How do you light a montigo fireplace? Steven Fiorini | Faq To light the pilot we recommend the use of a long match or removal of log“C”, “F”, “G”: a) Partially depress and turn dial on gas control valve to “OFF” position and wait 5 minutes. b) Turn dial to pilot position, depress dial and light pilot burner, hold for 1 minute, then release.
How do you light the pilot on a gas fireplace?
The pilot position is typically set on the control dial with either the dial depressed and turned, or used with a separate spark button to light the pilot flame. The manual controls for a gas fireplaces will typically have a ‘Pilot’ position that that allows the pilot light to be started.
Why choose a Montigo gas fireplace?
Congratulations on your purchase of a Montigo Fireplace. With over 30 years of experience, Montigo is committed to providing you with a gas fireplace that is not only a beautiful addition to your space, but that is also designed and manufactured to the highest safety, reliability and engineering standards.
How do I isolate the gas supply from my gas fireplace?
The gas supply should also be isolated by turning the gas valve located near to or within the fireplace to the off position. For our gas fireplace, we simply need to the turn the control dial from the ‘On’ or ‘Pilot’ position clockwise through to the ‘Off’ position located at 12 O’clock.
What should I do if my gas fireplace is smoking?
• An inspection of the gas valve, gas components, and pilot flame. For your convenience a 1/8" manifold pressure tap is supplied on the gas valve for a test gauge connection. • Always keep the fireplace area clear and free of combustible materials, as well as gasoline and other flammable vapors and liquids.
How do I light the pilot on my gas fireplace?
0:131:17How To Light a Pilot in a Gas Fireplace - YouTubeYouTubeStart of suggested clipEnd of suggested clipUntil you see the flame light up inside the actual fireplace itself keep holding down that pilot theMoreUntil you see the flame light up inside the actual fireplace itself keep holding down that pilot the entire time and we're going to hold that down for several seconds so the pilot sensor.
How do I turn on my fireplace light?
1:223:46How to light the pilot on a gas fireplace - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you look up in here I can hit the seal a little spark. There we go three clicks. Now I hold downMoreIf you look up in here I can hit the seal a little spark. There we go three clicks. Now I hold down I continue to hold down. This for about a minute now.
How do you manually light a fireplace?
0:401:40How to Manually Light a Gas Fireplace - YouTubeYouTubeStart of suggested clipEnd of suggested clipLight this match. And place it as deep into the fireplace. Keep a couple of matches. As. I can whereMoreLight this match. And place it as deep into the fireplace. Keep a couple of matches. As. I can where I know the gas is going to move over the lighter alright it's burning.
How do you turn off a montigo fireplace?
Turn On the Fireplace With the system Off, turn the manual On/Off switch to on and press the On/Off Key on the Remote Control. The manual On/Off switch is located on the right side of the fireplace under the valve blind cover.
Why isn't my gas fireplace lighting?
Check Your Igniter and Thermocouple If nothing is blocking the tubing, and gas is flowing out, there might be something wrong with the spark igniter and thermocouple. Make sure there's no debris lodged between the two. If the pilot light ignites but doesn't stay lit, you might need to replace the igniter.
Should the pilot light always be on in a gas fireplace?
We recommend that you turn off your gas fireplace pilot light seasonally. Turning off your gas fireplace's pilot light can save a substantial amount of energy and money. It is important to remember that not all gas fireplaces have “standing” pilot light, or, a pilot light that is “always on”.
How can I light my fireplace without ignitor?
4:167:30How to light a Gas Fireplace pilot light with no ignitor - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis button right here it's on P for pilot. So I'm gonna hold it down you'll hear the gas. Okay soMoreThis button right here it's on P for pilot. So I'm gonna hold it down you'll hear the gas. Okay so you're supposed to hold it down for a little while. And then turn it to the on. Position.
How do you get a gas fireplace to work?
Turn the knob from the “Off” to the “Pilot” position. Push in the pilot knob, which manually sends gas into the system. Push the igniter button once every second until it lights. Depending on how long it's been since the gas fireplace was last used, ignition may take multiple attempts.
Can I use a lighter to light my gas fireplace?
You will need a long lighter to ignite the burner. A BBQ skewer is a great tool to light your fireplace burners safely. First, ignite the fireplace burner with your long lighter. Then, turn the gas valve key counterclockwise while holding the flame up to the burner.
Should I turn off the pilot light on my gas fireplace in the summer?
In general, we suggest homeowners turn the gas pilot light off for the spring and summer months, but if you prefer to keep it on, you likely won't notice any significant changes in your monthly energy bills or home comfort.
Do gas fireplaces turn off automatically?
Most new gas fireplaces have a safety shut-off valve if the pilot light goes out. So if you have a new gas fireplace, the chances are that it has this feature. In addition, a lot of these newer gas fireplaces have an automatic gas shut-off if the fireplace gets too cold or if there is a carbon monoxide build-up.
How do you start a gas fireplace with a key to the wall?
0:322:46How To Light A Gas Fireplace In Your Home - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo this is where you stick your extended lighter in and light it right there. And then it will flameMoreSo this is where you stick your extended lighter in and light it right there. And then it will flame up.
How do you light a pilot light?
Turn the valve to the “pilot” position. Press and hold the reset button. If the reset button fails, ignite the lighter. Hold down the reset button and bring a grill lighter or long match to the pilot light valve until the pilot ignites.
How do you start an indoor fireplace?
Start by placing two pieces of firewood on the grate in your fireplace. Now crumple newspaper, which is your tinder, and place it between the firewood. Place the kindling on top. Add one or two more pieces of firewood on top of the other logs, and be sure to leave enough room for air to circulate around the logs.
How do you use an indoor fireplace?
Light the top of the stack with a single match. The fire should travel down, igniting the pieces underneath without prompting. Let the fire burn for as long as you'd like. Don't close the damper until the fire is completely out and all the embers have stopped burning.
How does a gas fireplace wall switch work?
The wall switch sends an electrical signal to your fireplace to open a valve and release the gas for the pilot light to light it. Without power most fireplace valves will not open.
What is the best way to restrict access to a fireplace?from montigo.com
A physical barrier is recommended if there are at-risk individuals in the house. To restrict access to a fireplace or stove, install an adjustable safety gate to keep toddlers, young children, and other at-risk individuals out of the room and away from hot surfaces. CAUTION.
What is the clearance for a Montigo flue gas box?from montigo.com
SECTION C-C !IMPORTANT! Maintain at least 1.00" clearance to combustibles all around the Flue Gas Box This flue gas box is only to be used with Montigo fireplace systems specifically approved by Montigo
Where is the power vent located?from montigo.com
Positioned on the outside of the building wall, this vent protrudes from the wall and blows flue gas perpendicular to the wall (see Figure A in the Power Vent Guide for placement requirements)
How to make a claim on Montigo?from montigo.com
To make a Commercial claim under this warranty, you must first contact Montigo via email at [email protected] or by phone 1 (800) 378-3115 and please state that this is a Commercial claim inquiry. Montigo will perform an initial assessment and provide next steps in conjunction with your installing dealer. Ensure you have your sales receipt or purchase order and the model and serial number of your appliance.
How many layers of glass are in a Prodigy fireplace?from montigo.com
The Prodigy fireplace has 2 layers of glass that must be removed for maintenance and cleaning. Remove the glass as follows:
How to clean a fireplace glass?from montigo.com
1) Inspect and operate the pressure relief mechanism to verify relief mechanisms are free from obstruction to operate. 2) Clean glass window with a suitable fireplace glass cleaner. Abrasive cleaners must not be used. Be careful not to scratch the glass when cleaning.
Does Montigo have a warranty?from montigo.com
The Montigo warranty will be voided by, and Montigo disclaims any responsibility for, the following actions: • Modification of the fireplace and/or components including Direct- Vent assembly or glass doors. • Use of any component part not manufactured or approved by Montigo in combination with this Montigo fireplace system. • Installation other than as instructed in this manual. • Consult your local Gas Inspection Branch on installation requirements for factory-built gas fireplaces. Installation & repairs should be done by a qualified contractor.
Does Montigo have a warranty?
The Montigo warranty will be voided by, and Montigo disclaims any responsibility for, the following actions: • Modification of the fireplace and/or components including Direct- Vent assembly or glass doors. • Use of any component part not manufactured or approved by Montigo in combination with this Montigo fireplace system. • Installation other than as instructed in this manual. • Consult your local Gas Inspection Branch on installation requirements for factory-built gas fireplaces. Installation & repairs should be done by a qualified contractor.
What does "hazardous" mean in a sentence?
Indicates a hazardous situation which, if not avoided, WILL result in death or serious injury or property damage. Indicates a hazardous situation which, if not avoided, WILL result in minor or moderate injury. Indicates a hazardous situation which, if not avoided, COULD result in death or serious injury or property damage.
How to clean a fireplace glass?
1) Inspect and operate the pressure relief mechanism to verify relief mechanisms are free from obstruction to operate. 2) Clean glass window with a suitable fireplace glass cleaner. Abrasive cleaners must not be used. Be careful not to scratch the glass when cleaning.
What is the best way to restrict access to a fireplace?
A physical barrier is recommended if there are at-risk individuals in the house. To restrict access to a fireplace or stove, install an adjustable safety gate to keep toddlers, young children, and other at-risk individuals out of the room and away from hot surfaces. CAUTION.
When using dimensional lumber to build fireplace framing, must wood studs be completely dry, sound and straight?
When using dimensional lumber to build fireplace framing, wood studs must be completely dry, sound and straight. Ignoring recommendation will cause stress point formations and potential cracks in finishing materials
When to label wires before disconnection?
Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing
Is non-combustible framing required for all Distinction models?
Non-combustible framing is required for all Distinction models.
Is There A Pilot Light On A Gas Fireplace?
Pilot lights are typically found inside gas fireplaces. The use of a pilot light helps to make the lighting of the main burner flames more efficient and effective. Pilot lights are a tried and tested component and have been incorporated into gas fireplaces for decades.
What Is A Gas Fireplace Pilot Light?
A gas fireplace pilot light is a small part that can be found as part of the ignition system for the fireplace and creates a smaller flame that’s used to help light the main flames generated by the larger burner. This pilot flame is required every time when lighting the main burner flames in a gas fireplace.
What Is The Pilot Position On A Gas Fireplace?
The pilot position on a gas fireplace is the position on the fireplace controls that is used to start the pilot flame. The pilot position is typically set on the control dial with either the dial depressed and turned, or used with a separate spark button to light the pilot flame.
What Happens If The Pilot Light Goes Out On A Gas Fireplace?
If the pilot light goes out on a gas fireplace the thermocouple and/or thermopile will help to shut off the gas supply. A pilot can be re-lit once it goes out but for gas fireplaces with standing pilot lights this re-lighting process may have to be undertaken after a short period of time.
Does A Gas Fireplace Pilot Light Use Much Gas?
The pilot light on a gas fireplace will use much less gas compared to the main burner. For electronic ignition gas fireplaces the pilot will turn off when the main burner is turned off. Gas usage for a standing pilot lights are small but can add up over time.
