- Step 1: Pull the plunger all the way out until it locks into place on the bottom cap.
- Step 2: Insert the filling nipple on the cap of your gun into the filling fitting on the bulk pump. Most grease guns these days have these nipples already. You can also buy one separately.
- Step 3: Pump the barrel to begin filling your reservoir. ...
Full Answer
How do you load a grease gun with a cartridge?
Loading a Cartridge Grease Gun Unscrew the cartridge cap. Pull back on the metal handle. Secure the piston rod and remove the cartridge. Prepare the new grease cartridge for loading. Insert the cartridge into the barrel. Reattach the barrel to the head of the grease gun.
How do you apply grease lubricant?
Grease lubricant is applied with a grease gun, available at most hardware and auto parts stores. Loading one can be a bit messy, but uncomplicated, whether you've got a cartridge loader or a reservoir-style grease gun. Separate the grease gun head from the barrel.
How do you stop a grease gun from locking up?
Prevent air locks by filling the grease gun head before adding the new cartridge (Photo 1). Insert the new cartridge and screw on the barrel until it seats against the head. Then back it off two turns and release the spring tension.
How do you change a grease cartridge on a Bosch grease gun?
Open the new grease cartridge. Insert the new grease cartridge into the barrel of the gun. Note the pull-tag on the end of the new cartridge. Ensure that cartridge is pushed in enough so that the rim is in contact with the rim of the grease gun. Reinstall the barrel to the end cap but keep it loose.
How do you properly load a grease gun?
0:102:15How to Properly Load a Grease Gun - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd sometimes you'll have grease on to the cap. And you want to make sure you get that into theMoreAnd sometimes you'll have grease on to the cap. And you want to make sure you get that into the barrel. Next you want to screw the barrel back onto the head of the grease gun.
Which end of grease tube goes in first?
0:525:29How to Load a Grease Gun - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the first thing you need to do is you remove the protective. Cap. This end will go into the gun.MoreSo the first thing you need to do is you remove the protective. Cap. This end will go into the gun.
How do you put a new tube of grease in a grease gun?
Load new grease cartridge Unscrew the body of the grease gun. Remove the plastic cap from the new grease cartridge. You'll notice the grease doesn't come all the way to the top of the cartridge, which is by design. Insert this end into the body of the gun first.
How do you load and unload a grease gun?
To load a grease gun from large containers instead of cartridges, unscrew the grease gun head from the barrel. Then, stick the open end of the barrel into the container of grease and slowly pull back on the plunger rod to fill the reservoir with grease.
How do you know when a grease fitting is full?
If this is the case, the best tactic is to “feel” the grease into the bearing cavity until slight resistance or back pressure is felt against the trigger, or lever, signaling the bearing cavity is now full.
Can you leave grease in a grease gun?
It is acceptable to leave unused grease in a grease gun. It is recommended to release the pressure from the grease by drawing the handle back and locking the spring in the retracted/compressed position.
How do you load a grease gun without a cartridge?
0:485:03Handheld Grease gun filling methods - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd completely submerge the open end of the tube assembly into the open container of grease. SlowlyMoreAnd completely submerge the open end of the tube assembly into the open container of grease. Slowly pull back on the t-handle. And draw a grease into the tube.
How do you change a cartridge on a grease gun?
0:102:08Change a grease gun cartridge ( easy ) - YouTubeYouTubeStart of suggested clipEnd of suggested clipKeep it open late while you change the can so take the top all the way off. And then grab paperMoreKeep it open late while you change the can so take the top all the way off. And then grab paper towel or something. And pull the old can out.
How do you change a grease tube?
2:3211:02Changing a Grease Tube - YouTubeYouTubeStart of suggested clipEnd of suggested clipThat slide out a little bit easier so there we have the old tube. Now we're just going to look in IMoreThat slide out a little bit easier so there we have the old tube. Now we're just going to look in I like to look in and make sure there's not a lot of grease left in the bottom. Looks like this one's
How do you use a manual grease gun?
Insert the barrel down about 2 inches (5.1 cm) into the grease. Push down on the barrel while pulling up on the plunger or rod handle. Lock the rod handle when it is fully extended. Move the gun barrel from side to side to cut off the extra grease after the barrel is full.
How do you know when a grease gun is empty?
0:151:05How to Check the Level in a Grease Gun - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply pull the plunger out until it stops. The amount of grease on the raw which is exposed willMoreSimply pull the plunger out until it stops. The amount of grease on the raw which is exposed will show you how much grease is left in the cartridge. So taking the same distance.
How do you install a grease cartridge?
1:334:36How to Load a Grease Gun Cartridge Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd take off take off this cap right here. And you know when I was younger there were a few timesMoreAnd take off take off this cap right here. And you know when I was younger there were a few times that I tried to put the metal end in first and it's not going to fit. So if you're if you're trying to
What happens if you over grease a bearing?
Too much grease volume (overgreasing) in a bearing cavity will cause the rotating bearing elements to begin churning the grease, pushing it out of the way, resulting in energy loss and rising temperatures.
How often should you grease pillow block bearings?
To prevent corrosion, all bearings should receive grease and be rotated the first of every month. Turn the wheel by hand while greasing bearings. A clean 1/16" bead of grease must appear on each side of each bearing.
How much grease do I put in a bearing?
Open angular contact thrust ball bearings for screw drives should be lubricated with a grease quantity that fills ~ 25 to 35% of the free space in the bearing. Freshly greased bearings should be operated at low speeds during the running-in period.
What type of grease is best for wheel bearings?
Most wheel bearings require an NLGI 2 grade grease, while some sealed hub units require an NLGI 00 grade semi-fluid product.
How to clean grease gun?from wikihow.com
Test the dispensing of the grease. Press on the handle of the piston rod and squeeze the trigger of the grease gun until delivery of grease is seen at the end of the grease gun applicator tube . Wipe excess grease from the dispensing tip and the body of the grease gun. Use a cloth or rag to wipe the gun down and clean it to prepare for use.
How to move piston rod in grease gun?from wikihow.com
Secure the piston rod and remove the cartridge. On most grease guns, you should be able to move the piston rod sideways slightly, into a slot in the barrel so that it cannot move forward. On some grease guns, the retracted piston rod will latch into the fully retracted position, and a release tab is provided on the end of the barrel to allow the piston rod to move again.
How to clean grease off of plunger rod?from wikihow.com
When the plunger rod has been fully withdrawn, lift the open end of the barrel out of the container of grease. Rotate the barrel to break it free from grease that may cling to the barrel. Use a cloth or rag to wipe excess grease from the end of the barrel. ...
How to fill a barrel with grease?from wikihow.com
Insert the open end of the barrel into a container of grease. Fill the barrel by holding the open end of the barrel down into the container of grease and slowly drawing back on the plunger rod to fill the reservoir, pulling grease back into the barrel.
What is grease gun?from wikihow.com
Grease is like caulk; really sticky, gooey, not-easy-to-clean caulk with packaging that can lay you open.
What happens when you remove the metal seal from a grease cartridge?from wikihow.com
After removing the metal seal from the end of the replacement grease cartridge, the end of the cartridge and the removed metal seal will have exposed sharp edges.
How to get grease out of a tool?from thisoldhouse.com
You may actually have to push it down through the grease. Tighten the tool and dispense grease onto a piece of cardboard until it flows burp-free. If the handle doesn’t resist the pressure you put on it, there is air in the tool. Keep pumping until the flow is uninterrupted.
How to clean grease gun?from wikihow.com
Test the dispensing of the grease. Press on the handle of the piston rod and squeeze the trigger of the grease gun until delivery of grease is seen at the end of the grease gun applicator tube . Wipe excess grease from the dispensing tip and the body of the grease gun. Use a cloth or rag to wipe the gun down and clean it to prepare for use.
How to move piston rod in grease gun?from wikihow.com
Secure the piston rod and remove the cartridge. On most grease guns, you should be able to move the piston rod sideways slightly, into a slot in the barrel so that it cannot move forward. On some grease guns, the retracted piston rod will latch into the fully retracted position, and a release tab is provided on the end of the barrel to allow the piston rod to move again.
How to remove a cartridge from a greasing gun?from garageever.com
After unscrewing the cap, remove the empty cartridge by pushing the pleasure forward on your greasing gun. You can also use your hand to bring out the old tube. When you remove the cartridge by pushing the plunger, you must pull the plunger back and lock it.
What is grease gun?from wikihow.com
Grease is like caulk; really sticky, gooey, not-easy-to-clean caulk with packaging that can lay you open.
How much pressure does a grease gun push?from thisoldhouse.com
But in all cases, we’re talking about some pressure. Cordless grease guns are pushing at up to 10,000-psi. Out of the box, the grease gun may have a flexible hose or a fixed metal tube.
What happens when you remove the metal seal from a grease cartridge?from wikihow.com
After removing the metal seal from the end of the replacement grease cartridge, the end of the cartridge and the removed metal seal will have exposed sharp edges.
How to get grease out of a tool?from thisoldhouse.com
You may actually have to push it down through the grease. Tighten the tool and dispense grease onto a piece of cardboard until it flows burp-free. If the handle doesn’t resist the pressure you put on it, there is air in the tool. Keep pumping until the flow is uninterrupted.
How to load a grease gun (Cartridge gun)?
Before loading a small grease gun, you must know how to story the gun cartridge. Always store the cartridge in such a way that the part that you tear off should be at the bottom. Thus, you're allowing the grease in the cartridge to get settled.
How to get grease out of a grease gun?
First of all, put the distal end of the grease gun into the grease container. After that, start withdrawing the plunger of the grease gun. However, make sure you're drawing the plunger slowly. At this point, you will see grease is pulling back into the barrel of the grease gun.
How to remove grease gun head?
Step 1: Unscrew the grease gun head. Firstly, separate the gun head from the cap while loading a reservoir grease gun. The grease gun has an applicator tube and a handle attached to the head of the gun. Separate these two parts of the head just by loosening it. Tip: make sure the handle of the piston rod is fully depressed.
How to remove cartridge from grease dispenser?
To remove the cartridge from the grease, you just have to follow these two simple steps. ● Firstly, turn the cartridge cap clockwise. ● Secondly, turn the dispenser in the anticlockwise direction. Tips: If the cap is screwed tightly, use some elbow grease to open it easily.
How to open a cap that is screwed tightly?
Tips: If the cap is screwed tightly, use some elbow grease to open it easily.
Do grease guns lubricate auto parts?
Grease guns do your job to lubricate the auto parts easily. However, you need to do proper loading of the grease cartridge. Otherwise, you may have to experience the empty cartridge during your work. I am saying this as I have experienced the same. So, you should learn how to load a grease gun. Stay stick to the article if you're eager ...
Can you load a grease gun?
Loading a reservoir grease gun may seem challenging to you . But it's a pretty straightforward method. You just need a large size container with a lot of grease in it. Follow these steps to learn how to put grease in a better quality grease gun.
How to remove air gaps from grease gun?
Air Gaps/Loss of Prime. Work the bleeder valve and pump the handle to try and remove any air left in the grease gun head. If you believe the bleeder valve is not functioning correct you may have to loosen the grease gun head from the canister holding the grease. BE SURE TO NOT UNTHREAD COMPELTELY AS GREASE WILL FREE COME OUT OF THE CANISTER CAUSING A MESS!!!
How to get bleeder back into grease gun?
Once the bleeder or value is open release the plunger and press the handle at the base of the grease gun fully back into the grease gun canister .
How to lock a grease gun?
Pull the handle at the rear of the grease gun to pull the plunger to the back of the canister. Lock the handle all the way back so the spring is fully compressed, and the plunger is at the rear of the canister. The handle can be locked in a few different ways depending on the type of grease gun, many have a secondary notch or small lever to lock the handle and spring assembly back.
What to do if grease leaking from grease gun?
Unfortunately this is a continuing problem with standard grease guns, the only remedy is to try a different grease, place the grease gun in a bag with a towel, or invest in a lube-shuttle® grease gun system.
Step 1. Grease Selection
Always use the right grease for the job at hand. Check with the manufacturer of the equipment you are lubricating to confirm compatibility and follow instructions on the grease tube. Nowadays there are specialty lubricants for different purposes and grease should be used for its intended purpose to get the best results.
Step 2. Preparation
Read and understand all the manufacturers’ instructions before you start the process, especially if it’s a new grease gun or it’s your first time loading it.
Step 3. Removing the Spent Cartridge
Grip the gun by its head and unscrew the end cap of the barrel by turning it clockwise and turning the dispenser nozzle counterclockwise. The barrel houses the grease gun cartridge and is the same size and shape as the cartridge.
Step 4. Cleaning the Grease Gun
Use this opportunity to clean up the grease gun. Some grease might have leaked out as you removed the spent cartridge and there is always a chance that dirt and debris will be built up on the barrel. Use a cloth or rag to wipe the end of the barrel, removing all the grease and dirt.
Step 5. Loading the New Cartridge in The Grease Gun
Prepare the new grease cartridge for loading. Determine which side of the cartridge you will open for the grease to flow out and shake it hard towards that side so that the grease can settle on that side. Remove the cartridge cap from this end to facilitate the free flow of grease.
Step 6. Priming the Grease Gun
Keep pumping the handle to release all the air from the system and get the grease started. Keep at it until grease starts to come out from the dispensing nozzle. It might take several pumps for the grease to start flowing, which is normal.
How to get grease out of a grease gun?
Depress the rod handle; this will force grease into the head of the grease gun and force air out.
Where to insert grease cartridge in a gun?
Insert the new grease cartridge into the barrel of the gun.
How to prime a grease gun if there is no relief valve?
If there is no air relief valve on your grease gun, do not tighten the head completely and push the rod handle several times to prime the gun. You can then tighten the head and proceed.
How to clean a nozzle on a gun?
Pump some grease through the nozzle and wipe it clean before attaching the nozzle to the gun.
Why use a grease gun?
A grease gun can be a handy tool for the home mechanic because car parts often need to be greased to reduce friction and increase the life of the part. A grease gun can inject grease into areas that are difficult to reach. Using a grease gun can be easy once you have taken it apart and loaded it. By doing this, you immediately see how the gun works and you are ready to use it with no further directions.
How to store grease gun?
Before storing your grease gun, release the air pressure. Store horizontally away from heat and moisture.
How to release a rod handle?
Release the rod handle by turning it out from the retaining groove in the end cap.
What is grease gun?
Grease is like caulk; really sticky, gooey, not-easy-to-clean caulk with packaging that can lay you open.
How to get grease out of a tool?
You may actually have to push it down through the grease. Tighten the tool and dispense grease onto a piece of cardboard until it flows burp-free. If the handle doesn’t resist the pressure you put on it, there is air in the tool. Keep pumping until the flow is uninterrupted.
What is the cheapest grease for a machine?
Only use premium grease, it is the cheapest part in the machine no matter how much it costs per tube. Use the right grease for the job. In modern equipment, specialty lubricants are sometimes specified. Check with the manufacturer of the equipment you’re using to get the correct recommendation.
How to rest a plunger on a tool?
Pull the plunger back (there is a spring inside being compressed when you do this—this is important to know later; more on it below) and rest it on the catch in the tool body .
Where is grease coming out of a gun?
This probably means that grease is behind the plunger seal, and if you persist, that grease will come out the back of the gun all over you and the shop floor. Go over to the trash can, get some clean rags handy, unscrew the cap over the trash can, and set the cap aside.
Is grease the cheapest part to use?
While it may seem like a nuisance to add grease to the fittings of large equipment and deal with the potentially messy job of how to load a grease gun, grease is the cheapest—by far—wear part in whatever equipment you’re using. Read this guide to learn how to load and use a grease gun.
Can grease be mixed?
DO NOT MIX GREASE TYPES unless you know what you are doing. Chemical incompatibility in lubricants can destroy bearings very quickly. Read more about determining grease compatibility, as well as this resource, to understand the concept in greater detail.
How to load grease gun?
How to Load a Grease Gun: Load first, burp second. Photo 1. Pack the head. Scoop any remaining grease out of the old cartridge and pack it into the head. Photo 2. Burp from the top. Unscrew the plug on the head of the gun, but keep it positioned directly over the hole. Screw it back in as soon as the air bubble clears.
Do air locks work on grease guns?
Avoid air locks and your grease gun will always work. Loading a new grease cartridge seems easy enough. But if you don't do it right, an air lock might keep grease from coming out when you pump the gun. Removing an air lock can be frustrating.
