How to Sew a Basic Kick Pleat
- 1. Mark the hemline on the wrong side. Then, also on the wrong side, draw the seamline on the outermost extension. ...
- 2. Fuse a 2-1⁄2-inch-wide fusible interfacing strip around the hem’s wrong side. ...
- 3. Fold the hem along the hemline on both pieces. ...
- 4. Fold the kick pleat underlap hem allowance to the skirt’s right side. ...
Full Answer
How do you sew a kick pleat skirt?
Give each side of the kick pleat a really good press up from the corner to the top. Now we need to secure the kick pleat in place. With the skirt inside out, fold the left hand side of the kick pleat over on top of the right. To keep the layers in place as you sew, pin through both sides of the kick pleat, securing them together.
How do you line a skirt?
How to Line a Skirt. A skirt lining ensures that skirt fabric doesn’t ride up on the wearer’s legs. Most good tailoring includes a lining, but you can install one after the fact if you need to. The best way to make a skirt lining is to measure it from the pattern of the skirt and stitch it in before you hem the skirt; however,...
How do you do a kick pleat?
With a little pair of scissors, cut a snip on either side of the seam allowance, right at the corner. This will release the tension and allow the seam allowances to sit properly. Re-press the centre back seam allowance open, and press the seam allowance at the top of the kick pleat upwards. And that’s the kick pleat done!
What is a skirt lining?
A skirt lining ensures that the fabric doesn’t ride up on your legs, which makes the skirt more comfortable. You can create a skirt lining using any type of smooth, lightweight fabric. Create your lining with the same dimensions as your skirt and sew it in before you sew up the back seam and hem the skirt.
How to line a pre-made skirt?
How to sew a skirt with lining and back seams?
How to sew a zipper on a skirt?
How to make a waistband on a skirt?
How to sew a skirt with a straight stitch?
What is a skirt lining?
How to sew a skirt with a presser foot?
See 2 more
About this website
How do you hem a skirt with a kick pleat?
Sew it simplySew it simply. ... Mark the hemline on the wrong side. ... Fold the hem along the hemline on both pieces. ... Fold the kick pleat underlap hem allowance to the skirt's right side. ... Fold the 1⁄4-inch seam allowance above the underlap hem to the wrong side, and finish with a three-step zigzag stitch.More items...•
How can I make my pleated skirt more flattering?
Pleated skirts produce a slimming effect by highlighting the waist. And it is also common to pair it with a solid coloured top and heels. But don't forget to style it with sneakers for that casual look. Metallic silver pleated maxi skirt paired with a tucked-in black turtleneck gives you a beautiful lengthy look.
What is a kick pleat skirt?
Kick Pleats are inverted pleats used at the base of a narrow skirt to give it a 'kick'. They allow the wearer more freedom of movement. Kick pleats are often short pleats, leading up from the bottom hem, and are commonly found in the back of skirts or coats.
How do you put lining on a finished skirt?
7:2212:41How to add lining to an unlined skirt - Laurens Top Sewing Tips - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can either just hand sew. It. So you would pin it on as i've described. So far. And then youMoreYou can either just hand sew. It. So you would pin it on as i've described. So far. And then you would just use an invisible ladder stitch to sew. The that fold. And the center back of the lining.
How do I make my pleated skirt look less fat?
A way to create a longer, leaner look in a pleated skirt is to create a monochromatic column. This creates less division between your top and bottom half of your body and when the body is cut right across the mid-section it can make you look heavier.
Are pleated skirts in Style 2022?
The Pleated Skirt Is Big for Spring 2022 If this skirt looks familiar to you, there's a good reason for that: it's everywhere at the moment! Nearly every major celebrity, from Zendaya to Nicole Kidman, has worn this '00s-inspired bottom, inspiring bunch of knockoffs and similar designs.
How do you finish a kick pleat?
12:4216:59How To Sew A Kick Pleat - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnly don't cut into your stitches it's a little bit easier to see on the side cuz the stitches areMoreOnly don't cut into your stitches it's a little bit easier to see on the side cuz the stitches are darker. So you can see I just sliced open the seam allowance only.
How do you sew a kick pleat?
8:3615:22Sewing School: How to Sew a Kick-pleat - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe're gonna sew along this hem fold line of the overlap kick pleat with a stretch stitch. Now you'reMoreWe're gonna sew along this hem fold line of the overlap kick pleat with a stretch stitch. Now you're gonna trim the seam allowance of the kick pleat him and then we're gonna turn it right-side out.
How do you attach a vent to a skirt?
StepsNeaten the raw edges of your fabric with a serger or a zigzag stitch. ... Fold the hem twice along the hemline on both pieces. ... Stitch as close the inner folded edge as possible.Press the serged/zigzagged edges of the vent extension to the wrong side and over the stitched hemline and stitch in place.More items...•
How much shorter should the lining be for a skirt?
about one inch shorterThe lining hem may be stitched either by machine or by hand. The finished lining should be about one inch shorter than the skirt, or it may extend only to the upper edge of the skirt hem. If the skirt and lining are to be hemmed as one, mark the hem length on the outer fabric.
How do you sew a liner into a skirt?
2:185:21How to Sew a Lining in a Skirt with a Slit - Vent Extension - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo on my skirt I'll fold up the bottom the skirt lining one and a half inches to the wrong sideMoreSo on my skirt I'll fold up the bottom the skirt lining one and a half inches to the wrong side press. And then take the top raw edge turn under one quarter inch and press again. Please know when
Should you line a skirt?
A skirt lining ensures that the fabric doesn't ride up on your legs, which makes the skirt more comfortable. You can create a skirt lining using any type of smooth, lightweight fabric. Create your lining with the same dimensions as your skirt and sew it in before you sew up the back seam and hem the skirt.
Are pleated skirts flattering?
When styled correctly for your body type, pleated fabrics are incredibly flattering.
What tops to wear with pleated skirts?
WHAT TOPS GO WITH PLEATED SKIRTS?A blouse, top or button down for a more dressed up look or cute office outfit.A plain or graphic tee for a pulled together, but casual outfit.An oversized sweater or fun sweatshirt for a more sporty look.Pair a printed top with plain colored skirt or vice versa.More items...•
How do you style a pleated skirt?
How to Style a Pleated Skirt: 5 Daytime LooksCreate a monochromatic look. Match your skirt with your top for a chic monochrome outfit. ... Layer with a pullover sweater. ... Tuck in a T-shirt. ... Throw on a blazer. ... Wear with a button-down shirt.
Where should a pleated skirt sit?
The one rule when it comes to how to wear a pleated skirt though is you must wear them on the waist. This isn't a style to have sitting on your hips—the cut won't hang correctly, and that can add width.
How to sew a kick pleat on a skirt?
With the skirt inside out, fold the left hand side of the kick pleat over on top of the right. To keep the layers in place as you sew, pin through both sides of the kick pleat, securing them together. With your fabric marker, draw another line along the same line of stitching you sewed along the top of the pleat earlier.
How to sew a skirt with a chalk line?
Carefully take the skirt to your sewing machine, making sure to keep the kick pleat secured together with the pins. On the wrong side of the skirt, sew along the chalk line you have just drawn. If you can, it might help to remove the free arm from your machine to help avoid sewing through the front of the skirt.
How to keep layers in place when sewing?
To keep the layers in place as you sew, pin through both sides of the kick pleat, securing them together. With your fabric marker, draw another line along the same line of stitching you sewed along the top of the pleat earlier. Stop 1cm before you reach the edge of the overlocking stitches, as shown above.
How to finish a skirt hem?
With your skirt the right way out, finish your hem using a zigzag stitch or overlocker all the way around.
How to draw a vertical line down a pleat?
Starting with the left hand side, use a fabric marker to draw a vertical line down the folded hemline, at 4.5cm in from the edge of the pleat. As a guide, if you extend this line it should match up with the centre back seam. On the right hand side, do the same but this time at 1cm in from the edge. You will be able to use your seam allowance guide ...
Where should the kick pleat be secured?
The kick pleat should now be secured at the top, and look something like the above picture.
How to get seam allowance to sit properly?
With a little pair of scissors, cut a snip on either side of the seam allowance, right at the corner. This will release the tension and allow the seam allowances to sit properly.
What is a kick pleat?
A kick pleat is an opening in a seam backed by a fabric fold or extensions from the seam allowances that form a pleat backing. If it is without a pleat backing, it is called a vent. If your pattern doesn’t already include the necessary extensions, it is easy to add them. 1.
How wide is a kickpleat?
2. Vary the extensions’ size for your garment and style. Kickpleat extensions are typically 1-1⁄2 inches wide and long enough to reach from the hem to just above the knee.
How to make a hemline on a dress?
1. Mark the hemline on the wrong side. Then , also on the wrong side, draw the seamline on the outermost extension. On most garments, the left kick-pleat side overlaps the right. 2. Fuse a 2-1⁄2-inch-wide fusible interfacing strip around the hem’s wrong side.
How to line a pre-made skirt?
If you want to line a pre-made skirt, measure the circumference of the widest part of the skirt and the length of the skirt. Add 6 in (15 cm) to this length and buy that amount of fabric. Keep in mind that you will have to rip the seams on the skirt and re-sew it to add a lining properly, so this is not recommended.
How to sew a skirt with lining and back seams?
After you finish securing the lining and exterior piece together at the waistline, line up the exterior edges of the skirt and pin them together with the wrong sides facing each other. Then, sew a straight stitch 0.5 in (1.3 cm) from the raw edges of the exterior piece.
How to sew a zipper on a skirt?
If your skirt includes a zipper, then you will also need to sew the edges of your skirt’s lining to the edges of the zipper tape before you sew up the back seam. Fold the edges of the lining fabric under around the edges of the zipper. Then, insert a few pins on each side of the zipper to hold the fabric in place. Sew a zigzag or straight stitch along the edges of the zipper and skirt lining to secure them together.
How to make a waistband on a skirt?
Fold and sew the top edge of the skirt to create the waist band. After you have attached the exterior and lining layers of the skirt together , you can fold the top 0.5 in (1.3 cm) of the skirt’s exterior over to create a simple waistband. Then, sew a straight stitch about 0.25 in (0.64 cm) from the fold to secure it .
How to sew a skirt with a straight stitch?
Sew a straight stitch along the waistline of the pieces. Set your sewing machine to the straight stitch setting. Then, position the needle 0.5 in (1.3 cm) from the raw edges of the lining and skirt fabric. Sew a straight line along the edges to secure the exterior and lining pieces together.
What is a skirt lining?
A skirt lining ensures that the fabric doesn’t ride up on your legs, which makes the skirt more comfortable. You can create a skirt lining using any type of smooth, lightweight fabric. Create your lining with the same dimensions as your skirt and sew it in before you sew up the back seam and hem the skirt.
How to sew a skirt with a presser foot?
Sew a straight stitch along the folded edges of the skirt and lining. Place the pinned edge of the skirt’s exterior under your presser foot. Then, apply gentle pressure to the pedal to sew around the edges of the skirt’s hem . Remove the pins as you go to avoid damaging your sewing machine.
