How to Load Staples Into the Stanley Sharpshooter Stapler
- Ensure the handle safety is on and the handle is locked down.Turn the stapler so the bottom is facing up.
- Release the loading latch at the end the stapler and pull the slide open.
- Lay a stick of staples in the loading channel with the legs of the staples facing up.
- Push the slide in until the loading latch clicks and catches.
How do you load a craftsman stapler?
How do you use a craftsman staple gun? How to Load Staples Into a Sears Craftsman Stapler Model 6843. Turn the stapler upside down so the handle trigger faces downward. Press the metal latches on the rear edge of the stapler to release the cover. Slide the metal cover backward to expose the chamber for holding staples.
How to load a Swingline heavy duty stapler?
Method 1 Method 1 of 4: Opening a Top Loading Stapler Download Article
- Hold the stapler's base in place. Hold the stapler against a flat surface, such as a table. ...
- Pull the plastic top up to expose the stapler tray. On a top load stapler, you'll see the metal staple tray set inside the plastic.
- Place new staples legs-down in the tray. ...
- Lower the stapler head to close it. ...
How to load a top load staple gun?
- Unlike manual staple guns that are rear loading, electric guns are bottom loading. ...
- In some cases, your staple gun might not have a trigger. ...
- Find the magazine release buttons at the back of the staple gun. ...
- In some cases, you might be confused about tackling the magazine that holds the staples. ...
How to load staples into Stanley tr45 staple gun?
How to Load Staples Into the Stanley Sharpshooter Stapler Ensure the handle safety is on and the handle is locked down. Release the loading latch at the end the stapler and pull the slide open. Lay a stick of staples in the loading channel with the legs of the staples facing up.
What is a Stanley staple gun?
How to open a staple gun?
How many sheets can a staple gun hold?
How to prevent staples from misfiring?
Can you use a Stanley staple gun for upholstery?
How do you fill a Stanley heavy duty staple gun?
0:181:27How To Reload A Stanley Staple Gun - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd I am placing them inwards in this section right here and they fit just snug. In there once youMoreAnd I am placing them inwards in this section right here and they fit just snug. In there once you have placed the staples in this section right there you can actually slide this shut.
How do you load staples into a heavy duty staple gun?
0:170:58How to load the JT21CM All Purpose Staple Gun - YouTubeYouTubeStart of suggested clipEnd of suggested clipPut both fingers in the bot on the bottom of this of the pusher run push it in and down to releaseMorePut both fingers in the bot on the bottom of this of the pusher run push it in and down to release the pusher rod take the rod. Out. Use your JT 21 staples fold them on to the rail.
How do you load staples in a Stanley Bostitch heavy duty staple gun?
0:413:55Stanley bostitch 2 in 1 staple gun - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd I'm going to put it inside the device laying it flat on this side. So there we go just put itMoreAnd I'm going to put it inside the device laying it flat on this side. So there we go just put it inside like that put it all the way to the back and then I'm going to slide this back up.
How do you load a Stanley Heavy Duty sharpshooter stapler?
Be sure you have the recommended staples or they may not fit.Step 1: Open the Staple Drawer. On the back side of the stapler, there's a black heel, which is the latching cover of the staple drawer. ... Step 2: Load the Drawer. ... Step 3: Close the Drawer.
How does a heavy duty stapler work?
Loading Instructions: Heavy Duty StaplerPlace stapler on a flat surface. ... Pull the stapler slide mechanism out of the back of the stapler so there is room to insert the staples.Insert the staples onto the stapler slide. ... Reinsert the slide mechanism back into the stapler slide.
How do you load staples in a Stanley staple gun tr110?
0:000:17Load a Stanley Stapler (TR-110) : How to Vids Under 20 SecondsYouTubeStart of suggested clipEnd of suggested clipHow to load a Stanley TR 110 stapler be sure your lever latches is locked down pull out the loadingMoreHow to load a Stanley TR 110 stapler be sure your lever latches is locked down pull out the loading mechanism take your staples upside down place them into the stapler. Close the mechanism.
How do you load a Stanley?
0:061:13Stanley Heavy-Duty Staple Gun | Screwfix - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's got a great little feature here as well there's a locking catch on the handle. So to engage theMoreIt's got a great little feature here as well there's a locking catch on the handle. So to engage the staple ready to go simply depress the lever under the catch.
How do you load staples in Stanley Bostitch b8hdp?
Grasp the arm and close it down over the carrying tray. As you move the arm downward, you will feel the tension of the hinge return. Push down forcefully on the the arm to make a test staple. The stapler is now loaded and should be ready for use.
How do I load staples in my Stanley tra700?
0:000:47How to Load a Stanley Staple Gun - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo in particular this is a stanley staple gun what you're going to do is go to the bottom and it hasMoreSo in particular this is a stanley staple gun what you're going to do is go to the bottom and it has an arrow. Right here pointing this way so what you're going to do is push this out and pull it up.
How do you load a Stanley staple gun with brads?
1:3210:39Stanley TRE550 Staple Gun/Brad Nailer. Review and Demonstration.YouTubeStart of suggested clipEnd of suggested clipThis is the staple loading mechanism in order to operate this you've got to push it forward as inMoreThis is the staple loading mechanism in order to operate this you've got to push it forward as in that way. And then flick it upwards like.
How do you load a t50 staple gun?
0:031:04How to Load Arrow's T50 Staple Gun - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst you need to remove the pusher by pushing in and completely removing it from the tool. Then youMoreFirst you need to remove the pusher by pushing in and completely removing it from the tool. Then you take a fresh strip of arrow t-50 staples and insert them on to the guide rail.
How do you change staples in a staple gun?
0:190:42How to put staples in my Amtech Staple Gun - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe answer is quite easy at the back of the tool is a little spring-loaded. Bracket you push it inMoreThe answer is quite easy at the back of the tool is a little spring-loaded. Bracket you push it in and down and out comes the staple shoot. You then insert your staple. Into the end insert.
How do you open the bottom of a staple gun?
Look for the release lever on the very bottom of the staple gun. Pull on the lever to unclip the magazine, then pull the magazine out of the gun. Remove any jammed staples in the magazine with needle-nose pliers. Some jams are caused by staples failing to properly leave the magazine.
How do you load staples?
Insert the strip of staples, points down, into the staple channel and close the top of the stapler, the magazine will slide back into its correct position and you'll hear a small click. Some of our staplers, such as the Zero 01 or our range of Heavy Duty staplers, are front loading.
How do you change staples in a stapler?
2:003:31How To Refill A Stapler-Tutorial For Putting More Staples In - YouTubeYouTubeStart of suggested clipEnd of suggested clipRight the prongs. Go down the flat side is the side that you see so as you can see right here thisMoreRight the prongs. Go down the flat side is the side that you see so as you can see right here this is all the flat. Side okay as you can see right there's all the flat side that faces.
What is a Stanley staple gun?
The Stanley Staple gun is a heavy-duty staple gun that you can use for decorating, upholstery, construction, or crafts. The tool uses Stanley heavy-duty staples from ¼ inch to 9/16 inch long. It has a loading window on the front of the gun that allows you to see when you are almost out of staples. Also, it has a locking handle that prevents staples from misfiring.
How to open a staple gun?
Release the loading latch at the end of the staple gun and pull the side open. Pulling the lever out exposes the magazine
How many sheets can a staple gun hold?
It is also designed to cover your high-volume stapling needs. A heavy-duty staple gun can hold up to 160 sheets.
How to prevent staples from misfiring?
Make sure that the handle safety is on and that you have locked down the handle. This will prevent misfiring if at all there are any staples left in the magazine
Can you use a Stanley staple gun for upholstery?
You can use the Stanley staple gun for quick, simple, and effective upholstery, light construction, and trimmings. Loading your Stanley staple gun is easy to load. The loading process is not complex. All you need to do is understand the type of your staple gun and you are good to go.
How does Stanley Staple Gun Work?
This till works by the action of a human being. By pulling the trigger using your hand, the nail or the staple is released at a high speed. The nail is ejected with a lot of force too. When shooting, ensure that the target is at a close range. It might not work so well when the target is quite far.
How to load Stanley staple gun?
There are different kinds of Stanley Staple Guns. In most cases, there are two ways to load depending on the model which you have. The methods which you can use to load are:
What is the procedure of loading using this method?
Switch off the power source from the main source. Then unplug the cable of the gun from the socket. Do not attempt to load when it is connected to the power source. This is because it may cause electric shocks or even physical harm.
What to do if you leave papers without attaching them?
Leaving the papers without attaching them is akin to losing your data. To avoid the mess, you got to staple them together. On the other hand, you may need to drive a small nail into a piece of wood or plastic. The tool to use for the same is a staple gun. When the gun has run out of staples or nails, you will be required to load more.
Why does my gun not work?
Other factors could be things like damages to the gun. The spring might also malfunction rendering the unit non-functional. If it fails to function due to a lack of pins, then you will need to load more. But if it fails due to other factors, then you will have to carry out repairs.
How to test a staple gun?
Test the gun. Press the trigger to confirm if it can now shoot. It should be able to shoot the staple. Test it using the exact material which you will use for the project. Should it fail the test, and then change the staples before the actual exercise begins.
What to do when a gun runs out of staples?
There are two or more methods of doing the replacement. When doing this, always exercise a lot of care to avoid injuries. Whenever possible, lock the trigger to avoid accidental damages. You better be safe than sorry.
To install brads in a Stanley staple gun is not a difficult task. Here are the steps that you need to follow
Unplug the code of the Stanley staple gun from the electrical socket to prevent accidents. The staple gun can accidentally discharge brads, which can cause injuries to the user.
Instructions to be followed
It is important to follow the instructions below to prevent cases of electric shock, misfiring, and causing serious injury to the user:
What is a Stanley Sharpshooter staple gun?
The Stanley Sharpshooter Staple Gun is a heavy-duty staple gun you can use for upholstery, decorating, crafts or construction. The gun uses Stanley heavy duty staples from 1/4 inch to 9/16 inch long.
How long should staples be?
Stanley recommends choosing staples long enough that approximately 3/16 inches of the staple penetrates the items being stapled.
Who is Cynthia Myers?
Cynthia Myers. Cynthia Myers is the author of numerous novels and her nonfiction work has appeared in publications ranging from "Historic Traveler" to "Texas Highways" to "Medical Practice Management.". She has a degree in economics from Sam Houston State University.
What is a bostitch stapler?
Bostitch staplers are designed to allow you to attach paper, wood, cloth and other materials with minimal pressure. Heavy-duty models are created for office work, such as stapling reports and construction projects. The latter usually employs a pneumatic air pressure to attach the staples.
How to remove stapler from magazine?
Hold the top of the stapler in place with your non-dominant hand. Never place your hand under the stapler. Use your dominant hand to push in on the back and then pull it up and out. Detach it completely, and the magazine where the staples are placed should be removed as well.
How many times has wikihow been viewed?
To create this article, volunteer authors worked to edit and improve it over time. This article has been viewed 24,639 times. Thanks to all authors for creating a page that has been read 24,639 times .
What is wikihow wiki?
X. wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, volunteer authors worked to edit and improve it over time. This article has been viewed 24,639 times.
What is a Stanley staple gun?
The Stanley Staple gun is a heavy-duty staple gun that you can use for decorating, upholstery, construction, or crafts. The tool uses Stanley heavy-duty staples from ¼ inch to 9/16 inch long. It has a loading window on the front of the gun that allows you to see when you are almost out of staples. Also, it has a locking handle that prevents staples from misfiring.
How to open a staple gun?
Release the loading latch at the end of the staple gun and pull the side open. Pulling the lever out exposes the magazine
How many sheets can a staple gun hold?
It is also designed to cover your high-volume stapling needs. A heavy-duty staple gun can hold up to 160 sheets.
How to prevent staples from misfiring?
Make sure that the handle safety is on and that you have locked down the handle. This will prevent misfiring if at all there are any staples left in the magazine
Can you use a Stanley staple gun for upholstery?
You can use the Stanley staple gun for quick, simple, and effective upholstery, light construction, and trimmings. Loading your Stanley staple gun is easy to load. The loading process is not complex. All you need to do is understand the type of your staple gun and you are good to go.
