Full Answer
How does a pintle hitch lock?
0:191:19Secure jobsite equipment with the pintle hitch lock - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd they simply come and hook up to the hitch and tow it away this little lock will block entranceMoreAnd they simply come and hook up to the hitch and tow it away this little lock will block entrance to the Pindell ring.
What is a pintle lock?
Our Pintle trailer lock secures trailers with Pintle rings and prevents the trailer from being hooked up and stolen. Protect your trailer with one of our California Immobilizer Pintle Locks! Solid steel design makes it impossible to access the hitch without the key.
How do you unlock a pintle hitch?
The pintle hook jaws lock around the lunette ring and are then secured with a safety pin (included). To remove a pintle hitch, simply remove the safety pin and open the hook to release the lunette ring.
Do you need safety chains with a pintle hitch?
Expert Reply: Yes, you will want to use safety chains when using a pintle hook such as # C48007.
What is likely to happen if the pintle hook is unlocked?
Never unlock the pintle hook with the dolly still under the rear trailer. The dolly tow bar may fly up, Page 3 possibly causing injury, and making it very difficult to re-couple. Couple tractor to first trailer.
Why do people use pintle hitches?
Pintle hitches are generally used for more heavy-duty towing jobs. They are more common in agricultural, military, and industrial trailers. Part of the reason for this is that they allow a greater range of movement that is more well-suited for off-road towing.
Why should you never unlock the pintle hook with the dolly still under the real trailer?
Never unlock the pintle hook with the dolly still under the rear trailer. The dolly tow bar may fly up, possibly causing injury, and making it very difficult to re-couple.
Is a pintle hitch better than a ball hitch?
Pintle hitches also allow for more movement at the attachment point than ball hitches. The range of movement provided by pintle hitches when attached to the lunette ring makes the hitch ideal for towing on uneven surfaces like off-road terrain.
How does a pintle hook work?
0:594:45Pintle Hitch | Mounting Options and Types - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis pintle hitch has an option for a lock pin which gives you an extra bit of reassurance that theMoreThis pintle hitch has an option for a lock pin which gives you an extra bit of reassurance that the hitch is closed and locked. Not all of them will come with this option.
What does a snubber do in a pintle hitch?
Air cushioned snubber is designed to minimize the gap between the pintle hook and the drawbar on vehicles with air systems.
What is the purpose of pintle?
A pintle is a pin or bolt, usually inserted into a gudgeon, which is used as part of a pivot or hinge. Other applications include pintle and lunette ring for towing, and pintle pins securing casters in furniture.
Are pintle hitches stronger?
Generally speaking pintle hitches are stronger, more ideally suited for abusive environments, and are more economical and offer higher degrees of freedom. Ball hitches fit snugger and tend to be quieter overall. At higher capacities pintle hitches have more products available.
What is the purpose of pintle?
A pintle is a pin or bolt, usually inserted into a gudgeon, which is used as part of a pivot or hinge. Other applications include pintle and lunette ring for towing, and pintle pins securing casters in furniture.
What is the meaning of pintle?
Verb. pintal. to paint, to apply paint. to paint over. (figuratively) to paint; to depict or portray.
What does a pintle hook connect to?
Pintle hitches allow a trailer with a lunette (eye) to be coupled to a vehicle with a pintle. In some trailer trains, the pintle is mounted on the rear of each trailer, allowing one trailer to follow another. The connection of the two vehicles is the soul purpose that the pintle hitch fills.
What is a pintle on a trailer?
A pintle hitch is a piece of towing hardware, usually in the form of a heavy duty hook and jawed lock, which is attached to the rear of a vehicle. A pintle hitch setup is generally the type of towing setup you use for heavy duty towing where a flexible link pivot is desired.
How Does a Pintle Hitch Work?
Pintle hitches work using two main components: a pintle hook and a lunette ring. The pintle hook attaches to the tow vehicle, and the lunette ring is bolted to the trailer being towed. The pintle hook jaws lock around the lunette ring and are then secured with a safety pin (included). To remove a pintle hitch, simply remove the safety pin and open the hook to release the lunette ring. Both your pintle hook and lunette ring should have a sufficient GTW rating to support the loaded weight of your trailer.
How Do I Convert from a Pintle Hitch to a Ball Coupler?
If you need to tow a trailer with a lunette ring, simply secure the hook around the lunette ring. If you need to tow a trailer with a traditional ball coupler, open the hook and attach your coupler to the hitch ball instead. Some combination mounts, such as the Convert-A-Ball option, come with three easily interchangable balls to match ball couplers of differing sizes.
How to tow a trailer with a ball coupler?
If you need to tow a trailer with a traditional ball coupler, open the hook and attach your coupler to the hitch ball instead. Some combination mounts, such as the Convert-A-Ball option, come with three easily interchangable balls to match ball couplers of differing sizes.
What is a stationary pintle hook?
In the case of towing, a stationary pintle hook provides the point around which a lunette ring is able to pivot, thus allowing for a greater range of motion compared to a traditional ball coupler.
Why do you need a separate mounting plate for a trailer?
Mounting plates provide multiple locations for attaching your pintle hook so that you can easily match your trailer height.
How to remove pintle hitch?
The pintle hook jaws lock around the lunette ring and are then secured with a safety pin (included). To remove a pintle hitch, simply remove the safety pin and open the hook to release the lunette ring.
Why are pintle hitches used?
Because of their superior weight capacity, pintle hitches are commonly used for industrial, military, or agricultural applications. Pintle hitches also allow for more movement at the attachment point than ball couplers do.
What Does A Pintle Hitch Look Like?
A pintle hitch is made of two main parts, the pintle hook, and the lunette ring. The pintle hook is the part that we generally refer to as the pintle hitch since it is the main component that is installed right on to the tow vehicle. The pintle hook goes on to the tow vehicle with the pintle facing up, such that the lunette ring can be easily lowered over the pintle.
How do pintle hooks work?
Pintle hooks also come with a swivel jaw that you can raise or lower to secure the lunette ring in place. The pintle hook jaw can be lowered to the top of the pintle to lock the lunette ring in place and prevent it from coming off. The jaw itself can be locked with a safety pin, which is inserted to a locking slot from the side.
How much weight can a pintle hitch hold?
Some Class V pintle hooks, for example, are rated for 12,000 pounds tongue weight capacity and a 60,000 gross trailer weight capacity. This means you can get around 20 percent tongue weight relative to the gross trailer weight with a pintle hook setup.
What is the advantage of a pintle hitch?
Compared to the usual ball mount hitches, pintle hitches generally come ahead when it comes to towing capacity and weight limit.
Why use pintle hitch?
That is why pintle hitches are particularly useful for towing heavier loads on rough roads, rugged terrain or similar conditions where you need a wider range of motion between the hitch and the coupler. A pintle hitch is an alternative to the usual tow ball mount, and it has its own advantages compared to the latter.
How much does a ball mount weigh?
Most manufacturers recommend a 10 to 15 percent tongue weight with respect to the gross trailer weight, so you can expect a ball mount rated for 20,000 pounds gross trailer weight to have a tongue weight rating of around 2,000 pounds. With pintle hitch setups, though, you can potentially get a higher tongue weight rating with the right setup.
Where is the pintle hook on a tow vehicle?
The pintle hook goes on to the tow vehicle with the pintle facing up , such that the lunette ring can be easily lowered over the pintle. Depending on the type of vehicle and pintle hitch kit you have, you can have the pintle hook installed to the bumper, or to the frame of the tow vehicle itself.
What is a combination pintle hitch?
Combination pintle hitch / ball allows the user to tow trailers with both loop type couplers and socket couplers. without any changes to the pintle hitch.
What is adjustable pintle hitch?
Adjustable height pintle hitches commonly used in conjunction with a reciever tube to give the further functionality of adjusting the coupler height. A good example would be when there is a need to tow a boat trailer, a utility trailer and a camper all with the same vehicle.
How to connect pintle hitch to trailer?
When it comes time to connect your pintle hitch to the trailers lunette (eye), go through your safety checks. Next, remove the safety locking pin. Release the latch and pivot it up and out of the way. Take the eye and lay it into the hook of the pintle hitch. Release and lower the latch. Last, but not least reinsert the safety locking pin.
What is a pintle hitch?
Pintle hitches are robust mechanical devices used to couple wheeled equipment together to facilitate towing. Pintle hitches have three distinct parts. A rigid frame called the body. A pivoting latch that gives access to the body and a positive locking pin that secures the latch in the closed position.
Why use pintle hitches?
Pintle hitches are used in the military for a few good reasons. They have a high strength to weight ratio. They positively lock both with a spring loaded latch, and a safety pin. The safety pin is a visual indicator that the hitch is locked. The latch / pin locking system creates two points of failure that would have to take place for the hitch to accidently open. The slop in between the pintle and the loop allows more degrees of articulation when traveling over rough terrain. The pintle / loop connection is easier, and faster to make than using a ball and socket system. A pintle hitch can be used as an attachment point for a winch when extracting a vehicle.
What is a reciever hitch?
Reciever mounted pintle hitch are well suited for vehicles that need to have couplers suited for multiple trailer types. There is a reciever tube permanently mounted to the vehicle that allows the operator to quickly switch out couplers, or just totally remove the coupler all together.
What is a platform truck?
Platform trucks are low cost, efficient and versatile pieces of material handling equipment. They consist of a horizontal platform supported by wheels used to facilitate motion through force applied...
What is a pintle hook?
Forged steel pintle hook provides a strong and durable attachment point for your trailer equipped with a lunette ring coupler. Black powder coat finish resists rust and corrosion.Features: Pintle hook provides an attachment point for your trailer equipped with a lunette ring coupler Forged steel construction is strong and durable Black powder coat finish resists rust ...
How much weight can you haul with a pintle hook?
Flip and stow this pintle hook combo beneath your hitch for a sleek look when you are done towing. Haul up to 16,000 lbs with the pintle hook or up to 10,000 lbs with the 2" ball.Features: Pintle hook and hitch ball combo lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver Pintle hook connects to lunette ring couplers Hitch ball connects ...
What size ball to use for a 3" hitch?
Insert this heavy-duty mount into your 3" hitch to get 3 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch -mounted accessory ...
How much weight can a pintle hook and hitch ball haul?
This pintle hook and hitch ball combo lets you haul up to 20,000 lbs with either the 2-5/16" chrome-plated hitch ball or with the pintle. Mounts to your channel-style shank. Powder coated forged ...
What hitch do you use with a straight tongue coupler?
Ideal for the rigors of off-road towing or overlanding, this fully articulating straight-tongue coupler pairs with a vehicle-side Lock N Roll hitch (sold separately) to form an extra-strong ...
How long is a pintle hook?
This 14-3/4" long pintle hook fits inside your 2-1/2" x 2-1/2" trailer hitch receiver so you can quickly and easily equip your vehicle for pintle -style towing. 20,000-lb Capacity ...
What is the difference between a Reese Revolution and a Sidewinder Pin Box?
It is simply called a Revolution when it comes as OEM/factory equipment on a trailer. The aftermarket product is called the Sidewinder. There are some very minor differences… view full answer...
