- Slip the mower belt off of the front drive wheel pulley with your hands.
- Apply slight pressure to the leveling bracket on one side of the mower and tighten the adjusting nut.
Full Answer
How do I service my John Deere X320 lawn tractor?
Good news is you can easily service your machine yourself using a John Deere maintenance kit or service kits or by getting the specific John Deere part needed to keep your John Deere mower or tractor running for a long time. These are the parts on your John Deere X320 Lawn Tractor & Parts List that need to be regularly serviced.
How much does a John Deere X320 cost?
Lawn Tractors Compare Articles/News Tractor Shows Contact John Deere X320 Overview Engine Transmission Dimensions Photos Attachments 2006 - 2015 Model year 2006-20102011-2015 Select X300 Series Lawn tractor Series: X300← X320 Production Manufacturer John Deere Type Lawn tractor Factory Horicon, Wisconsin, USA Original price $4,099 (2010 )
What are the dimensions of a John Deere X320 snowblower?
Wheelbase 49.4 inches 125 cm Weight 548 lbs 248 kg Front tire 15x6.5-8 Rear tire 22x11-10 Full dimensions and tires ... John Deere X320 attachments 48" mid-mount mower deck snowblower blade Attachment details ... X320 Serial Numbers 2006 010001 2007 040001 2008 085001 2009 120001 2010 150001 2011 180001 2012 220001 2013 250001 2014
Where is the serial number on a John Deere X320?
Serial number tag on the right side of the John Deere X320, above the front axle. Electrical Ground negative Charging amps 15 Battery CCA 160 (early)
See more
How do you level a mower deck on a x320?
0:111:39How to level your mower deck - YouTubeYouTubeStart of suggested clipEnd of suggested clipRaise your deck up to set your desired cut height then lower it once it's set to begin leveling.MoreRaise your deck up to set your desired cut height then lower it once it's set to begin leveling. Make sure gauge wheels are not contacting ground right now then take the blade.
How do I level my John Deere mower deck?
0:352:50How To Level A Mower Deck | John Deere X300 & X500 Lawn Tractor ...YouTubeStart of suggested clipEnd of suggested clipIf necessary raise the mower wheels. Then place the exact adjust gauge under the mower at theMoreIf necessary raise the mower wheels. Then place the exact adjust gauge under the mower at the adjustment point near the left rear corner. The exact adjust gauge should lightly. Contact the deck trim.
Should a mower deck be level front to back?
For most effective results, a lawn mower deck should have a pitch, or height difference of 1/8-inch to 1/2-inch between the front of the deck to the back of the deck.
What is the best way to level a lawn mower deck?
1:392:45Leveling a Riding Lawn Mower Deck for an Even Cut - YouTubeYouTubeStart of suggested clipEnd of suggested clipEach full turn the nut adjust the deck height by 1/8 inch recheck the blade height measurementsMoreEach full turn the nut adjust the deck height by 1/8 inch recheck the blade height measurements after adjustment.
Why does my John Deere cut uneven?
4:238:575 REASONS WHY YOU'RE MOWING UNEVENLY & HOW TO FIX IT YouTubeStart of suggested clipEnd of suggested clipCommon. Reason for those decks being out of level left to right but there's some other reasons thatMoreCommon. Reason for those decks being out of level left to right but there's some other reasons that could also contribute to an uneven cut with your mower deck. So one of the gradual.
Should mower deck be Leveld or sloped?
For most effective results, a lawn mower deck should have a pitch of 1/8-inch to 1/2-inch between the height of the deck rear to the height of the deck front. Naturally, this makes the sweet spot about 1/4-inch of pitch, depending on the type of mower.
Should mower deck wheels touch the ground when mowing?
Mower deck gauge wheels should be properly adjusted to prevent scalping grass on uneven terrain. The bottom of the wheels should sit approximately 1/8-1/2 of an inch from the ground, depending on your cutting height.
Why does my mower leave a strip of grass?
Dull or Damaged Blades Rows or streaks of uncut grass in your lawn may be the result of your lawnmower's cutting blades being dull or otherwise damaged. Dull blades are the result of normal wear and tear from mowing. The blades can be sharpened with a bench grinder by you or a professional.
How do I know if my mower deck is level?
1:379:47Level Your Mower Deck - YouTubeYouTubeStart of suggested clipEnd of suggested clipI just take a tape measure. And i measure. Right in front of the rear tire at the to the top of theMoreI just take a tape measure. And i measure. Right in front of the rear tire at the to the top of the lip on the deck. Now i'll check the right side taking the measurement same way on this. Side. So
Should I mow before leveling?
Yard leveling starts with mowing your lawn. Make sure you cut it short. But be careful not to cut it too short. If you cut to the point that the stems of the blades of grass are visible, then your grass may dry out.
What is the easiest way to level uneven ground?
If you are leveling a small area, you can tamp the soil using your foot and the bottom of your rake. If you are leveling a large area, or it is especially important to keep the ground level (such as if you are building a structure), get a tamper or plate compactor to compact the soil. Let it settle.
What tool do I use to level my lawn?
Lawn roller, rake, and shovel: Use the shovel to dig into low spots and expose the dirt beneath the grass. Fill the divots with topdressing mix, then use the rake or lawn roller to level the lawn. If the uneven areas are large enough, use a tiller to dig them up.
How do I level the deck on my riding lawn mower?
Raise the front of the deck by tightening the inner hex nut. Loosen the inner hex nut to lower the front of the deck. Once the deck is at the proper level, tighten the lock nut to secure. Wearing gloves for protection, level the deck from side to side by rotating the blades perpendicular to the lawn mower.
Should mower deck wheels touch the ground?
Mower deck gauge wheels should be properly adjusted to prevent scalping grass on uneven terrain. The bottom of the wheels should sit approximately 1/8-1/2 of an inch from the ground, depending on your cutting height.
How do I know if my mower deck is level?
1:379:47Level Your Mower Deck - YouTubeYouTubeStart of suggested clipEnd of suggested clipI just take a tape measure. And i measure. Right in front of the rear tire at the to the top of theMoreI just take a tape measure. And i measure. Right in front of the rear tire at the to the top of the lip on the deck. Now i'll check the right side taking the measurement same way on this. Side. So
How often should I level my mower deck?
Common Tags As a general rule, you'll want to level your mowing deck one to two times per season and additionally after coming into contact with obstructions like curbs, particularly if it's been a forceful bump.
Can John Deere X320 be used in garage?
Regardless of your John Deere model, these John Deere parts are used frequently in maintaining and your John Deere X320 Lawn Tractor & Parts List and can be used around your garage.
Can you service a John Deere mower yourself?
While your John Deere machine is certainly built with quality parts, they have a limited life. Good news is you can easily service your machine yourself using a John Deere maintenance kit or service kits or by getting the specific John Deere part needed to keep your John Deere mower or tractor running for a long time.
What is the best tractor to mow a lawn?
If you’re looking for a tractor to mow your 1 to 5 acres of lawn, then JD X320 should be your go-to option. It’s one of the best tractors from the X300 series & you can bet on it with confidence.
What transmission does a John Deere X320 have?
John Deere X320 comes with the Tuff-Torq K58 transmission. This transmission is slightly better than the K46 that has a life of 900 hours. So, you can imagine why your transmission went dead.
What is a John Deere X320?
John Deere X320 is the first lineup of JD’s X300 series with two-wheel steering. This lawn tractor is all you need when it comes to mowing the lawn smoothly & effectively.
What is a John Deere X320 controller problem?
Losing the controller module is one of the most common problems of John Deere X320. Replace the controller module & this problem should be fixed.
Why won't my car start if the plugs fail?
Spark helps the engine to start. It’s more like the engine is absorbing plug sparks’ heat to get into work.That’s why if the plugs fail to produce sparks – your engine won’t start either.
How long does it take for a transmission to die?
Almost every user will face this transmission problem sooner or later. You may find your transmission dead after mowing for 700 to 900 hours.
How to check for oil in carburetor?
You’ve to check for oil in your carburetor. Remove the dipstick & search (smell) for oil. You may detect the smell of gasoline while inspecting. Now, drain the oil if possible.
What transmission does a John Deere iTorque have?
This model also comes equipped with a hydrostatic transaxle.
What causes a John Deere D140 to start?
A dirty air filter or fuel filter could also cause this issue. Lastly, a dead battery could cause power issues. These symptoms are true for the John Deere D140 mower’s starting problem as well.
How to fix a popped ball joint?
Fix the popped ball joint by loosening and affixing the nut holding it in place. These common fixes usually sort steering issues.
How to fix transmission issues on X320?
There are a few steps to fix transmission issues in your X320. Firstly, if the seals are worn out, replace them. This would minimize the loss of power.
Why does my JD LT155 lose power?
The seals in the piston pump of the transmission could wear out over extended use. This would cause the transmission to lose power. Many people faced this problem with their JD LT155 mower too.
What is the carburetor on a X320?
The carburetor is the device that helps with the internal combustion of liquid fuel and air in the engine . This kind of fuel injection technology is seen in X320’s engine as well.
Why is steering important?
The steering is a crucial part as it lets you control your movements with precision. However, overuse or due to difficult circumstances or terrain, it is not uncommon to face problems.
