the screws that you chose (tips below), along with the provided drill bit and clamps to secure the screws within the pocket hole. Glue is optional, although it will make your joint much stronger.
