How to Light the Pilot on a Furnace (Old One)?
- First Step: Turn Off the Gas You’ll need to first set the thermostat to heat mode. Then locate the gas valve. ...
- Second Step: Locate the Pilot Tube You’ll see this near the furnace. After that, find the valve of the system. ...
- Third Step: Ignite It’s time to ignite the standing pilot. ...
- Final Step: Move the Gas Valve to On Now start to release the button. ...
What to do when pilot light goes out on furnace?
- Turn off your gas valve and wait about 3 minutes
- Switch the valve to ‘pilot’ and press your ‘reset’ button down
- With reset pressed down, hold a lit match into the pilot light aperture until the pilot light ignites
- If it doesn’t stay lit, then you may need to do some troubleshooting from our steps or contact a local professional to help
What makes a pilot light go out on a furnace?
Your pilot light might be going out on your furnace because:
- Your furnace’s thermocouple is dirty.
- There is incorrect air flow to your furnace.
- There is an issue with the gas connection.
What causes pilot light to go out on furnace?
What Causes A Pilot Light To Go Out?
- There could be a Draft. If your pilot light seems to go out overnight fairly often, and lately, it’s been very windy, you might have a draft issue.
- Dirt in the Pilot Orifice. Try lighting your pilot and once it ignites, take a look at the color of the flame. ...
- Gas Regulator could need Replacing. ...
- The Thermocouple is having Issues. ...
Where is a pilot light located on a furnace?
The pilot light is located within the burner assembly inside your furnace. To access it, remove the access cover to access the burner assembly. Then look toward the bottom. You’ll see a dial (usually red) that says “ON,” “OFF,” and “PILOT.” This is the gas valve knob we mentioned earlier.
What to do if pilot light isn't lit?
Why does my furnace have a pilot light?
How long to wait after turning off a pilot?
Can you relight a furnace pilot?
Where is the pilot light on a furnace?
Can you relight a pilot light on a gas furnace?
Can you add videos to your watch history?
See 2 more
Where is the reset button on a wall furnace?
All furnaces are outfitted with a reset button. They are typically red or yellow and are located inside the blower area. It's not unusual for a heating system to call for resetting once in a while.
How do you light a wall mounted gas heater?
0:481:36How to Light Your Gas Heater - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhat you want to do is turn it to pilot position press and hold how'd you do that get your igniter.MoreWhat you want to do is turn it to pilot position press and hold how'd you do that get your igniter. As soon as it lives keep holding your button down on pilot. For at least 20 seconds.
How do you start a wall furnace?
0:245:36How to light and operate a gas wall heater - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd this arrow you're going to turn it to the pilot. Pilot okay all the way to pilot. And i'm goingMoreAnd this arrow you're going to turn it to the pilot. Pilot okay all the way to pilot. And i'm going to try to do this with one hand here and hold the camera.
Can I light my own pilot light on my furnace?
Once the gas has had time to dissipate, turn the knob to "Pilot." Then, hold down the "Reset" button and bring the flame of a long lighter close to the pilot light opening. This should light the furnace pilot light. Once you are sure the pilot light is on, release your pressure on the reset button.
Where is the pilot on a gas wall heater?
If you have a vented wall heater or wall furnace, open the cover at the base of the heater to locate the control and pilot. The control knob is right in front of you, but you may have to search a bit for the pilot orifice because it's hidden inside the burner assembly.
Why is my gas wall heater not working?
If your heater's not working at all, check for a tripped breaker or blown fuse. Reset the breaker or replace the blown fuse, if necessary. If the problem isn't with the breaker box, examine the unit's wiring for loose connections.
What is the difference between a wall heater and a wall furnace?
Also called wall heaters, wall furnaces are self-contained, compact heating units permanently mounted in or on the wall of a building and vented directly through the wall or roof. Often producing warmth by burning fuel, but occasionally powered by electricity, these units circulate air inside a sealed internal chamber.
How does a gas wall furnace work?
A direct-vent wall furnace is a self-contained sealed combustion heating appliance that warms inside air by recirculating it around a sealed chamber, and discharges combustion byproducts outside the home via direct-vent. They are permanently attached to the structure of a building, and are not connected to ductwork.
How do you light a pilot light on a Williams wall heater?
0:081:06Turning on Pilot Light to Williams Propane Heater - YouTubeYouTubeStart of suggested clipEnd of suggested clipLet's turn it on down the lid we're gonna take this knob push it in turn it till it stops. And I'mMoreLet's turn it on down the lid we're gonna take this knob push it in turn it till it stops. And I'm gonna push that red button until it clicks. And the pilot light starts.
Is it safe to relight a pilot light?
Most homeowners can relight a pilot light themselves without any issue, but it's important to be safe when dealing with a gas-powered hot water heater. You should always proceed with care when relighting a pilot light, since the gas used to power your hot water heater is flammable and potentially dangerous.
What does a pilot light look like on a furnace?
The pilot light is a small, blue flame that is used to ignite the natural gas being pumped into the main burner.
How do I know if my furnace pilot light is out?
How to Tell If the Pilot Light Is OutLocate the front cover panel on your furnace. It should be a little door that's easily visible. ... If your pilot light is on, it should be easy to see – your eyes will be drawn to the little flame.If you don't see a flame, your pilot light is out.If there is a flame, check the color.
How do you light the pilot on a gas heater?
0:001:25How To Light The Pilot Light On A Gas Heater - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe pilot button down for at least a minute to heat up the sensor.MoreThe pilot button down for at least a minute to heat up the sensor.
How do you turn on an old gas wall heater?
Locate the pilot light vent's location. Push down on the selector dial to generate a small flow of gas. Ignite the pilot light with a long match or a long-barrel lighter. Once the pilot light is lit, turn on the heater and verify that it's working.
How do you light a gas heater with electronic pilot?
Hold down the reset button and bring a grill lighter or long match to the pilot light valve until the pilot ignites. Once the pilot light stays lit, turn the valve to the “on” position. You should hear the furnace activate.
Why does my gas heater not ignite?
If your furnace won't ignite, the source of the issue may be a broken flame sensor. The sensor is responsible for turning off the gas burners to avoid gas buildup. Once this component starts to malfunction, it may stop the burners from igniting altogether.
What to do if pilot light isn't lit?
What to Do If Your Furnace Pilot Light Still Isn’t Lit. If your furnace pilot light isn’t lit after following the five steps above, try again. If it doesn’t light after a second try, or it doesn’t stay lit after releasing the reset button, your unit may require additional maintenance. It may be time to repair or replace your furnace, ...
Why does my furnace have a pilot light?
If you have an older furnace or a gas heating system, it probably has a pilot light. That’s the small blue flame that lights the natural gas coming from the unit’s main burner. This pilot light can go out for a variety of reasons, literally leaving you in the cold.
How long to wait after turning off a pilot?
After switching the pilot off, you should always wait at least five minutes prior to restarting to avoid starting a fire or causing injury to yourself or others. Then, switch it to “pilot.”. 5. Relight the Pilot Light. Next, locate the reset button, which should be near the on/off switch.
Can you relight a furnace pilot?
Although it's easy enough to relight your furna ce pilot or perform simple maintenance such as filter changes, repairs or replacement of this appliance should be handled by a skilled professional.
Where is the pilot light on a furnace?
If you’ve read the unit’s instructions, you probably already know where the pilot light is located. Otherwise, check near the bottom of the furna ce for a switch or knob, which should have three indicators: pilot, on and off.
Can you relight a pilot light on a gas furnace?
In fact, you can relight a pilot light on most gas furnaces easily and safely. Follow these steps.
Can you add videos to your watch history?
Videos you watch may be added to the TV's watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.
Is It Possible to Lighting Furnace Pilot Light at Home By Myself?
Many home-owners don’t know whether it’s safe to turn on the pilot light by themselves or not. If you’re an expert in dealing with furnaces, you should only then try to turn on the pilot light of the heating system. Otherwise, you should never try lighting the pilot. Again, while lighting the pilot lights, you’ll have to make sure that you follow all the instructions and steps properly. However, if you’re not an expert or don’t know how to use a pilot light, call your near HVAC professional.
What is the purpose of a thermocouple?
The thermocouple is an important device and plays an important role in lighting furnace pilot light. It is generally situated near the bottom of the flame of the burner and when the thermocouple is lit, the pilot light gives instructions to the thermocouple to keep the gas line on. But when you have a dirty thermocouple, the thermocouple won’t be able to receive instructions properly and as a result, the pilot light won’t turn on. That’s why it’s important to keep the thermocouple clean.
Why does my furnace pilot light go out?
This type of problem is usually seen in older burners and this may lead to frequent pilot light go out. When burners have a crack in the heat exchanger, they’ll put a negative impact on the air pressure and ventilation in the gas burner. Eventually, this will put a negative effect on the flame as well. That’s why as soon as you find out that your furnace has a cracked heat exchanger, call your near HVAC professional and fix it quickly.
What is the flame light on a gas furnace?
On the other hand old furnace have a standing pilot flame. In these old gas furnace systems, the flame light is a small ignition and situated under the gas furnace.
What to use to light a flame without a lighter?
If you don’t have a long match or lighter to ignite the flame, use tightly rolled paper. A tightly rolled paper is a great alternative to a long match or lighter. You can easily light the flame without the use of a lighter or match. But while doing so, you need to position yourself at a safe distance from the pilot light.
How to reset a standing pilot?
It’s time to ignite the standing pilot. Get a lit match and position it to the tip of the pilot. After that get the reset button. Now, hold the button in that position for 30 to 40 seconds.
Where is the reset button on a furnace?
Now, look for the reset button on the system. You’ll find the reset button on the furnace and usually, this button is located near the pilot light.
How to light pilot light on furnace?
If you can’t find the ignition button, check the instruction sticker on your furnace or the the owner’s manual. The ignition button will usually will have a small red button next to it. Press the small button while you press the electric ignition. The pilot light should light, but keep holding the small button down for about a minute.
How long does it take for gas to dissipate in a furnace?
Turn off the furnace and wait five minutes for the gas to dissipate. Find the switch near the bottom of your furnace, which normally says “pilot,” “on” and “off.”. Once you’ve turned it off, you have to wait for five minutes so that all the gas can dissipate. Otherwise, it could be dangerous to try and relight the pilot light.
How to tell if a pilot light is out?
If it's on, you should be able to see a small flame . Your pilot light might have gone out from a draft, and you’ll need to relight it to get your furnace working again.
Why won't my furnace start in the winter?
You go to turn on your furnace on a cold winter day and it doesn’t start. A lot of older furnaces have this problem, because the pilot light will go out. There’s no need to shiver or call someone in to make repairs, because lighting your furnace is a simple task anyone can learn. Soon you'll be warm and cozy again.
How many times do you light a pilot?
You may have to try to light the pilot two or three times.
What happens if the pilot light goes out?
If the pilot light goes out, the pilot light opening might be clogged. To clean it, you can turn off the gas, wait five minutes, and then clean the opening with fine wire. If it’s still not working even after you’ve lit the pilot light, then something else is wrong with it.
Is WikiHow a copyright?
All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not</b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website.
Why does my furnace pilot light go out?
A number of things can make an old furnace pilot light go out, including a strong draft, a faulty thermocouple or a loss of gas. When the pilot goes out, you may need a service pro to determine and fix the cause, but if you're fairly sure the gas is flowing and everything is working normally, you can relight the pilot yourself.
How to keep a furnace from wearing out?
The controls on older furnaces tend to wear out. Push the ignite button repeatedly if the furnace has one. Otherwise, hold a match or lighter close to the pilot tube orifice. Keep pushing in the control knob for about 20 seconds after the pilot lights.
What does the red button on a furnace mean?
Advertisement. If you see a red button next to or under the gas control knob, the furnace has a spark ignitor. If you don't see this knob, you'll need a long match or a long-barreled lighter to start the pilot.
What is the pilot tube on a gas burner?
The gas control is a knob with an arrow on it, and the pilot tube is a thin copper tube that extends from the control box to the burner system. You'll see another tube that also begins at the gas control and terminates close to the pilot orifice. That's the thermocouple. Advertisement.
Can you use a pilot light on a furnace without a sealed compartment?
Even though the pilot compartment is sealed, you use the same procedure for relighting the pilot that you use for a furnace without a sealed compartment.
Can you light a pilot on a gas furnace?
Modern furnaces tend to have an electronic igniter or a hot surface igniter, and the pilot compartment is sealed, so you couldn't light the pilot with a match even if you wanted to. Many electronic igniters and hot surface igniters come on automatically, and if the furnace isn't working, ...
Do furnaces have push button igniters?
Manual pilot lighting isn't totally a thing of the past; some modern furnaces still have push-button spark igniters. Even though the pilot compartment is sealed, you use the same procedure for relighting the pilot that you use for a furnace without a sealed compartment. Advertisement. references.
How to find pilot light on gas furnace?
To locate the pilot light on a gas furnace, you first have to remove the access cover, which usually just lifts off. Once you've exposed the furnace burner assembly, look toward the bottom and you should see a dial (usually red) with markings on it that say "on, "off" and "pilot.".
How long to wait to relight a pilot light on a furnace?
Advertisement. Turn the gas control dial to "off" and wait five minutes.
What to do if your furnace is running on propane?
If your furnace runs on propane, check the gauge on the propane tank to make sure the tank isn't empty. If you have gas, the problem is probably an obstruction in the pilot tube, and unless you're comfortable working around furnaces (which you probably aren't since you didn't know where the pilot was), call a furnace repair specialist.
What happens if a pilot doesn't stay lit?
If the pilot comes on but won't stay lit no matter how long you hold in the dial, the thermocouple needs to be tested and replaced if it's bad. This is probably another job for which you'll want to call a service pro.
Can you relight a pilot on a furnace?
However, it may be the case that your furnace is a reliable workhorse that has far outlived its life expectancy and your attitude being not to fix what isn't broken, you've never had the opportunity to relight the pilot. On the other hand, you may have moved into a house with an older furnace, and you want to be prepared for problems as winter approaches. Never fear — if the furnace has a pilot, it's easy to find, and relighting it is no problem.
Where is the pilot tube on a thermocouple?
One is the pilot supply tube itself, and the other is the tube for the thermocouple, which is placed right next to the pilot orifice. If the pilot is burning, you should see a small blue flame burning at the end of the pilot tube, which extends into the burner housing. If the pilot isn't burning, you may need a flashlight to see the end ...
Do furnaces have pilot lights?
They were common on older furnaces, but because they waste gas, they have largely been replaced with more efficient, easy-to-replace electronic ignitors. If you purchased your furnace within the last 15 to 20 years, you're unlikely to find a pilot light. Advertisement.
What to do if pilot light isn't lit?
What to Do If Your Furnace Pilot Light Still Isn’t Lit. If your furnace pilot light isn’t lit after following the five steps above, try again. If it doesn’t light after a second try, or it doesn’t stay lit after releasing the reset button, your unit may require additional maintenance. It may be time to repair or replace your furnace, ...
Why does my furnace have a pilot light?
If you have an older furnace or a gas heating system, it probably has a pilot light. That’s the small blue flame that lights the natural gas coming from the unit’s main burner. This pilot light can go out for a variety of reasons, literally leaving you in the cold.
How long to wait after turning off a pilot?
After switching the pilot off, you should always wait at least five minutes prior to restarting to avoid starting a fire or causing injury to yourself or others. Then, switch it to “pilot.”. 5. Relight the Pilot Light. Next, locate the reset button, which should be near the on/off switch.
Can you relight a furnace pilot?
Although it's easy enough to relight your furna ce pilot or perform simple maintenance such as filter changes, repairs or replacement of this appliance should be handled by a skilled professional.
Where is the pilot light on a furnace?
If you’ve read the unit’s instructions, you probably already know where the pilot light is located. Otherwise, check near the bottom of the furna ce for a switch or knob, which should have three indicators: pilot, on and off.
Can you relight a pilot light on a gas furnace?
In fact, you can relight a pilot light on most gas furnaces easily and safely. Follow these steps.
Can you add videos to your watch history?
Videos you watch may be added to the TV's watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.
