How to Install a Plastic Shed Base Kit
- 1. Make sure you have everything you need In this piece, we’re referring to plastic grid shed bases, which are so called because they are made with interconnecting grids. ...
- 2. Prepare the ground ...
- 3. Lay the weed membrane ...
- 4. Lay down the shed base kit ...
- 5. Fill the spaces in the grids with pea gravel ...
- 6. Build your shed on top of the plastic base
Full Answer
How to install a plastic base for a shed?
How to Install a Plastic Pro Base 1 Set the shed base grids down on the prepared ground. They come in sections, each with 49 feet to spread the load of the building that will be put on ... 2 Fill the grids with pea gravel. This isn’t always necessary. ... 3 Build your shed or garden building on top of the plastic base. This is the final stage. ...
How do you build a simple shed?
After you have placed your choice of suppressive fabric you then place the grid pieces that you have cut to size. They fit together quite easily and you will then just have to fill them in with pea gravel. You then build your shed upon this surface. With very little to no heavy lifting involved these plastic bases can be very good for your back.
Can I Lay a shed directly on the ground?
These can often be adjusted (up or down), even after the sheds on top of the base. If you're laying the shed on a hard, level surface such as a patio or driveway, then although you might be able to get away with placing the shed directly on the ground, I highly recommend the plastic runners which will clip onto the floor beams of the shed...
How are plastic sheds made?
Plastic Shed Base Foundation Plastic sheds are manufactured with resin sheets, each sheet requires a plumb alignment with the next panel and their fixing holes to line-up with the holes in the metal framework prior to securing with screws.
What do you put under a plastic shed base?
From any good builders merchant, you can buy these materials; Angular gravel or crushed aggregate which is used to create a sub-base. Decorative gravel is used to fill the shed base once it has been laid. Sharp sand is used to level off the sub-base to make sure the base will be stood on level ground.
How do you install a plastic grid base for a shed?
Plastic Shed Base Installation By Renovation Bay-BeeStep 1 - Mark Out Your Area. ... Step 2- Dig Out and Level the Area. ... Step 3 - Pin Down the Membrane. ... Step 4 - Lay & Compact Sub-Base. ... Step 5 - Lay Down Your Shed Base. ... Step 6 - Fill the Panels With Gravel. ... Step 7- Build Your Shed.
Can you put a plastic shed directly on the ground?
Can you put a plastic shed directly onto grass, dirt or gravel? Not really. Plastic sheds aren't susceptible to water damage themselves. But if the shed sits on wet ground, extra moisture will permeate the air inside, causing increased condensation which will damage your bike and other valuables.
How do you anchor a plastic shed to the ground?
Plastic sheds are light and often held together with ½” sheet metal screws. To anchor them to a concrete pad you need ½” concrete expansion or wedge-bolt at each corner. A galvanized or plastic coated cable or strap long enough to go over the shed from one anchor to another.
Can you put a plastic shed base on concrete?
A very common question that we asked her at the Shed Base Company: “Can I install my plastic shed base directly on top of my existing concrete flooring?” To answer simply, yes.
Does a shed base need a membrane?
A level base for any of these sheds is vital. The concrete, or slab base, should contain a damp-proof membrane (sized to the entire surface area the shed will occupy). This should be inserted below the flags, or 2” below the surface of the concrete slab.
Do you need foundation for plastic shed?
The only time you wouldn't need some sort of foundation is if you have a very small 6×6 or 8×8 shed that is made out of rubber or plastic. And even in that case, we still highly recommend a gravel foundation to keep that little plastic shed from sinking into the ground or experience moisture problems as time goes on.
Can you put a plastic shed straight on to grass?
Summary. Overall, we don't recommend using a grass lawn to install a shed on. While it may sound like a fast solution, it's likely going to cause damage to the building within a few years. Any garden building requires a base that is both even and solid.
Can you put a plastic shed on paving slabs?
It's possible, yes, to put a shed on a base constructed from paving slabs. The shed should sit on top of pressure treated bearers to allow airflow underneath the building. Paving slabs are one of the most popular choices when it comes to choosing a shed base.
Can you put a shed on pavers?
Pavers fit together tightly, allowing you to create a sturdy base for your shed. Plus, they are durable and relatively inexpensive letting you get top quality results without breaking the bank. Using a shed paver foundation ensures your new outbuilding is on a stable, level surface.
Will a plastic shed blown away?
Will a plastic shed blow away? Anchor your plastic shed to its base to ensure it stays firmly fixed to the ground. Polycarbonate sheds offer plenty of protection from wet weather, but they're lightweight, so there is a risk of them being blown over, or even blown apart, in strong winds.
How do you anchor a shed without concrete?
How to Anchor a Shed to the Ground Without ConcreteLooping a cabled anchor around a ground frame.Looping a cabled anchor over an inside structural member.Bolting a cabled anchor to the outside of the shed.Using large Penetrator anchors under the ground frame for both support (replacing footings) and as a hold-down.More items...•
Can you use plastic pallets for shed base?
Because plastic pallets are extremely sturdy, you can easily use them as a base for your raised floor.
What is the cheapest way to build a shed base?
Hi, The best way would be a concrete slab base and the cheapest way if the ground your putting the shed onto is reasonably level would be to lay pressure treated bearers across the joists of the shed base.
How do you install a storage foundation for a shed?
0:483:13How to Build a Shed Foundation - YouTubeYouTubeStart of suggested clipEnd of suggested clipAbout 4 to 6 inches of gravel in the hole. Compact. It then add concrete following theMoreAbout 4 to 6 inches of gravel in the hole. Compact. It then add concrete following the manufacturer's directions once the concrete has cured. Set a post on top of the footer.
What is the best foundation for a shed?
A gravel pad (crushed stone) with a lumber perimeter is the best shed foundation option in most cases. We recommend gravel shed foundations because they provide a stable base for your shed to rest on and do a great job of draining water away from the bottom of your shed.
Why gravel grid on shed?
The gravel filled grid reduces the splashing effect of the rain on the bottom part of the shed which means that your shed's lower timbers will not get nearly as wet.
What are the benefits of a shed?
There are many other benefits to these bases as well: 1 With the shed being built right upon the grid-work rodents will not be able to easily enter your shed without gnawing through a more obvious spot than the floor. 2 The gravel filled grid reduces the splashing effect of the rain on the bottom part of the shed which means that your shed's lower timbers will not get nearly as wet. 3 The plastic base grids allows the bottom of your shed to get sufficient ventilation which allows the base timbers to stay dry and thus stops decay. 4 Being made of recycled plastics means that the grids themselves will not rot so they will last a very long time. 5 The plastic is normally UV stabilized which means they will not get brittle in the sun o ver time as some plastics have a tendency to do. 6 The plastic cannot hold moisture like a concrete base which means that they will not sweat as an unsealed concrete pad might.
What does it mean when a grid is made of recycled plastic?
Being made of recycled plastics means that the grids themselves will not rot so they will last a very long time.
How much does a concrete slab weigh?
In contrast a similar sized slab of paving concrete will weigh somewhere in the area of 30kg. This is a major difference especially when you figure for the entire area you will be covering.
Can plastic hold moisture?
The plastic cannot hold moisture like a concrete base which means that they will not sweat as an unsealed concrete pad might. When you are considering what sort of material to use for making your shed base, these benefits should figure into that decision. Choose wisely and you can have a base that can outlast your shed by years.
Can you use plastic pavers for driveways?
I don't believe that a specialised system of this type is available in the US. However plastic 'grass pavers' are available as permeable paving grid for driveways. These work in a similar way and will probably work out cheaper than a specialised system.
Do you need to dig up the ground to build a base?
When you have determined the size of the base that you need you must make sure that the ground is clear. There is no true excavation required, however you must ensure that the ground upon which you are placing it is firm and level by filling in low points or leveling off high spots.
What is plastic shed?
Plastic sheds are manufactured with resin sheets, each sheet requires a plumb alignment with the next panel and their fixing holes to line-up with the holes in the metal framework prior to securing with screws. A perfectly level base escapes frustrations by delivering easy alignment and aids accomplishing a fast efficient assembly procedure.
What is the priority for a plastic shed base foundation?
The #1 priority regarding a plastic shed base foundation is to prepare a solid level substructure for the shed to stand on whilst raised slightly above the grounds floodplain level to avoid the shed being sat in a flood is highly beneficial.
Why do we need wood decking for a resin shed?
We decided on wooden decking for our resin shed foundations, simply because some friends had a surplus of decking left over after completing their patio, the left-overs fit our dimensions.
Why anchor plastic sheds down?
It’s important to anchor plastic sheds down onto the solid foundations to increase wind resistance levels and stability regarding their overall construction. Anchor screws are not included, their type is dependant on the foundation material laid below.
How many legs does a deck need?
We fit a few spurs of timber across the widths in equal measurements to enable supporting the decking, secured 6 legs to the corners and centres measuring about a foot long and then proceeded with the ground location.
What is solid foundation for plastic shed?
Solid level foundations are imperative for any plastic shed construction. This one-step process regarding preparing the correct base eliminates assembly headaches and future issues in one fell swoop by ensuring a superlative shed stance.
What is the foundation of a resin shed?
Typical foundations for a resin shed relate to either a decked wood frame, paving slabs or concrete providing the solid substructure, elevated slightly above the ground to ensure efficient drainage and laid perfectly level to accomplish a flawless shed construction.
What is a plastic shed made of?
The typical plastic shed features single or double layer walls made of flexible polyethylene resin.
What is the best base for a shed?
On top of this, a good concrete, wood, or plastic shed base will help keep your shed up and away from the ground and from the risk of water puddling around the bottom of the walls.
What to do if your shed does not have a floor?
If your shed does not have a built-in floor, this becomes even more of a problem. These sheds require some form of concrete, wood, or plastic shed base that they can be anchored to.
How to keep rainwater from splashing on bottom of shed?
That is unless they gnaw a hole in the floor. If you are using a plastic shed base that forms a grid, the gravel that you place in between the grids will help to keep rainwater from splashing onto the bottom of your shed. This is very important if you have a wood shed as all the water will only serve to accelerate rot.
How to keep a shed watertight?
The only way to actually achieve this is by putting your shed on a good solid foundation such as a plastic shed base.
What happens if you have a metal shed?
If you have a wood or metal shed, the damp from the ground will slowly seep into the wood or onto the metal. This leads to rot and rust that will in time destroy your shed. The more it rains or snows, the more unstable the soil is likely to become, leaving your shed unsafe and insecure.
How big is a 6x6 shed base?
This eight-piece plastic shed base kit can be used to create a base large enough for a 6 x 6 shed. Each square measures approximately 18 x 18 inches.
1. Make sure you have everything you need
In this piece, we’re referring to plastic grid shed bases, which are so called because they are made with interconnecting grids. There are a few brands making products that fit this description, including the Ecobase Fastfit and ProBase plastic shed base.
2. Prepare the ground
This third stage involves preparing the ground – which (like pretty much every stage of the process) is much easier than more traditional methods, such as using concrete slabs or even timber bearers.
3. Lay the weed membrane
To increase the life of your shed, it’s important to lay a weed membrane under the base. As you may guessed from its name, this permeable membrane stops weeds growing under and around your shed.
4. Lay down the shed base kit
In this step, all you need to do is connect the grids together to create a base large enough for your shed. In the case of the Ecobase Fastfit, each grid features clips and grooves which making light work of connecting the grids together. Each grid has a footprint of 500mm x 500mm (approx. 19.7 inches x 19.7 inches).
5. Fill the spaces in the grids with pea gravel
Filling the empty spaces between the plastic in each grid make the base more solid and ensures the base can easily carry the weight of the shed. The pea gravel also helps keep the area from moisture, which aids drainage.
6. Build your shed on top of the plastic base
All that’s left to do now is build your shed on top of the base. If you need help doing that, take a look at our guide to assembling a shed. As you can probably tell, it’s so much easier and faster to install a plastic shed base than it is to lay more permanent structures.
Press Contacts
Imagery, information, ideas, influencers? Please contact [email protected]
What is the best base for a shed?
The plastic pro base is fast becoming the preferred shed base to install. It’s made from recycled plastic, it’s light to carry and put in place, and it’s surprisingly strong too. Let’s see how easy it is to install.
How hard is it to lay a plastic pro base?
As you can see, there is really very little hard work involved in terms of laying the plastic pro base to receive your shed. The hardest part is making sure the ground is level. You may be lucky in already having a level plot to work with, but taking your time in levelling things off is going to pay dividends later.
Why do you need to fill a shed with pea gravel?
There are two reasons for this. Firstly, it looks good and provides a neat finish, rather than leaving the squares empty. Secondly, the drainage properties of the pea gravel mean any rainwater will simply drain through it into the soil beneath. It’s far better than filling the holes with soil, as this will splash back onto your shed and make it look dirty. It may also cause premature rotting at the lower levels. Pea gravel can help prevent this.
Why add pea gravel to a base?
The other situation that may require you to add pea gravel throughout the base is where your ground is of poor quality. The pea gravel will help with drainage and helps establish an even more solid and reliable base.
Can you lay a plastic pro base over a concrete slab?
Prepare the ground. Even this bit is easier with a plastic pro base than it might be if you went for a concrete slab or any other method. This is because you can lay it directly over an existing lawn if you like, or over soil or gravel. Measure out a suitable area, which should be a bit bigger than the total size of the base you’re going to lay. ...
Can you fill the pro base of a shed with pea gravel?
This is the final stage. Once the base is installed, you’re ready to begin building your shed. Incidentally, if you only intend to fill the outer sections of the pro base with pea gravel, you can wait to do this until your shed is erected if you like.
Can you see a plastic shed base?
How to Install a Plastic Pro Base. Even though you won’t really see your shed base, it has a very important role to fulfil. It will ensure your shed is level and safe, and won’t move or rot (assuming you have a wooden shed).
How many types of shed bases are there?
There are 6 commonly used types of shed base. And I'll go over them all here, from the simplest to the most complicated...
Why is it so hard to put together a shed?
The building will be difficult to put together because the different parts won't line up properly . And if you do manage to build it, the wonkiness puts a strain on the joints which will undermine the structural integrity and ultimately shorten the life of your shed.
How does a plastic grid work?
The plastic grid systems involves clicking together different tiles to create a plastic raft onto which you lay the shed. While with the plastic runner systems, you actually clip runners directly onto the beams of the wooden shed floor.
How long do battens last in a shed?
So you'll need to prepare the ground that you put the battens on, so that it's flat. Wooden battens will last for many years. And this is a "tool free" way to make a functional shed base. However, there could be a fair bit of movement as they settle, which could lead to structural issues in the shed over time.
What are shed floor vents made of?
They're free draining and self ventilating, so they do a really good job of keeping your shed floor dry. And they're made from 100% recycled plastic, so you don't have to worry too much about their environmental impact
Why does my shed door shatter?
And if the shed's got windows, the irregular pressures on the frame (caused by the wonkiness), may cause them to shatter!
What happens if you store heavy items in a shed?
If you plan to store heavy items in the shed, they may cause it to sink into the soft ground in places , making the building wonky and structurally unsound.
