Lighting your pilot
- Make sure your main gas supply is ON.
- From OFF position, turn gas control knob (reads OFF, ON & PILOT) counterclockwise to PILOT position.
- Push in knob (this releases the gas to the pilot area only).
- With control knob in, push the piezo ignitor in continuously until pilot ignites (every 3-5 seconds).
- Make sure your main gas supply is ON.
- From OFF position, turn gas control knob (reads OFF, ON & PILOT) counterclockwise to PILOT position.
- Push in knob (this releases the gas to the pilot area only).
- With control knob in, push the piezo ignitor in continuously until pilot ignites (every 3-5 seconds).
How to set the pilot on a propane fireplace?
The Centers for Disease Control offers this advice when heating your home:
- Use fireplaces, wood stoves or other combustion heaters only if they are properly vented to the outside and do not leak gas from the flue or exhaust into the indoor ...
- Do not burn paper in a fireplace
- Make sure you have proper ventilation if you must use a kerosene heater
Should I keep the pilot light burning on a gas fireplace?
Leaving the gas on keeps this compound moving out of the tubes. Keeping the pilot light on will also keep moisture out of the unit and in turn, help prevent corrosion. Plus, if the fireplace is located in the basement, it may also help to reduce humidity levels.
How to light your pilot in a Napoleon gas fireplace?
Gas fireplace with the pilot always on, has a hole with key in it on the floor right next to fireplace (based on prior answers thats for gas supply), a ‘light’ switch across the room that when flipped on basically turns the flames on and entire fireplace lights up, then a knob next to the light switch that when turned clockwise increase the ...
Why does my fireplace pilot light go out?
What Causes a Fireplace Pilot Light to Keep Blowing Out?
- Drafts. A draft might be the reason your pilot light keeps going out. ...
- Clogged Gas Line. The gas line feeding the pilot has a very small diameter, and it is easy for small particles to lodge there and prevent gas from flowing.
- Faulty Thermocouple. ...
- Faulty Gas Valve. ...
How do you light a pilot light on a ventless gas fireplace?
1:433:28How to Light a Vent Free Fireplace - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou come over to your igniter which is located on the left side on this model other models that mayMoreYou come over to your igniter which is located on the left side on this model other models that may be on the right side. And once it's feeding it gas you press on the igniter button.
Does a ventless fireplace have a pilot light?
Types of Ventless Fireplaces The latest models also feature automatic ignition, a function that eliminates the need for an outside electrical circuit to spark the pilot light -- a handy feature should the electricity ever go out.
Can you manually light a gas fireplace with electronic ignition?
Re-lighting pilot lights is straightforward on today's modern gas fireplaces. If you have an electronic ignition unit, using your remote control simply press the 'on' button and the pilot will re-ignite within a few seconds, followed by the fireplace a few seconds after that.
Why won't my gas fireplace light up?
If nothing is blocking the tubing, and gas is flowing out, there might be something wrong with the spark igniter and thermocouple. Make sure there's no debris lodged between the two. If the pilot light ignites but doesn't stay lit, you might need to replace the igniter.
Should the pilot light always be on gas fireplace?
We recommend that you turn off your gas fireplace pilot light seasonally. Turning off your gas fireplace's pilot light can save a substantial amount of energy and money. It is important to remember that not all gas fireplaces have “standing” pilot light, or, a pilot light that is “always on”.
Where is the pilot light on a gas fireplace?
Locate the gas control knob, which should have settings for "Pilot," "On," and "Off." Look around for a red or black button; this is the piezoelectric spark igniter. Press the button a few times to verify that there it creates a spark at the end of the pilot tube. This spark will ignite the pilot flame.
Do ventless gas fireplaces need electricity?
Electrical components within modern day gas furnaces are important for safe operation, though they also hinder use of your unit in the event of a power outage. However, ventless gas fireplaces can operate without the use of electricity during an outage by simply lighting their pilot light.
How do you start a gas fireplace with a key to the wall?
Lighting a Fireplace With a Key You'll either need a long lighter or match for this next step. Place it next to the burner, then pull the fuel trigger. To open the gas valve, turn the key. You may hear a slight hissing as the gas enters the burner, and the pilot light should light immediately.
How to reset a fireplace that doesn't have a reset button?
If your fireplace does not have a reset button, unplug the white molex connector from the module located at the bottom of the fireplace to the right of the valve, wait 60 seconds and plug it back in. As an alternative to unplugging the white molex connector you may turn off the power to the fireplace at the breaker box, wait 60 seconds, and turn the power back on.
How to reset a fireplace that has a black button?
If your fireplace has a black reset button, push the button . If your fireplace does not have a reset button, unplug the white molex connector from the module located at the bottom of the fireplace to the right of the valve, wait 60 seconds and plug it back in.
How long does it take for a pilot to light?
You should be able to see a spark at the pilot hood. If the pilot does not light within 45 seconds , turn the on/off switch back to the off position and wait 15 seconds. Repeat this step as necessary until the pilot ignites.
How long does it take for a fireplace to lock out?
NOTE: If the on switch is left on for more than 60 seconds and the pilot does not light the fireplace will go into "lock out" mode.
Video Guide: Starting A Gas Fireplace
The pleasure of having a gas fireplace is unmeasurable ( read more about them here ). There is no need to look for dry wood, carry it home, and chop it up before placing it in the fireplace.
How to operate an electronic pilot in a gas fireplace
Turn on the gas fireplace’s supply line. Ensure the electric switch is on if you have an electronic setting that controls the unit’s temperature. Look for the control knob labeled “pilot ignite.” If you have a unit that enables you to regulate the temperature, it will have: on, off, and electronic settings. Turn it off for a few minutes.
What you should know
If the pilot tube has air in it, it’s difficult to light. However, after numerous tries, the fireplace should ignite. If you notice that the pilot light needs to be lit frequently, check the end of the tube for debris.
Conclusion
The technique for relighting the pilot on your gas-burning fireplace is determined by the type of pilot you have; electronic or flame-lit. It isn’t difficult, but it may be perplexing if you’ve never done it before. The above are steps on how to start a gas fireplace and relight the pilot.
What happens if the pilot light goes out on a gas fireplace?
If the pilot light has gone out, the first thing to investigate is whether or not your gas supply has been exhausted. If you have your own tank, you can check to see if it is empty. You can also check with your gas provider to find out if you have had your supply interrupted by actions taken on their part. It is also possible for a pilot light to get blown out. If the fireplace’s gas valve has been closed, this will also cause the pilot light to go out. The most important point here is that it is important to determine the cause if the pilot light on your gas fireplace does go out. In many cases, you can always follow the manufacturer’s instructions and relight your pilot light accordingly.
What is the best thing about a gas fireplace?
The great thing about a gas fireplace is that it is easy to light and works quickly to heat up your home. The steps involved in lighting your pilot on your gas fireplace include:
Why do people use gas fireplaces?
Gas fireplaces are notable for producing heat that is energy efficient. These are just a few of the reasons that so many people are choosing the gas fireplace option for home heating. The safety offered by gas fireplaces is one of the leading benefits of this heating option. At the same time, it is important to understand important details related ...
Who owns Fireplace Concepts?
Brent Littleton is the owner of Fireplace Concepts in Lexington, Kentucky. Fireplace Concepts installs fireplaces for home builders in the area and offers both residential and commercial fireplace solutions.
What to do if pilot light valve is not apparent?
If your pilot light valve is not immediately apparent, reference your fireplace user manual to assure you are turning off the right valve.
Why do you need a pilot light on a propane heater?
When the fireplace or propane heater is turned on, the pilot light serves as an ignition source for the larger sweep of gas released from the burner. It also provides the energy necessary to open and close certain gas valves during startup.
What is a continuous pilot light?
Most gas fireplaces rely on a “continuous pilot light,” a type of pilot that remains lit so long as gas is flowing to the unit. Some newer, more energy-efficient models rely on an electronic ignition that only lights the pilot when the fireplace itself is turned on. Electronic ignition fireplaces rely on battery backup or electricity to operate.
What happens if the pilot goes out?
Even if the pilot goes out and gas continues to flow, almost all modern gas appliances have safety measures in place to stop the gas flow if a flame is not present. The most common safeguard is a temperature-sensitive valve near the pilot flame that will automatically close if it gets too cool.
How much gas does a pilot light use?
According to Anderson Fireplace, gas pilot lights use about 1,000 BTUs per hour. Based on the average cost of natural gas, this comes out to about $7 to $10 per month. This amount can easily add up if the unit is left running all year long–you could potentially be spending up to $120 per year on gas just to keep your pilot light going.
What to do if your fireplace is malfunctioning?
If your fireplace is malfunctioning or you just don’t plan on using it for a while, you may want to turn off the pilot light. Luckily, this is usually a fairly straightforward process.
Why is the pilot light running?
Keeping the pilot light running also prevents moisture build-up in the pipes. Since excess moisture increases the rate of corrosion, this can help your system last longer.
