Arrow T50 Staple Gun Instructions
- Locate the magazine at the bottom rare of the staple gun
- Press on the magazine, and it should spring out of its housing
- Take out the entire magazine
- Pick your choice of new staples (must be supported) and insert them into the guide rail. The pins should be facing upwards.
- Let it slide in completely
- Take the magazine and reinsert it. Make sure it sticks.
How to use an arrow T50 staple gun?
Like many of Arrow’s staple gun tools, the T50 has a rear-load magazine. First, remove the pusher by pushing down and in, and completely removing it from your tool. Staple Gun Loading Step 2. Next, take a fresh strip of Arrow T50 staples. Insert the staple strip onto the open guide rail.
How do you load a staple gun?
Here are some steps to load a staple gun based on its type. When using a staple gun that comes with the rear-loading of staples, we see a spring-loaded plunger that pushes the staples forward and releases them. The staple gun load consists of the following steps:
What is the Arrow PT50?
The Arrow PT50 delivers serious pneumatic tool performance at a price everyone will love. Packed with features like an easy-load magazine, overmolded comfort grip, adjustable exhaust cover, and contact safety – this tool has the power and versatility to tackle any home project. And, it’s capable of bump firing to speed big jobs along.
What is a PT50 staple gun used for?
Additionally, the staple gun has an overmolded comfort-grip to prevent the operator from uncomfortable grip fatigue. The PT50 Pneumatic Staple Gun is ideal for professional or general repairs, insulation installation, upholstery projects and more.
How do you fix an arrow pt50 staple gun?
0:241:35How To Clear A Jam From Arrow's PT50 Pneumatic Staple GunYouTubeStart of suggested clipEnd of suggested clipBut we recommend pliers pull or pry the jammed staple out insert a fresh strip of t50 staples intoMoreBut we recommend pliers pull or pry the jammed staple out insert a fresh strip of t50 staples into the magazine. Then close the magazine making sure it locks in place reconnect the air supply hose.
How do you load an arrow Professional staple gun?
0:072:10How to Load Arrow's T50AC Electric Staple Gun and Brad NailerYouTubeStart of suggested clipEnd of suggested clipTake a full strip of arrow T 50 staples with the legs facing up to the ceiling insert the staplesMoreTake a full strip of arrow T 50 staples with the legs facing up to the ceiling insert the staples into the tool and close the magazine. Make sure the magazine locks into place.
How do you load staples in an arrow cordless staple gun?
0:161:20How to Load Arrow's T50DCD Cordless Staple Gun - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake full strip of t 50 staples and insert them into the magazine. With the legs facing up to theMoreTake full strip of t 50 staples and insert them into the magazine. With the legs facing up to the ceiling insert the staples into the tool and close the magazine.
How do you load staples into a staple gun?
0:090:40How To Load A Bottom Load Staple Gun - YouTubeYouTubeStart of suggested clipEnd of suggested clipMy first piece of advice is turn the tool upside. Down before you load otherwise it loses tables. SoMoreMy first piece of advice is turn the tool upside. Down before you load otherwise it loses tables. So I need to load staples. Turn it to up open my latch pull magazine.
How do you load an arrow?
0:492:01How To Load an Arrow - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou want to do is you put it between your two finger tips just like that and then push the arrowMoreYou want to do is you put it between your two finger tips just like that and then push the arrow forward. And pull it back onto the string.
How do you open the Arrow t50 electric staple gun?
0:021:18How to Load Arrow's T50ACD Electric Staple Gun - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd or unplugged first you need to release the magazine by pushing down on the quick release andMoreAnd or unplugged first you need to release the magazine by pushing down on the quick release and opening the channel of the magazine. Now you can load your t-50 staples up to 1/2 inch.
How do you load an arrow brad gun?
0:131:00How to Load Arrow's ET200BN Brad Nailer - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst you need to make sure the power is turned off or disconnected in order to load this tool pressMoreFirst you need to make sure the power is turned off or disconnected in order to load this tool press the magazine lever while pulling the magazine. Open now you can insert the nails into the magazine.
How do you open an arrow electric stapler?
0:040:44How to load Arrow T50ACD Electric Staple Gun - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo pull open the magazine. Take your C 50 staples load them inside of the channel. Close theMoreTo pull open the magazine. Take your C 50 staples load them inside of the channel. Close the magazine and so you hear it. Click. Then you're ready to use your staple gun.
How do you use an electric staple gun?
0:040:55How to Use an Electric Stapler - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow if you want to drive the staplers a little bit further what you can do is place the palm of yourMoreNow if you want to drive the staplers a little bit further what you can do is place the palm of your hand on top of the top of the stapler. And when you squeeze the trigger.
How do you load a 3 in 1 staple gun?
1:032:18How To Load An Amtech 3-in-1 Staple Gun - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou put the you staples directly down the middle.MoreYou put the you staples directly down the middle.
What is the screw on top of a staple gun for?
Some staple guns, particularly high-end manual units, have a screw on the upper outer casing above the hammer head. This allows you to adjust the penetration depth of the staple into your target material.
How do you load staples in Arrow hammer tacker?
0:011:08How to Load Arrow's HT50 Professional Hammer TackerYouTubeStart of suggested clipEnd of suggested clipAnd sizes from 5/16 up to half-inch leg lengths insert the staples onto the guide rail sliding. ThemMoreAnd sizes from 5/16 up to half-inch leg lengths insert the staples onto the guide rail sliding. Them all the way to the front of the tool reinsert.
How do you load and unload a staple gun?
0:147:29How To Load Unload And Store Arrow T50 Staple Gun Safety ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo this is very simple if you'll come up close here. The arrow t-50 loads from the back. I'm firstMoreSo this is very simple if you'll come up close here. The arrow t-50 loads from the back. I'm first we've got to take this bracket this back part off and we just push this.
How do you load an arrow brad gun?
0:131:00How to Load Arrow's ET200BN Brad Nailer - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst you need to make sure the power is turned off or disconnected in order to load this tool pressMoreFirst you need to make sure the power is turned off or disconnected in order to load this tool press the magazine lever while pulling the magazine. Open now you can insert the nails into the magazine.
What size staples does an Arrow T50 staple gun take?
Keep your staple gun ready for use with these Arrow T50-type 1/2-inch staples.
Staple Gun Loading Step 1
Like many of Arrow’s staple gun tools, the T50 has a rear-load magazine. First, remove the pusher by pushing down and in, and completely removing it from your tool.
Staple Gun Loading Step 2
Next, take a fresh strip of Arrow T50 staples. Insert the staple strip onto the open guide rail. Then, tilt the staple gun downward, letting the staples slide effortlessly to the front of the tool.
Staple Gun Loading Step 3
Finally, reinsert the pusher onto the guide rail, pushing it all the way forward until it locks into place. You’ll hear and feel it lock. That’s how to load a staple gun. You’re now ready to fire your staple gun.
What is the Arrow PT50?
The Arrow PT50 delivers serious pneumatic tool performance at a price everyone will love. Packed with features like an easy-load magazine, overmolded comfort grip, adjustable exhaust cover, and contact safety – this tool has the power and versatility to tackle any home project. And, it’s capable of bump firing to speed big jobs along. PT50 comes with all necessary fittings and operates on home compressors up to 120psi.
Is a staple gun easier to use than a stapler?
The staple gun has a nice ergonomic design making it easy to use. Much easier than using a manual stapler and more consistent driving staples compared to electric. The only point of possible improvement would be depth setting. Didn't see a label on which way to turn to increase or decrease and a little hard to turn.
How to load staples on arrow staple gun?
To load an Arrow staple gun, first, bring out the pressure rod on the back of your stapler. Then insert the staples and reinsert the pusher rod. Though the procedure is somewhat the same for most of the Arrow staple guns, it might vary a little according to each model. And don’t forget to turn the power off before you start loading the gun.
Where is the pusher rod on a T50 staple gun?
In your T50 staple gun, the pusher rod is located at the bottom. You can just press down the back of your staple gun. And this way the pusher rod will be unlocked. Now slide the pusher out and keep it aside.
What is a TT21 staple gun?
TruTac staple gun also knows as TT21 by Arrow Fastener is a manual staple gun that is suitable for your lightweight home projects. Arrow Fastener has released another heavy-duty staple gun known as the TruTac Heavy Duty Staple Gun (TT50) that has lots of similarities with the TT21 staple gun.
Why does my staple gun get worn out?
If your staple gun has got a spring that generates tension for you to do the stapling, it might get worn out if you keep the staples on the tool even after you are done. So if you keep doing this for a long period, the spring might not generate the same pressure as it did when you first bought it.
How to lock the back of a stapler?
Once the staples are in, reinsert the pusher rod and lock the back of it by pressing it a little bit downward.
How to keep staples in place when holding tool upside down?
As you have held the tool upside down, keep the staple row in a way that the legs are facing upward while inserting the staples.
How to load TruTac staple gun?
As TruTac staple gun has got a bottom load magazine, hold the tool upside down to load the staple. Now lift the black clip on the back of the staple gun up and this should let you release the magazine.
Product Overview
The Arrow PT50 Pneumatic Staple Gun is one of Arrow's most popular staple guns. Unlike other pneumatic staple gun options, the PT50 Pneumatic Staple Gun has the capability to bump fire, making any professional or DIY home project a breeze.
Info & Guides
You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
