- Turn the gas valve and temperature gauge to the OFF position.
- Plug the deep fryer into the gas tube. ...
- Set the gas valve to position PILOT.
- Hold the control pushbutton in the ignition position or press the electronic ignition. ...
- Allow the pilot to burn bright for at least a few minutes.
How do you light a gas deep fryer?
0:422:32How To light a propane commercial deep fryer in a food truck - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we're gonna turn deep fryer number one on see the valve is straight up and down so the gas is.MoreSo we're gonna turn deep fryer number one on see the valve is straight up and down so the gas is. Off. Now we got the. So all the gas is on the first thing you want to do just come over here. This
How do you start the pilot on a fryer?
1:192:42How to Start a Pitco Gas Fryer - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst turn the pilot knob to the pilot position and push. And hold it in for 15 to 30 seconds.MoreFirst turn the pilot knob to the pilot position and push. And hold it in for 15 to 30 seconds.
How do you turn a deep fryer on?
0:031:01How to turn on your regular 40 lb Commercial Fryer - YouTubeYouTubeStart of suggested clipEnd of suggested clipTurn your knob to the pilot. Position pushed in and you light your pilot. You hold that knob for aMoreTurn your knob to the pilot. Position pushed in and you light your pilot. You hold that knob for a minute or two. And when it stays on in the pilot position you release you turn your knob.
Why is my deep fryer not heating up?
The Pilot Light Is Out. When the Pilot Light is out, it's usually a sign that your deep fryer is completely out of commission. Without it, the oil will not heat up to its correct temperature. While there are many reasons that might cause a faulty Pilot Light, the most common culprit is the main gas supply valve.
How do you relight a fryer?
0:060:36FRYMASTER 101: How to light a Master Jet fryer - YouTubeYouTubeStart of suggested clipEnd of suggested clipTurn the gas valve knob to pilot and press in when the pilot lights air in the gas lines could delayMoreTurn the gas valve knob to pilot and press in when the pilot lights air in the gas lines could delay the ignition. Continue to hold for 60 seconds.
How do I light the pilot on my Imperial oven?
0:061:13How to light pilot on new imperial thermostat with combined safty ...YouTubeStart of suggested clipEnd of suggested clipFollow the pilot line up into the unit. And light it with a stick lighter. You'll get a pilot flameMoreFollow the pilot line up into the unit. And light it with a stick lighter. You'll get a pilot flame lit.
How do you light an outside fryer?
0:241:39Turkey Fryer Lighting Instructions - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere you go yeah hold the button hold a button hold the button yep.MoreThere you go yeah hold the button hold a button hold the button yep.
How long does a deep fryer take to heat up?
Approximately 30 minutes. Be sure the lid is on the fryer to help speed up the process. Use good quality oil with a smoke point of 400°f or higher. Vegetable, corn, canola, soybean, or peanut oils are safe to use.
How do I reset my deep fryer?
1:443:04Lincat electric fryers reset operation - YouTubeYouTubeStart of suggested clipEnd of suggested clipEach heating element has its own red reset button with all the electric fryers. If you find you haveMoreEach heating element has its own red reset button with all the electric fryers. If you find you have a need to continually resort to pressing the reset button.
How do you troubleshoot a fryer?
1:265:10How to Fix Commercial Fryers | eTundra - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe problem of your thermostat being off from the actual fryer oil temperature. The first place toMoreThe problem of your thermostat being off from the actual fryer oil temperature. The first place to look is your high limit switch. And what the high limit does is a safety precaution.
What are the common problems occurs when deep frying?
7 common mistakes that people make while deep frying01/8Mistakes people make while deep frying. ... 02/8 Frying at a high temperature. ... 03/8Opting the wrong oil. ... 04/8 Excess frying. ... 05/8 Frying at too low temperature. ... 06/8Frying big pieces. ... 07/8Wrong batter/mixture ratio. ... 08/8Using leftover oil.
How do you test a fryer thermostat?
0:432:02How to test a fryer RX thermostat tutorial DIY Windy City Restaurant ...YouTubeStart of suggested clipEnd of suggested clipPut your two leads on both the terminals of the thermostat. You should not get a tone you should notMorePut your two leads on both the terminals of the thermostat. You should not get a tone you should not read any resistance. But when you turn the fryer on.
How do you light the pilot on Avantco fryer?
Push and hold the knob in. Light the PILOT with a lighted flame while continuing to depress the gas control valve. Continue to depress the knob until PILOT remains lighted once knob is released.
How do you light a pilot light on a pitco fryer?
0:341:39How to Light a Pitco Millivolt SG Fryer Pilot - YouTubeYouTubeStart of suggested clipEnd of suggested clipPosition push the valves button and hold it for about 15 to 30 seconds. Continue holding the gasMorePosition push the valves button and hold it for about 15 to 30 seconds. Continue holding the gas valves button while using a barbecue lighter to light the pilot. You should see a blue flame appear.
How do you light the pilot on a Vulcan fryer?
2:069:10How to Operate Your Vulcan LG, GR or VEG Fryer - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhile still holding the knob in light the pilot with the lid flank continue to push in the knobMoreWhile still holding the knob in light the pilot with the lid flank continue to push in the knob until the pilot remains lit when the knob is released.
How does a gas fryer work?
A commercial gas fryer heats oil with a burner powered by natural gas or liquid propane. The gas flame heats the burner beneath or on the sides of the frypot.
Where is the rating plate on a fryer?
The rating plate is located on the inside of the door.
Why is ventilation important in a fryer?
Proper ventilation is very important for the proper function of your fryer as well as to remove unwanted vapors and products of combustion. To keep your warranty in force, a proper ventilation system must be employed.
What is the fuel code for a fryer?
The installation of the fryer must conform with local codes, or in the absence of local codes, with the National Fuel Code, ANSI Z223.1/NFPA 54, the National Gas Installation Code, CSA B149.1, as applicable.
Can you put a fryer next to a broiler?
DO NOT install the fryer next to any open flame section of a broiler, range or any other appliance. The fryer should be placed in an area which is free from drafts and accessible for proper operation and servicing. The area around the fryer must be kept clear of combustible materials.
How to relight a pilot on a gas stove?
Be sure to set the thermostat to the "off" position and wait 5 minutes before attempting to relight the pilot. 1. Hold down the red button on the gas safety valve to release gas. 2. Light pilot by pushing the red ignitor button. You may need to press it more than once.
What to do if pilot lights are out?
If all pilot lights are out on your equipment, turn on your ventilation hoods, check your gas line, and vent the area. If you smell a strong gas odor or suspect you have a gas leak, contact your gas provider immediately. Do not light a flame or turn on an electric switch until the problem is addressed. With these instructions, you can learn how ...
