How to Add Limit Mate to SOLIDWORKS
- Click Mate (Assembly toolbar) or Insert > Mate.
- Under Mate Selections, select the entities to mate for Entities to Mate .
- In the PropertyManager, under Advanced Mates:Click Distance or Angle .Specify Distance or Angle to define the starting distance or angle.Select Flip Dimension to move the entities to opposite sides of the dimension.Specify Maximum Value and Minimum Value to define the maximum and minimum extents of the limit mate.
- Click Distance or Angle .
- Specify Distance or Angle to define the starting distance or angle.
- Select Flip Dimension to move the entities to opposite sides of the dimension.
- Specify Maximum Value and Minimum Value to define the maximum and minimum extents of the limit mate.
How to limit angle mate in SolidWorks?
Tutorial - Limit Angle mate in SolidWorks? Here is the tutorial. Open the attached file. Click Mate. Under mechanical mates click Limit angle. Select both faces. Enter angles values. Click OK and the mate is generated. We can see that the part doesn't get crosses the angle limits.
How to limit the angle of a part in AutoCAD?
Click Mate. Under mechanical mates click Limit angle. Select both faces. Enter angles values. Click OK and the mate is generated. We can see that the part doesn't get crosses the angle limits.
How to make an angle in SolidWorks?
Select a line in the SolidWorkssketch for the first part of the angle. The line turns green. Click on a second line in the sketch. SolidWorks calculates the angle between the two lines. Move the cursor to fine-tune the position of the angle mark. The smart angle follows the pointer.
Why do we use angle limit dimension?
Without any mates to limit rotation, a part would be able to spin freely around the axis. By using an angle limit dimension, you are able to define two exact angle points around an axis to limit the motion of the part within.
What is angle limit dimension?
Angle limit dimensions control the rotation of a part around an axis. Without any mates to limit rotation, a part would be able to spin freely around the axis. By using an angle limit dimension, you are able to define two exact angle points around an axis to limit the motion of the part within.
What is a part mate in SolidWorks?
Part mates are a significant feature in SolidWorks that literally hold everything together. Most of the time a simple coincident or concentric mate is enough to get the job done. Other times you need mates that can give you more detail or more freedom.
Does SolidWorks have a mating menu?
SolidWorks offers an advanced mating selection menu that seems very intimidating at first, but if used correctly, can change your whole assembly. Let’s look into two of these advanced mates, angle limits, and distance limits, and see how to correctly use them to your advantage.