To load a bump feeder head, first, make sure that the power to the trimmer is turned off. Then, remove the spool cap from the trimmer head and pull out any remaining line from the spool. Next, wrap your new line around the spool in a clockwise direction until it is snug against the shaft.
What is an easy load bump feed head on a trimmer?
Our new line of grass trimmers now come with an easy load bump feed head. This makes the nylon line much easier to load over the older grass trimmers where you had to take the head apart. Below is a simple guide on how to instal trimmer line onto the new grass trimmer heads.
How do I replace the line on my electric trimmer head?
Take apart the trimmer head by unscrewing the bump knob and removing the inner reel and spring from inside. Pull out the old line and throw it away. Clean out any debris that's collected inside the trimmer head. If the trimmer head's assembly screw is loose, set it aside where you won't lose it until the time comes to reassemble it. 3.
How do you fix a clogged trimmer head?
Take apart the trimmer head by unscrewing the bump knob and removing the inner reel and spring from inside. Pull out the old line and throw it away. Clean out any debris that's collected inside the trimmer head. If the trimmer head's assembly screw is loose, set it aside where you won't lose it until the time comes to reassemble it.
How do I load a bump feeder?
Bumping Fresh LineSelect Your Line.Disassemble the String Trimmer Head.Insert the Line.Wrap the Line Onto the Reel.Reinsert the Spring and Feed the Line.Close the Head Tight.Pull Out the Line.
How do you fill a bump head?
0:291:39How to install new trimmer line on a traditional bump head - YouTubeYouTubeStart of suggested clipEnd of suggested clipFind the two holes on top of the inner reel and insert both ends of the line into one of the holes.MoreFind the two holes on top of the inner reel and insert both ends of the line into one of the holes. Pull. The line through until two to three inches. Remain.
How do you use a bump feeder head?
0:102:5449290 / BC35TS-2 - Using the bump knob on the line trimmer - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd we just bump this on the ground like so then the line will move out around about 10 millimetersMoreAnd we just bump this on the ground like so then the line will move out around about 10 millimeters each time we bump it but the head of the machine must be rotating firmly.
How do you load a speed feed head?
0:081:24How to Easily Load Speed Feed® Trimmer Line - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe line loads by simply turning the large knob on top of the trimmer head it's that simple.MoreThe line loads by simply turning the large knob on top of the trimmer head it's that simple.
How do you load strimmer wire?
7:229:13How to Load Trimmer Line into a Strimmer - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd press the strimmer against the ground causing. The button to push in and if you cause the bottomMoreAnd press the strimmer against the ground causing. The button to push in and if you cause the bottom to push in this trimmer angular speed out so if I just pull I can show additional rain.
How do I change the string on my head trimmer?
0:163:58How to Replace a String Trimmer Head - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut once you put down in the hole you have to turn the head. Until it locks in place okay. RightMoreBut once you put down in the hole you have to turn the head. Until it locks in place okay. Right there it just locked. So now the other thing is most time they're threaded opposite.
How do you use a Stihl bump head?
0:381:58How to re-fill a grass trimmer bump-feed AutoCut 25-2 headYouTubeStart of suggested clipEnd of suggested clipYou look inside the head in the spool. There you'll see a couple of small holes in there which youMoreYou look inside the head in the spool. There you'll see a couple of small holes in there which you push the line into this time. And put the other one in the other side there.
How does auto feed spool work?
Information. The Automatic Feed Spool (AFS) is the technologically advanced line feed system found on Black & Decker string trimmer products. Using centrifugal force, the system monitors the amount of line being used and feeds more line automatically as the cutting line shortens.
How do you load a fixed line trimmer head?
0:062:19How To Install the REEL EASY+ 2-in-1 Fixed Line & Bladed ...YouTubeStart of suggested clipEnd of suggested clipTake apart the housing by pushing together and rotating the upper housing counterclockwise till theMoreTake apart the housing by pushing together and rotating the upper housing counterclockwise till the arrows align and pull apart remove the spring then insert the nut into the base of the housing.
How do you put a universal trimmer head on?
2:045:05Universal Trimmer Head Installation and Line Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou're going to match up the notches on the side flaps of the top side of the trimmer head to theMoreYou're going to match up the notches on the side flaps of the top side of the trimmer head to the bottom side of the trimmer head you'll see that they are different lengths.
How do you know if a bump on the head is serious?
With more severe injuries, you might notice:Vision loss.Slurred speech or nonsensical words.An inability to understand speech.Have the worst headache of your life, a headache that is worsening, or a headache with two or more episodes of vomiting.
Is it good to have a bump after hitting head?
Keep in mind that even a minor head bump can cause a large swelling. And the speed, momentum and size of the people (full-grown adolescents versus young children) and the forces involved (such as impact with a concrete floor or other hard surface) may increase the possibility of serious injury.
Should you put ice on a bump on the head?
Apply ice to the bruised area to minimize the swelling. A bump (goose egg) often develops. The size of the bump does not suggest the severity of the injury. A small bump may be serious, and a large bump may mean only a minor injury.
How long does it take for a goose egg on your head to go away?
To reduce swelling, apply an ice or cold pack wrapped in a towel to the area for 15-20 minutes, remove it for 30 minutes and reapply. Try this for a day or two, several times a day. Swelling will usually begin to go down within a few hours, but it may take up to a week for the goose egg to go away.
How to get weeds out of a weed trap?
Once the line is in its proper place, you're all set. Start it up and give it a few spins to make sure it's set in place well, then go trim some pesky weeds.
How to replace a string on a trimmer?
1. Select Your Line. Select your line based on what your trimmer's user manual suggests. You don't want to overload your trimmer with a line that's too thick or it'll bog down the motor.
Where is the arrow on a fishing reel?
Wrap the line on in the direction of the arrow on the reel. You'll see a small arrow embossed or embedded on the trimmer head. The location of the arrow differs on each trimmer head but should be somewhere near the outside edge of the reel. Be sure you add enough pressure to keep it evenly wrapped.
