How to Light/Use a Wood Fired Hot Tub
- Step 1 — Clean the area Clean the surrounding area. ...
- Step 2 — Fill the tub with water This is an obvious. ...
- Step 3 — Start your fire Wood burning hot tubs have efficient stoves. ...
- Step 4 — Circulate smoke ...
- Step 5 — Take a bath
- Step 6 — Closing it Down ...
- Frequently Asked Questions ...
Full Answer
How long does it take to heat up a spa?
How far down should the water level be in a tub?
Can you put cold water in a wood fired hot tub?
How long does it take to heat up a spa?
First of all, you need to plan when you want to start bathing and prepare your outdoor SPA accordingly. Usually, it takes 1-2 hours to heat up the water in summer, and 3-4 hours in the cold season.
How far down should the water level be in a tub?
The water level should reach 4-8 inches (10-20 cm) below the top ridge of the tub.
Can you put cold water in a wood fired hot tub?
In case the water gets too hot, open the lid of your wood fired hot tub, and you can even add some cold water to make the temperature comfortable for your body.
How do I use a wooden Hot Tub?
The wooden hot tub is meant for outdoor usage for all year round. It can be used with warm or cold water. Many people heat the hot tub and sauna at the same time and use both alternately.
How do I have to maintain my pure wooden Hot Tub?
After having emptied the Hot Tub please clean the Hot Tub with clear water. The inner part can be cleaned by means of a brush or a high-pressure cleaner.
How long is the operating life expectancy of a Hot Tub?
It is recommended to clean the inner part with soap, soda supplements or similar supplements and a brush. This prolongs the life expectancy substantially from up to 10 – 15 years.
Is it complicated to set up a Hot Tub when purchasing an assembly set?
The individual wood building components have to be matched together what in turn is not complicated – based on the tongue and groove principle. However, some tools and time is needed to do so. Several building components are already pre-assembled.
How does a Hot Tub function?
The best way is to use a garden hosepipe in order to fill the tub with water up to 4/5 scale. Over the stove surface has to be at least 3 cm water when the heater is installed in the inner of the tub.
How can I empty the wooden bath barrel?
The Hot Tub has a drain or a plug. A hosepipe can be installed and an outlet valve. This enables to direct the water to a specific place (for example, for watering your garden).
What is a hot tub made of?
The traditional hot tub is built of wood. Back in the old palaces and castles there were also such baths in use. However, those hot tubs were without the stove and the water was heated separately. Modern hot tubs are equipped with wood burning heaters to heat up the water into bath temperature. Wooden Hot Tub Guidance.
What is the pH of a hot tub?
The recommended pH for your hot tub is between 7.2 and 7.8. It is advisable to test your water with some test strips as you can add additives to increase or decrease the value. The pH range is from 0 (very acidic) 7 is neutral and up to 14 (very alkali.)
Where is the outlet for a hot tub?
If needed you can lead off the water with an outlet hose. The hot tub’s outlet is located under the hot tub near the heater and the outlet’s inner diameter is 50 mm. Take fire safety into consideration when placing the hot tub. Always ensure that the chimney is located away from flammable materials.
How often should I treat a thermowood hot tub?
We would recommend visiting the Kirami websitewhere you can find specific user manuals for each type of hot tub which will tell you how to look after your particular hot tub but in short, a thermowood tub should be treated with an UV-protected water-based wood oil like Teknoshield 4015at least once a year to maintain the beautiful brown colour. Red cedar tubs will go grey over time so it is best to treat the exterior with Textrol from Owatrolwhen necessary. ProfiLine composite and EcoPlank do not require any treatment.
How many people can fit in a woody tub?
It depends on which size tub you choose. The Cozy, Woody and Breezy tubs seat 4 to 6 people, whilst the Family seats 2 to 5. The Woody Tiny and Tiny seats only 2 people. It also depends how cosy or spacious you want to be.
Why do you leave the bottom plugs open in a hot tub?
The bottom plugs and exhaust valves need to be left open so that any water collected in the tub will discharge. Before lighting up the hot tub’s heater, always remember to check the water level inside the tub. The heater must not be lit when the tub is empty or the water level is below minimum fill limit.
How high should a tub be filled before a fire?
The tub needs to be filled at least 5 cm above the upper connection pipes of the stove before lighting the fire in the stove. The tub stove must never be lit when the tub is empty or not full. Heating a half empty tub will lead to melting the stove.
How long is a hot tub warranty?
A 2 year* warranty is provided as standard on all new hot tubs and we carry a wide range of parts and accessories in stock.
How Does a Wood Fired Hot Tub Work?
The back-to-basics design of a wood fired hot tub means that there is no electricity or electric hookups that heat the water. Instead, things get nice and steamy (104-105 degrees fahrenheit) thanks to a wood fired stove. There are two different kinds of stoves that power a wood fired hot tub: a submersible stove and an external stove.
How Long does a Wood Fired Hot Tub Take to Heat?
To bring your wood fired hot tub water temperature to 105° F expect a period of three to four hours, depending on the size of your hot tub and the heating method, as described above. A smaller ~350 gallon tub may take as little as 2.5 hours, whereas a larger tub two to three times the size will, surprise, take to to three times the time to heat.
What is the Best Type of Wood for a Wood Fired Hot Tub?
Cedar reigns supreme as the best type of fuel for a wood fired hot tub due to its high tannin content, which makes it naturally waterproof and prevents decay and wood rot. However, some brands successfully use wood like spruce to construct their tubs, but there are two kinds of cedar in particular coming in at the top of the list.
How to cool a wood burning tub?
It is pretty simple to cool a wood-fired tub: just reduce the size of the fire by using the chimney damper. This lets you limit how much oxygen can reach the flames. When you are done with the tub, you can either let the fire burn out on its own, block the stove's air intake, or douse the burning flames.
What is the best way to heat a hot tub?
Wood fired. If you want the most traditional heating method, then wood-fired is the way to go. With a wood-fired hot tub, you have a log-burning stove attached to the side of the tub. It can be either external or internal (separated from bathers by a wooden fence).
What wood is best for a wooden hot tub?
While most woods used in the construction of wooden hot tubs are both beautiful and functional, there are some that perform, or look, a little bit better than others.
How do wooden hot tubs work?
Wooden hot tubs are large barrel-shaped tubs, filled with water, and connected to a heating system. The main difference between wooden hot tubs of the past and the modern versions is that you now have more heating options available to you.
How much does a wooden hot tub cost?
Wooden hot tubs start from as little as $3,000 for a simple wood-fired model. They go all the way up to around $10,000 once you add gas or electric heating, or other options like lights or jets.
What type of wood is used for hot tubs?
The most popular type of wood for hot tubs is western red cedar. Look for tubs constructed from clear, all heart, vertical grain, with staves at least 1.75" thick. This will result in a more durable finish, reducing the chance that your wooden hot tub is going to succumb to warping.
How does a hot tub control the temperature?
You control the temperature of a wood-fired hot tub by the number of logs you add to the stove.
How long does it take to heat up a spa?
First of all, you need to plan when you want to start bathing and prepare your outdoor SPA accordingly. Usually, it takes 1-2 hours to heat up the water in summer, and 3-4 hours in the cold season.
How far down should the water level be in a tub?
The water level should reach 4-8 inches (10-20 cm) below the top ridge of the tub.
Can you put cold water in a wood fired hot tub?
In case the water gets too hot, open the lid of your wood fired hot tub, and you can even add some cold water to make the temperature comfortable for your body.
